An intelligent traffic control system using RFID

Vehicular traffic control at road crossings has always been a matter of concern for administrations in many modern cities around the world. Several attempts have been made to design efficient automated systems to solve this problem. Most of the present day systems use predetermined timing circuits to operate traffic signals, which are not very efficient because they do not operate according to the current volume of traffic at the crossing. It is often seen in today's automated traffic control systems that vehicles have to wait at a road crossing even though there is little or no traffic in the other direction. There are other problems as well, such as ambulances getting caught up by a red traffic signal and wasting valuable time. Congestion is often translated into lost time, missed opportunities, lost worker productivity, delivery delay, and a general increased cost.     

Toughness in synthetic and biological multilayered systems

Toughness in hard biological tissues is associated with fibrous or lamellar structures that deflect or stop growing cracks. In some cases, such as nacreous shell, protein interlayers absorb much of the crack energy. In other tissues, such as tooth enamel, the toughness derives from the mineral microstructure, and the small amount of residual protein apparently has little effect. There have been a number of efforts to make tough synthetic materials using layered structures. In this work, freeform fabrication has been used to make layered structures with a view to introducing similar toughness into brittle materials. Results are presented for epoxy-glass composites with glass fabric interlayers, porous alumina back-filled with aluminium metal, and layered glass-ceramic/silver materials.     

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

The conductivity of polymer gel electrolytes containing three aromatic and three aliphatic carboxylic acids has been studied, viz. (i) ortho-, meta- and para-hydroxybenzoic acids and (ii) oxalic, malonic and succinic acids. Polymeric gels were prepared by adding different wt% of polymer poly(methylmethacrylate) (PMMA) in solutions of respective acids in high dielectric constant organic solvent mixtures of propylene carbonate, ethylene carbonate and dimethylformamide. The highest conductivity in the first of the above group of acids is for o-hydroxy benzoic acid and oxalic acid in the second group of acids. Results have been explained on the basis of ortho and/or inductive effects which depend upon the relative positions of the substituted hydroxyl (–OH) and carboxyl (–COOH) group or that of the two carboxylic groups.     

Addressing spatiotemporal and computational heterogeneity in structured adaptive mesh refinement

Structured adaptive mesh refinement (SAMR) techniques can provide accurate and cost- effective solutions to realistic scientific and engineering simulations modeling complex physical phenomena. However, the adaptive nature and inherent space–time heterogeneity of SAMR applications result in significant runtime management challenges. Moreover, certain SAMR applications involving reactive flows exhibit pointwise varying workloads and cannot be addressed by traditional parallelization approaches, which assume homogeneous loads. This paper presents hierarchical partitioning, bin-packing based load balancing, and Dispatch structured partitioning strategies to manage the spatiotemporal and computational heterogeneity in SAMR applications. Experimental evaluation of these schemes using 3-D Richtmyer–Meshkov compressible turbulence and 2-D reactive-diffusion kernels demonstrates the improvement in overall performance.     

Determining link weight system under various objectives for OSPF networks using a Lagrangian relaxation-based approach

An important traffic engineering problem for OSPF networks is the determination of optimal link weights. Certainly, this depends on the traffic engineering objective. Regardless, often a variety of performance measures may be of interest to a network provider due to their impact on the network. In this paper, we consider different objectives and discuss how they impact the determination of the link weights and different performance measures. In particular, we propose a composite objective function; furthermore, we present a Lagrangian relaxation-based dual approach to determine the link weight system. We then consider different performance measures and discuss the effectiveness of different objectives through computational studies of a variety of network topologies. We find that our proposed composite objective function with Lagrangian relaxation-based dual approach is very effective in meeting different performance measures and is computationally very fast.     

3D head tracking under partial occlusion

A new algorithm for 3D head tracking under partial occlusion from 2D monocular image sequences is proposed. The extended superquadric (ESQ) is used to generate a geometric 3D face model in order to reduce the shape ambiguity during tracking. Optical flow is then regularized by this model to estimate the 3D rigid motion. To deal with occlusion, a new motion segmentation algorithm using motion residual error analysis is developed. The occluded areas are successfully detected and discarded as noise. Furthermore, accumulation error is heavily reduced by a new post-regularization process based on edge flow. This makes the algorithm more stable over long image sequences. The algorithm is applied to both synthetic occlusion sequence and real image sequences. Comparisons with the ground truth indicate that our method is effective and is not sensitive to occlusion during head tracking.     

