Synthesis and ex-situ evaluation of quaternized polysulfone as an anion exchange ionomer for AEM technologies

Anion exchange ionomer (AEI) is a critical component used on anion exchange membrane fuel cell (AEMFC) and alkaline water electrolyzer (AWE). In this work, quaternized polysulfone with different functionalization degree were used as an ionomer to evaluate the performance in the oxygen reduction reaction (ORR) and hydrogen oxidation reaction (HOR), both implied in the operation of AEMFC and AWE. The synthesized ionomer exhibited a better performance in both reactions in comparison to the commercial AEI Aemion®. PSf-130 exhibited better performance, since IEC and surface area increases twice regarding the same parameters in the PSf-60. The PSf-130 conductivity increases three times regarding the value exhibited by PSf-60. Finally, the J_lim and J_k increases 67% and 100% for ORR. On the other hand, the same catalytic parameter increased 44% and 35% for HOR comparing both polysulfone-based ionomers. The Tafel slope values do not showed drastically changes for different ionomers indicating the same rate determining step (RDS) and the same mechanism in both reactions for all the ionomers.     

Quasi-Diamond Platelet-Shaped Zinc Oxide Nanostructures Display Enhanced Antibacterial Activity

The current study compares the antibacterial activity of zinc oxide nanostructures (neZnO). For this purpose, two bacterial strains, Escherichia coli (ATCC 4157) and Staphylococcus aureus (ATCC 29213) were challenged in room light conditions with the aforementioned materials. Colloidal and hydrothermal methods were used to obtain the quasi-round and quasi-diamond platelet-shape nanostructures. Thus, the oxygen vacancy (V_O) effects on the surface of neZnO are also considered to assess its effects on antibacterial activity. The neZnO characterization was achieved by X-ray diffraction (XRD), a selected area electron diffraction (SAED) and Raman spectroscopy. The microstructural effects were monitored by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, optical absorption ultraviolet visible spectrophotometry (UV-Vis) and X-ray photoelectron spectroscopy (XPS) analyses complement the physical characterization of these nanostructures; neZnO caused 50 % inhibition (IC₅₀) at concentrations from 0.064 to 0.072 mg/mL for S. aureus and from 0.083 to 0.104 mg/mL for E. coli, indicating an increase in activity against S. aureus compared to E. coli. Consequently, quasi-diamond platelet-shaped nanostructures (average particle size of 377.6±10 nm) showed enhanced antibacterial activity compared to quasi-round agglomerated particles (average size of 442.8±12 nm), regardless of Vo presence or absence.     

Hydroxyl end-functionalized poly(2-isopropyl oxazoline)s used as nano-sized colloidal templates for preparation of hollow polymeric nanocapsules

Hollow polymeric nanocapsules with a thermosensitive membrane are prepared and characterized. They reversibly change their dimensions during temperature variations below and above the transition of the membrane. The nanocapsules were prepared by three steps: (i) well-defined mesoglobules prepared from an LCST polymer (hydroxyl end functionalized poly(2-isopropyl-2-oxazoline), PiPOZ-OH) were coated with a thermo-sensitive cross-linked shell formed via seeded radical copolymerization of N-isopropylacrylamide (NIPAM) and N,N′-bis-methylene acrylamide to produce core–shell nanoparticles (ii), which were subjected to extensive dialysis below the LCSTs of both the core-forming PiPOZ-OH and shell-forming PNIPAM to remove the core (iii). The use of a core-forming polymer of low molecular weight (<8900 g mol⁻¹), narrow dispersity (<1.15) and relatively low T_g (52–68 °C) is beneficial as far as the effectiveness of the removal of the cores is concerned. The inherent immiscibility between PiPOZ-OH and PNIPAM as well as the specific raspberry-like structure of the core–shell particles also contributed for enhancement of the core removal effectiveness.     

Aqueous Gelcasting of Fused Silica Using Colloidal Silica Binder

An aqueous‐based gelcasting of fused silica ceramics by using colloidal silica binder was developed. Fused silica slurries having different volume percentage of solid loading from 63 to 74 vol% in colloidal silica were made and the rheological properties were evaluated. It was found that the slurry with 73 vol% of solid loading with viscosity 0.70 Pa.s is suitable for this gelcasting system. The influence of solid loading on physical and mechanical properties of gelcast green and sintered bodies has been studied. The fabricated green body by using colloidal silica binder exhibited a flexural strength of 9 MPa and 88% of theoretical density with 2.2% of drying shrinkage while the sintered sample exhibited flexural strength of 60 MPa and 95% of theoretical density with 4.3% of sintering shrinkage. It was observed that, the nano silica particles from the colloidal silica binder is filling the interstitial positions in the consolidated fused silica green body and enhancing physical and mechanical properties.     

Graphitic Carbon in Snow

We collected several samples of fresh snow from the areas of southern New Mexico and western Texas. Samples were analyzed to determine graphitic carbon content of snow in rural and urban areas and to compare these present values with those obtained from deep ice core samples several thousand years old. To model the optical properties of snow grains containing carbon we used several different versions of effective medium approximations. Calculations are compared with microwave analog measurements to determine which of these approximations can reasonably well predict the properties of mixtures such as snow and carbon. Suggestions regarding which of the effective medium approximations that should not be used are presented.     

