The effect of surface recombination on the frequency-dependentcharacteristics of an ion-implanted GaAs OPFET

The effect of modulation frequency and surface recombination on the characteristics of an ion-implanted GaAs OPFET is determined analytically. The drain-source current is found to decrease with the increase in both modulation frequency and trap center density. The current changes significantly with the trap center density only when the latter is greater than 10²⁰/m². The threshold voltage does not change appreciably with the modulation frequency as in a silicon OPFET. However, the increased in the trap center density causes V_T to increase in the enhancement device and decrease in the depletion device. Further, V_T increases under the normally ON condition and decreases under the normally OFF condition with an increase in the photon absorption coefficient in GaAs. Some anomalous behavior is observed for higher values of the absorption coefficient     

Effects of solid-state annealing on the interfacial intermetallics between tin-lead solders and copper

The interfacial intermetallics between Cu and solder were studied for four Sn-Pb compositions at the annealing temperatures of 125°C, 150°C, and 175°C for up to 30 days. The η-phase (Cu₆Sn₅) layer formed during reflow continues to grow during annealing. An additional layer of ɛ-phase (Cu₃Sn) forms at the η/Cu interface after an incubation annealing time. The thickness results fit a power-law relationship against time with average exponents 0.69 and 0.44 for the η phase and the ɛ phase, respectively. On prolonged annealing, the proportions of the individual phases in the total layer reach a steady state.     

A DELAY-LINE CANCELLATION METHOD FOR CLUTTER ATTENUATION AND ELIMINATION OF BLIND SPEED

In this paper, a conceptual schematic for the search radar has been presented which offers clutter cancellation as well as blind speed elimination. It is assumed that the radar is performing conical scan in both azimuth and elevation. For such cases, strong clutter signals are likely to be intercepted from off-boresight angles. A pulse-to-pulse comparison method is presented where the radar transmits and receives SUM beam during the first pulse and DIFFERENCE beam in the second pulse. The detected voltages for the echoes received during the pulse intervals are subtracted from each other and the negative voltage at the output of subtractor is discarded. This result in a narrow beam pointed in the direction of angle of arrival. This method, in receive only mode, can also be used for calibration of large phased arrays.     

SiC power diodes provide breakthrough performance for a wide rangeof applications

The electrical performance of silicon carbide (SiC) power diodes is evaluated and compared to that of commercially available silicon (Si) diodes in the voltage range from 600 V through 5000 V. The comparisons include the on-state characteristics, the reverse recovery characteristics, and power converter efficiency and electromagnetic interference (EMI). It is shown that a newly developed 1500-V SiC merged PiN Schottky (MPS) diode has significant performance advantages over Si diodes optimized for various voltages in the range of 600 V through 1500 V. It is also shown that a newly developed 5000 V SiC PiN diode has significant performance advantages over Si diodes optimized for various voltages in the range of 2000 V through 5000 V. In a test case power converter, replacing the best 600 V Si diodes available with the 1500 V SiC MPS diode results in an increase of power supply efficiency from 82% to 88% for switching at 186 kHz, and a reduction in EMI emissions     

Energy-optimized cluster head selection based on enhanced remora optimization algorithm in underwater wireless sensor network

With the technological advancements, wireless sensor network (WSN) has played an impeccable role in monitoring the underwater applications. Underwater WSN (UWSN) is supported by WSN but subjected to data dissemination in an acoustic medium. Due to challenging conditions in underwater scenario, the limited battery resources of these sensor nodes stem to a crucial research problem that needs to address the energy-efficient routing in UWSN. In this research work, we intend to propose an energy-optimized cluster head (CH) selection based on enhanced remora optimization algorithm (ECERO) in UWSN. Since CH devours the maximum energy among the nodes, we perform selection of CH based on EROA while considering energy, Euclidean distance from sink, node density, network's average energy, acoustic path loss model and lastly, the adaptive quantity of CHs in the network. Further, to reduce the load on CH node, we introduce the concept of sleep scheduling among the closely located cluster nodes. The proposed work improves the performance of recently proposed EOCSR algorithm by great magnitude which claims to mitigate hot-spot problem, but EOCSR still suffers from the same due to relaying a large magnitude of data.     