Modelling of the disulphide-swapped isomer of human insulin-like growth factor-1: implications for receptor binding

Insulin-like growth factor-1 (IGF-1) is a serum protein whichunexpectedly folds to yield two stable tertiary structures withdifferent disulphide connectivities; native IGF-1 [18–61,6–48,47–52]and IGF-1 swap [18–61,6–47, 48–52]. Here we demonstratein detail the biological properties of recombinant human nativeIGF-1 and IGF-1 swap secreted from Saccharomyces cerevisiae.IGF-1 swap had a ~30 fold loss in affinity for the IGF-1 receptoroverexpressed on BHK cells compared with native IGF-1.The parallelincrease in dose required to induce negative cooperativity togetherwith the parallel loss in mitogenicity in NIH 3T3 cells impliesthat disruption of the IGF-1 receptor binding interaction ratherthan restriction of a post-binding conformational change isresponsible for the reduction in biological activity of IGF-1swap. Interestingly, the affinity of IGF-1 swap for the insulinreceptor was ~200 fold lower than that of native IGF-1 indicatingthat the binding surface complementary to the insulin receptor(or the ability to attain it) is disturbed to a greater extentthan that to the IGF-1 receptor. A 1.0 ns high-temperature moleculardynamics study of the local energy landscape of IGF-1 swap resultedin uncoiling of the first A-region -helix and a rearrangementin the relative orientation of the A- and B-regions. The modelof IGF-1 swap is structurally homologous to the NMR structureof insulin swap and CD spectra consistent with the model arepresented. However, in the model of IGF-1 swap the C-regionhas filled the space where the first A-region -helix has uncoiledand this may be hindering interaction of Val44 with the secondinsulin receptor binding pocket.     

Atomistic simulation of grain boundary sliding and migration

Interatomic potentials using Embedded Atom Method (EAM) are used in conjunction with molecular statics and dynamics calculations to study the sliding and migration of [1 1 0] symmetric tilt grain boundaries (STGB) in aluminum, under both applied displacement and force conditions. For equilibrium grain boundaries (without applied displacements and forces), three low energy configurations (corresponding to three twin structures) are found in the [1 1 0] STGB structures when grain boundary energies at 0 K are computed as a function of grain misorientation angle. Pure grain boundary sliding (GBS) without migration is simulated by applying external displacement. When forces are applied, the energy barriers are reduced consequent to the fact that grain boundary sliding of STGB is always coupled with migration. The propensity for pure GBS is evaluated by computing the energy associated with incremental equilibrium configurations during the sliding process and compared to the case when sliding is accompanied by migration. The magnitude of the energy barriers is found to be much higher in pure GBS than when migration accompanies sliding. Relations between the applied force, internal stress field, and displacement field are established and the role of grain boundary structure on the deformation process are examined. It is found that the GBS displacement is proportional to applied force, GB energy, and time.     

Regulation of periodontal ligament cell functions by interleukin-1beta

Periodontal ligament (PDL) cells maintain the attachment of the tooth to alveolar bone. These cells reside at a site in which they are challenged frequently by bacterial products and proinflammatory cytokines, such as interleukin-1beta (IL-1beta), during infections. In our initial studies we observed that IL-1beta down-regulates the osteoblast-like characteristics of PDL cells in vitro. Therefore, we examined the functional significance of the loss of the PDL cell's osteoblast-like characteristics during inflammation. In this report we show that, during inflammation, IL-1beta can modulate the phenotypic characteristics of PDL cells to a more functionally significant lipopolysaccharide (LPS)-responsive phenotype. In a healthy periodontium PDL cells exhibit an osteoblast-like phenotype and are unresponsive to gram-negative bacterial LPS. Treatment of PDL cells with IL-1beta inhibits the expression of their osteoblast-like characteristics, as assessed by the failure to express transforming growth factor beta1 (TGF-beta1) and proteins associated with mineralization, such as alkaline phosphatase and osteocalcin. As a consequence of this IL-1beta-induced phenotypic change, PDL cells become responsive to LPS and synthesize proinflammatory cytokines. The IL-1beta-induced phenotypic changes in PDL cells were transient, as removal of IL-1beta from PDL cell cultures resulted in reacquisition of their osteoblast-like characteristics and lack of LPS responsiveness. The IL-1beta-induced phenotypic changes occurred at concentrations that are frequently observed in tissue exudates during periodontal inflammation (0.05 to 5 ng/ml). The results suggest that, during inflammation in vivo, IL-1beta may modulate PDL cell functions, allowing PDL cells to participate directly in the disease process by assuming LPS responsiveness at the expense of their normal structural properties and functions.