The Defining Role of Micro-fissures on the Mechanical Behavior of Laser-Welded Fully Austenitic Stainless Steel

Metallurgical and Materials Transactions A - Laser-welded fully austenitic stainless steel (AISI 316LN) weldments revealed the presence of micro-fissures. They appeared at the grain boundaries,...     

Development of a stable source of atomic oxygen with a pulsed high-voltage discharge and its application to crossed-beam reactions

To investigate the reactions of oxygen atoms with ethene and silane in a crossed-beam condition, we developed a stable, highly intense, and short-pulsed source of atomic oxygen with a transient high-voltage discharge. Mixtures of O(2) and He served as discharge media. Utilizing a crossed molecular-beam apparatus and direct vacuum-ultraviolet ionization, we measured the temporal profiles of oxygen atoms and the time-of-flight spectra of reaction products. With O(2) 3% seeded in He as a discharge medium, oxygen atoms might have a full width as small as 13.5 micros at half maximum at a location 193 mm downstream from the discharge region. Most population of oxygen atoms is in the ground state (3)P but some in the first excited state (1)D, depending on the concentration of precursor O(2). This discharge device analogously generates carbon, nitrogen, and fluorine atoms from precursors CO, N(2), and F(2), respectively.     

Threshold tensile strength and modulus of carbon-black-filled rubber vulcanizates

The threshold tensile strength and modulus of carbon-black-filled natural rubber and styrenebutadeine rubber vulcanizates have been determined. N-220, N-330, N-375, N-550 and N-660 carbon blacks at various loadings have been used. The threshold strength varies between 0.4 MPa for gum vulcanizate to 3 Mpa for 50 phr loaded samples. Both the threshold strength and modulus are dependent on the nature and loading of the filler. The theoretical and experimental values of threshold strength and modulus are in good agreement.     

Hydrogen peroxide formation in the interaction of oxygen with boron-containing Pd catalysts prereduced by hydrazine in aqueous acidic medium containing bromide anions

Interaction of molecular oxygen with Pd/BPO₄ or ZrO₂ (or Al₂O₃, CeO₂, TiO₂) - B₂O₃ catalysts, prereduced by hydrazine hydrate, in an aqueous acidic (H₂SO₄ or H₃PO₄) reaction medium containing bromide ions leads to the formation of H₂O₂. However, in the absence of boron in the catalyst and also in the absence of acid and/or bromide ions in the reaction medium, almost no H₂O₂ is formed.     

Properties of poly(AAc‐co‐HPMA‐cl‐EGDMA) hydrogel‐bound lipase of Pseudomonas aeruginosa MTCC‐4713 and its use in synthesis of methyl acrylate

Microbial lipases (E.C. 3.1.1.3) are preferred biocatalysts for the synthesis of esters in organic solvents. Various extracellular thermoalkaliphilic lipases have been reported from Pseudomonas sp. In the present study, a purified alkaline thermoalkalophilic extracellular lipase of Pseudomonas aeruginosa MTCC‐4713 was efficiently immobilized onto a synthetic poly(AAc‐co‐HPMA‐cl‐EGDMA) hydrogel by adsorption and the bound lipase was evaluated for its hydrolytic potential towards various p‐nitrophenyl acyl esters varying in their C‐chain lengths. The bound lipase showed optimal hydrolytic activity towards p‐nitrophenyl palmitate (p‐NPP) at pH 8.5 and temperature 45°C. The hydrolytic activity of the hydrogel‐bound lipase was markedly enhanced by the presence of Hg²⁺, Fe³⁺, and NH salt ions in that order. The hydrogel‐immobilized lipase (25 mg) was used to perform esterification in various n‐alkane(s) that resulted in ～ 84.9 mM of methyl acrylate at 45°C in n‐heptane under shaking (120 rpm) after 6 h, when methanol and acrylic acid were used in a ratio of 100 mM:100 mM, respectively. Addition of a molecular sieve (3Å × 1.5 mm) to the reaction system at a concentration of 100 mg/reaction vol (1 mL) resulted in a moderate enhancement in conversion of reactants into methyl acrylate (85.6 mM). During the repetitive esterification under optimum conditions, the hydrogel‐bound lipase produced 71.3 mM of ester after 10th cycle of reuse. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 183–191, 2007     

Adaptive Decode-and-Forward Protocol Based Cooperative Spectrum Sensing in Cognitive Radio with Interference at the Secondary Users

In this paper a novel multiple-user cooperative spectrum sensing scheme (MCSS) based on hybrid relay is proposed to achieve the spatial diversity gain in detection of the primary user (PU) in a cognitive radio (CR) network. A practically important case where co-channel interference signals are present at the network is considered for the analysis. Closed-form expressions of detection probability \((\hbox {P}_{\mathrm{d}})\) and false alarm probability \((\alpha )\) for the proposed adaptive decode-and-forward based multiple-user cooperative spectrum sensing scheme (ADF-MCSS) using energy detector over Rayleigh fading sensing channels is derived in presence of co-channel interference at the secondary user which is far away from the PU. Further we extend the concept of two user amplify-and-forward (AF) and decode-and-forward (DF) cooperative spectrum sensing schemes in multiple-user scenario (i.e. AF-MCSS and DF-MCSS) over Rayleigh fading channels when the secondary user (which is far away from PU) is affected by interference. Closed-form expressions of AF-MCSS and DF-MCSS schemes over a Rayleigh fading channels are also evaluated and compared with that of proposed ADF-MCSS in presence of interference signals at the secondary user. Further the performance analysis of AF-MCSS, DF-MCSS and ADF-MCSS schemes are compared with the existing non-cooperative spectrum sensing schemes in presence of interference at the secondary user. Our analysis is validated by numerical and simulation results for multiple-user CR network. The impact of number of cooperative relays, SNR in sensing channel, energy of interference signal, false alarm on detection probability in proposed ADF, AF and DF schemes is shown.     

Comparison and evaluation of code clone detection techniques and tools: A qualitative approach

Over the last decade many techniques and tools for software clone detection have been proposed. In this paper, we provide a qualitative comparison and evaluation of the current state-of-the-art in clone detection techniques and tools, and organize the large amount of information into a coherent conceptual framework. We begin with background concepts, a generic clone detection process and an overall taxonomy of current techniques and tools. We then classify, compare and evaluate the techniques and tools in two different dimensions. First, we classify and compare approaches based on a number of facets, each of which has a set of (possibly overlapping) attributes. Second, we qualitatively evaluate the classified techniques and tools with respect to a taxonomy of editing scenarios designed to model the creation of Type-1, Type-2, Type-3 and Type-4 clones. Finally, we provide examples of how one might use the results of this study to choose the most appropriate clone detection tool or technique in the context of a particular set of goals and constraints. The primary contributions of this paper are: (1) a schema for classifying clone detection techniques and tools and a classification of current clone detectors based on this schema, and (2) a taxonomy of editing scenarios that produce different clone types and a qualitative evaluation of current clone detectors based on this taxonomy.     

Correction to: Do Energy Resources matter for Growth Level? The dynamic effects of different strategies of renewable energy,carbon emissions on sustainable economic growth

Clean Technologies and Environmental Policy -     

Do Energy Resources matter for Growth Level? The dynamic effects of different strategies of renewable energy,carbon emissions on sustainable economic growth

Clean Technologies and Environmental Policy - This study examines the association between renewable energy strategies and carbon emissions on sustainable economic growth under affordable and clean...