Unified BER and optimum threshold analysis of binary modulations in simple and cascaded Rayleigh fading channels with switched combining

Following a unified analytical framework, the bit error rate (BER) of several coherent and non‐coherent binary modulation schemes is derived for a switched diversity system. The two variants of switched combining that have been investigated are switch and stay combining and switch and examine combining. For channel modelling, at first a simple slow flat fading channel is assumed, where the amplitude attenuation obeys the Rayleigh distribution. Later the BER calculations are repeated for cascaded Rayleigh fading channel case. Rayleigh fading is the most popular model for electromagnetic signal propagation in wireless media when both or either of the transmitter/receiver is fixed. On the other hand, when both the transmitter and the receiver are mobile, a cascaded (or double) Rayleigh fading model is better suited. The applicability of these two models, namely simple and cascaded Rayleigh model, has been indicated by several theoretical studies and their suitability is established by various field measurements. In our paper, simple closed‐form BER expressions as a function of switching threshold have been found and optimum switching thresholds have been computed for both these models as well as for both types of diversity combining described earlier. The results presented in this paper can be very useful for communication system designers to analyze link quality of switched diversity assisted systems in various wireless environments. Copyright © 2010 John Wiley & Sons, Ltd.     

Impact of L2 Triggering Time on Handover Performance for 4G Wireless Networks

4G wireless networks are based on All-IP architecture integrating cellular networks, Wireless local area networks, Worldwide Interoperability for Microwave Access, Wireless ad hoc networks, and Wireless Personal Area Networks etc. This makes seamless handover an important issue for users roaming among these networks. Anticipation of future events based on layer 2 (L2) trigger information is the basic principle of fast handover. It incurs higher signaling costs compared with the other protocols like Mobile IPv6 and Hierarchical Mobile IPv6. L2 trigger is based on fluctuating wireless channel states. Therefore, the handover anticipation using L2 trigger may sometimes be incorrect. Unnecessary buffer space is used for providing a smooth handover in the case of incorrect anticipation. Therefore, it is very important to analyze overhead costs and compare the performance of IP based handover protocols. This paper investigates the impact of L2 triggering time on the signaling cost, packet delivery cost, total overhead cost, and buffer space. Results show that Session to mobility ratio, L2 trigger time and number of subnets are determining parameters for optimizing handover performance.     

Load Balanced Congestion Adaptive Routing for Randomly Distributed Mobile Adhoc Networks

In mobile ad hoc networks, congestion occurs due to limited sources of the network, which leads to packet losses, bandwidth degradation and wastes time and energy on congestion recovery. Various techniques have been developed in attempt to minimize congestion in uniformly distributed networks. In this paper, a load balanced congestion adaptive routing algorithm has been proposed for randomly distributed networks. In the proposed algorithm two metrics: traffic load density and life time associated with a routing path, have been used to determine the congestion status and weakest node of the route. The route with low traffic load density and maximum life time is selected for packet transmission.     

Consequences of structural disorder on laser properties in quantumwire lasers

The effect of interface-roughness-related disorder on the electronic and optoelectronic properties of a quantum wire structure are studied. It is seen that the disorder causes strong localization in the quasi-one-dimensional system. While the electronic states are seriously perturbed, the density of states is not affected drastically. Optoelectronic properties as reflected in the interband transition related phenomenon are not found to suffer significant deterioration as a result of the disorder. However, the results suggest that intraband relaxation processes may be seriously affected because of electron (hole) states being localized in different regions of the wire     

A model of front-illuminated n+-p-p+high-efficiency silicon solar cell

A realistic model of a front-illuminated n⁺-p-p⁺ silicon solar cell is developed by solving the current continuity equations for minority carriers in the quasi-neutral regions in steady state, assuming the light in the cell is trapped as a result of multiple reflections at the front and the back of the cell. This model is used to study the effects of the front emitter thickness and doping level and the light trapping on the J-V characteristic and thereby on the open-circuit voltage, short-circuit current density, curve factor, and the efficiency of the cell. A textured cell with an emitter thickness in the range of 0.3-1.0 μm with its doping ≈5×10¹⁸ cm^-3 and the recombination velocities of minority carriers as large as 200 cm/s at the n⁺ front surface and 10 cm/s at the back of the p base can exhibit an efficiency in excess of 26% (under AM 1.5 sunlight of 100 mW/cm² intensity) at 25°C if the light reflection losses at the front surface can be made small