Improved Determination of Bimodal Size Distributions from Measurements with Diffusional Size Classification

The size distribution of the unattached fraction of the short-lived radon progeny is reported in the literature to have a bimodal structure. Due to the weak size resolution of diffusional size classification, a wide variety of bimodal size distributions yields similar measurement results, obstructing the reconstruction of size distribution parameters from measured data. For example, it could be shown that although 2 of the commonly used nonlinear approximation algorithms per formed well for the reconstruction of a monomodal size distribution, the reproduc tion of parameters of a bimodal size distribution was unsatisfactory. In conse quence, a "random walk" approach is presented. The basic idea for this approach consists of probing the complete parameter space as an ideal method for locating the best set of parameters. Additionally, 2 steps are introduced for the reduction of computation time to render the ideal approach to an applicable method. The range of geometric standard deviations for the calculation was restricted to values between 1 and 5. The range of median diameters was limited according to the penetration functions of the diffusional samplers. This restricted volume of param eter space was subdivided into 10⁴ cells. During the calculation, cells with exceptionally large values of the minimization functional were eliminated from further computation. Compared to the results of EM and Simplex algorithms, this ''random walk'' method was able to retrieve parameters of both monomodal and bimodal size distributions with improved accuracy.     

Modeling of Drying Curves for Some Foodstuffs Using a Kinetic Equation of High Order

ABSTRACT

Non-linear regression was used to fit a high order kinetic model to drying curves for mango and cassava. For comparison purposes, the same experimental data were also adjusted by non-lines regression to a model based on exponential series, and to another exponential model by simple linear regression. The high order model fit the experimental data with higher precision (r2 Al.98) than the other exponential series models. The proposed higher order model is mathematically simple as compared to the exponential series, and could be used for simulation of drying processes.     

Electrochemical reactivity at graphitic micro-domains on polycrystalline boron doped diamond thin-films electrodes

This paper deals with the electrochemical reactivity of boron doped diamond (BDD) electrodes. A comparative study has been carried out to show the influence of the presence of graphitic micro-domains upon the surface of these films. Those graphitic domains are sometimes present on as-grown boron doped diamond electrodes. The effect of doping a pure Csp³ diamond electrode is established by highly oriented pyrolytic graphite (HOPG) abrasion onto the diamond surface. In order to establish the effect of doping on a pure Csp³ diamond electrode, the amount of graphitic domains was increased by means of HOPG crystals grafted onto the BDD surface. Indeed that method allows the enrichment of the Csp² contribution of the electrode.The presence of graphitic domains can be correlatively associated with the presence of kinetically active redox sites. The electrochemical reactivity of boron doped diamond electrodes shows a distribution of kinetic constants on the whole surface of the electrode corresponding to different active sites. In this paper, we have studied by cyclic voltammetry and electrochemical impedance spectroscopy the kinetics parameters of the ferri/ferrocyanide redox couple in KCl electrolyte. A method is proposed to diagnose the presence of graphitic domains on diamond electrodes, and an electrochemical “pulse cleaning” procedure is proposed to remove them.     

Myo-InositolTrisPyroPhosphate treatment leads to HIF-1α suppression and eradication of early hepatoma tumors in rats

Myo-inositol trispyrophosphate (ITPP), a synthetic allosteric effector of hemoglobin, increases the regulated oxygen-releasing capacity of red blood cells (RBCs), leading to suppression of hypoxia-inducible factor 1α (HIF-1α) and to down-regulation of hypoxia-inducible genes such as vascular endothelial growth factor (VEGF). As a consequence, tumor growth is markedly affected. The effect of weekly intravenous injection of ITPP on an orthotopic, syngenic rat hepatocellular carcinoma (HCC) model was compared to that for untreated animals and animals subjected to conventional Doxorubicin chemotherapy. The longitudinal examination of HCC was performed by microCT imaging, and the cellular and molecular changes were evaluated by histology and Western blotting analysis of HIF-1α, VEGF, and caspase-3 gene expression in the tumor and in the surrounding liver. Hematologic impact was evaluated by blood cell-count measurement and determination of P50 (oxygen partial pressure for a 50 % oxygen saturation of hemoglobin). The HCC evaluation by microCT revealed a high potency of ITPP for tumor growth inhibition, thus allowing long-term survival and even cure of almost all the treated animals. The P50 value of hemoglobin in RBCs underwent a shift of 30 % following ITPP injection. Under these conditions, HIF-1α activity was strongly decreased, VEGF expression was down-regulated, and apoptosis was induced in HCC and surrounding liver cells, as indicated by Caspase-3 expression. ITPP did not affect hematologic parameters during treatment. The observations of in vivo tumor eradication suggest a significant clinical potential for ITPP in cancer therapy.     

Electrical conductivity and mechanical strength of composites consisting of phenolic resin,carbon fibers,and metal particles

Composites of phenolic resin of novolac type as matrix, with metal particles of Zn as conducting filler, without or with 15% v/v carbon fibers were manufactured by hot pressing. The porosity ratio, the hardness, the flexural and shear strength, and the electrical conductivity of the composites were determined. The percolation threshold was determined based on two models of electrical conductivity versus the content of metal particles of Zn, namely, an analogous to polymer gelation model and the other based on the power law. The composites of carbon fibers combined with Zn particles have higher electrical conductivity than the corresponding without carbon fibers and high strength, lower than that of the composite reinforced with carbon fibers without Zn particles, but still acceptable. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011