Flow and heat transfer in serpentine channels

Serpentine channels are often used in microchannel reactors and heat exchangers. These channels offer better mixing, higher heat and mass‐transfer coefficients than straight channels. In the present work, flow and heat transfer experiments were carried out with a serpentine channel plate comprising of 10 units (single unit dimensions: 1 × 1.5 mm² in cross section, length 46.28 mm, D_h 1.2 mm) in series. Pressure drop and heat‐transfer coefficients were experimentally measured. Flow and heat transfer in the experimental set‐up were simulated using computational fluid dynamics (CFD) models to understand the mechanisms responsible for performance enhancement. The CFD methodology, thus, developed was applied to understand the effect of various geometrical parameters on heat transfer enhancement. A criterion was defined for evaluation of heat transfer performance (heat transfer per unit pumping power), thus, ensuring due considerations to required pumping power. The effect of geometrical parameters and the corresponding mechanisms contributing for enhancement are discussed briefly. Based on the results, a design map comprising different serpentine channels showing heat transfer enhancement with pumping power was developed for Reynolds number of 200 which will be useful for further work on flow and heat transfer in serpentine channels. © 2012 American Institute of Chemical Engineers AIChE J, 59: 1814–1827, 2013     

Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography

We show how to employ an interference lithographic template (ILT) as a facile mold for fabricating three-dimensional bicontinuous PDMS (poly(dimethylsiloxane)) elastomeric structures and demonstrate the use of such a structure as a mechanically tunable PDMS/air phononic crystal. A positive photoresist was used to make the ILT, and after infiltration with PDMS, the resist was removed in a water-based basic solution which avoided PDMS swelling or pattern collapse occurring during the ILT removal process. Since the period of the structure is approximately 1 microm, the density of states of gigahertz phonons are altered by the phononic PDMS/air crystal. Brillouin light scattering (BLS) was employed to measure phononic modes of the structure as a function of mechanical strain. The results demonstrate that the phononic band diagram of such structures can be tuned mechanically.     

Non-Newtonian power-law flow and heat transfer across a pair of side-by-side circular cylinders

Flow and heat transfer of non-Newtonian power-law fluids across a pair of identical circular cylinders in side-by-side arrangement are investigated numerically by solving the continuity, momentum and energy equations along with the appropriate boundary conditions. The numerical calculations are performed in an unconfined computational domain for the following range of physical parameters: Reynolds number, Re = 1–40 and power-law index, n = 0.4–1.8 (covering shear-thinning, n < 1; Newtonian, n = 1 and shear-thickening, n > 1 behaviors) for gap ratio, T/D = 1.5–4.0 at a constant Prandtl number of 50. The global characteristics such as drag coefficients and average Nusselt number, etc. are calculated and the representative streamline and isotherm contours are presented for the above range of conditions. It has been found that the individual and overall drag coefficients decrease and the average Nusselt number increases with Reynolds number for all T/D and n considered here. The heat transfer is found higher in shear-thinning fluids than Newtonian fluids and followed by shear-thickening fluids for 1.5 ? T/D ? 4.0 and 1 ? Re ? 40.     

Vicarious perception of postural discomfort and exertion

Perceived exertion and discomfort have been used extensively in ergonomics practice. Job incumbents typically rate their exertion on scales such as Borg's rated perceived effort (RPE) and their discomfort on scales such as Corlett and Bishop's body part discomfort scales (BPD). This study asks whether exertion and discomfort can be perceived by an external observer, i.e. is vicarious perception possible? Four participants (targets) performed 20 postural holding tasks selected from Ovako Working Posture Analysing System postures and gave RPE and BPD scores for each posture. Video clips of each target in each posture were shown to four expert ergonomists and 23 novices, who also gave RPE and BPD scores. Correlations between targets and observers scores were high, with significance exceeding p = 0.01. Observers were generally conservative, rating easy postures too high and difficult postures too low. All observers rated female targets higher than male targets. Female observers rated all targets higher then male observers. Vicarious perception of discomfort and exertion was possible, but there was not a one-to-one correspondence to ratings given by those experiencing the posture.     

Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors

Hardening and embrittlement are controlled by interactions between dislocations and irradiation induced defect clusters. In this work we employ the visco plastic self consistent (VPSC) polycrystalline code in order to model the yield stress dependence in ferritic steels on the irradiation dose. We implement the dispersed barrier hardening model in the VPSC code by introducing a hardening law, function of the strain, to describe the threshold resolved shear stress required to activate dislocations. The size and number density of the defect clusters varies with the irradiation dose in the model. We find that VPSC calculations show excellent agreement with the experimental data set. Such modeling efforts can both reproduce experimental data and also guide future experiments of irradiation hardening.     

Primal–Dual Algorithms for Connected Facility Location Problems

We consider the Connected Facility Location problem. We are given a graph $G = (V,E)$ with costs $\{c_e\}$ on the edges, a set of facilities $\F \subseteq V$, and a set of clients $\D \subseteq V$. Facility $i$ has a facility opening cost $f_i$ and client $j$ has $d_j$ units of demand. We are also given a parameter $M\geq 1$. A solution opens some facilities, say $F$, assigns each client $j$ to an open facility $i(j)$, and connects the open facilities by a Steiner tree $T$. The total cost incurred is ${\sum}_{i\in F} f_i+ sum_{j\in\D} d_jc_{i(j)j}+M\sum_{e\in T}c_e$. We want a solution of minimum cost. A special case of this problem is when all opening costs are 0 and facilities may be opened anywhere, i.e., $\F=V$. If we know a facility $v$ that is open, then the problem becomes a special case of the single-sink buy-at-bulk problem with two cable types, also known as the rent-or-buy problem. We give the first primal–dual algorithms for these problems and achieve the best known approximation guarantees. We give an 8.55-approximation algorithm for the connected facility location problem and a 4.55-approximation algorithm for the rent-or-buy problem. Previously the best approximation factors for these problems were 10.66 and 9.001, respectively. Further, these results were not combinatorial—they were obtained by solving an exponential size linear rogramming relaxation. Our algorithm integrates the primal–dual approaches for the facility location problem and the Steiner tree problem. We also consider the connected $k$-median problem and give a constant-factor approximation by using our primal–dual algorithm for connected facility location. We generalize our results to an edge capacitated variant of these problems and give a constant-factor approximation for these variants.