Susceptibility of penicillin-susceptible and -resistant pneumococci to CFC-222, a new fluoroquinolone

Rotavirus (RV) strains infecting newborns often have unique neutralization antigens (P serotypes) on their outer capsids that are distinct from those found on RV strains that cause diarrhea in older children. We examined the hypothesis that unusual RV strains preferentially infect newborns because the newborns lack maternal neutralizing antibodies to these strains. To test this hypothesis, sera and saliva samples collected from neonates infected with 116E-like (P[11]G9) strains in the maternity ward of the All India Institute of Medical Sciences (AIIMS) hospital in New Delhi were tested for neutralizing antibodies against common RV strains and those infecting newborns and these titers were compared with those of newborns who did not become infected (controls). The infected neonates had significantly lower levels of cord blood neutralizing antibodies to 116E than the controls, suggesting that immunity to neonatal RV infection is acquired transplacentally through maternal antibodies. Further, this study confirmed the immunogenicity of the AIIMS neonatal strain 116E, a vaccine candidate, in its ability to evoke a potent RV-specific immunoglobulin A and neutralizing antibody response in serum and saliva among the infected babies. Our findings have important implications for the development of an effective RV vaccine. In India, where G9 strains are common in the community, the use of 116E as a vaccine, together with the rhesus tetravalent vaccine, may provide a broader protection against all the circulating RV serotypes, including serotype G9, which is not represented in the current rhesus RV tetravalent vaccine (G1-G4).     

All-trans beta-carotene is absorbed preferentially to 9-cis beta-carotene, but the latter accumulates in the tissues of domestic ferrets (Mustela putorius puro)

The algae Dunaliella bardawil and Dunaliella salina naturally contain large concentrations of all-trans and 9-cis beta-carotene (betaC). The purpose of this study was to compare the relative serum and tissue accumulation of all-trans and 9-cis betaC in ferrets fed different ratios of all-trans/9-cis betaC derived from two commercial sources, D. bardawil or D. salina (Betatene). Male ferrets (7 wk old) were fed carotene-free, pelleted diets for 27 d. Beginning on d 18, groups of ferrets (n = 6 or 7) received daily, one of six oral supplements varying in ratios of 9-cis and all-trans betaC mixed with approximately 1.0mL of Ensure. Four supplements containing 5.2-8.3 micromol total betaC were prepared from a 20% Betatene preparation, D. bardawil, a high-cis Betatene preparation, and Betatene further enriched in 9-cis betaC with all-trans betaC/9-cis betaC ratios of 2.2, 1.5, 0.6 and 0.4, respectively. Two control supplements, high and low betaC, were prepared from commercial betaC beadlets. The high control supplement had an all-trans/9-cis ratio of 19.0, whereas 9-cis betaC was not detected in the low supplement. On d 27, serum and tissues were obtained for HPLC analysis of betaC and its isomers. Analysis of livers showed that all-trans betaC was the primary isomer present, but 9-cis and other isomers were also detected in all groups. The hepatic all-trans/9-cis ratios were 5.9, 4.9, 2.5, 1.4, 52.2 and47.5, respectively, for the groups listed above. Lower amounts of all-trans and 9-cis betaC were found in kidneys compared with the liver, but ratios of all-trans/9-cis were not different among groups. Only trace amounts of 9-cis betaC were found in serum. These results demonstrate that the algae D. bardawil and D. salina provide a bioavailable source of betaC isomers, but, as in humans, absorption of 9-cis betaC is poor and any 9-cis betaC absorbed is apparently cleared by the liver.     

Optimal design of hybrid laminated composite plates with dynamic and static constraints

Optimization procedures are presented that consider the static and dynamic characteristic constraints for laminated composite plates and hybrid laminated composite plates subject to a concentrated load on the center of the plate. The design variables adopted are ply angle or ply thickness. Considered constraints are deflection, natural frequency and specific damping capacity. Using a recursive linear programming method, nonlinear optimization problems are solved, and by introducing the design scaling factor, the number of iterations is reduced significantly. Relating interactive optimization procedures with the finite element method analysis, various hybrid composite plates with arbitrary boundary conditions can be designed optimally. In the optimization procedure, verification of analysis and design of the laminated composite plates are compared with a previous paper. Various design results are presented on laminated composite plates and hybrid laminated composite plates.     

Analysis and design of aperture-coupled microstrip patch antennasand arrays fed by dielectric image line

This paper presents the analysis and design of aperture-coupled microstrip patch antennas and arrays fed by an dielectric image line. A theory based on the cavity model of the microstrip patch antenna and the change in the modal voltage of the image line at the aperture was developed to analyze the single element aperture-coupled microstrip patch antenna. The theory developed was combined with the array theory to design linear traveling wave arrays at X-band and Ka-band frequencies. The required taper in the excitations of the individual patches of the array was achieved by varying the aperture dimensions. Experiments show very good results for the antennas and the arrays     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

Adaptive fuzzy decentralized control for nonlinear large-scale systems based on high-gain observer

An adaptive fuzzy decentralized backstepping output-feedback control approach is proposed for a class of nonlinear large-scale systems with completely unknown functions,the interconnections mismatched in control inputs,and without the measurements of the states.Fuzzy logic systems are employed to approximate the unknown nonlinear functions,and an adaptive high-gain observer is developed to estimate the unmeasured states.Using the designed high-gain observer,and combining the fuzzy adaptive control theory with backstepping approach,an adaptive fuzzy decentralized backstepping output-feedback control scheme is developed.It is proved that the proposed control approach can guarantee that all the signals of the closed-loop system are semi-globally uniformly ultimately bounded(SUUB),and that the observer errors and the tracking errors converge to a small neighborhood of the origin by appropriate choice of the design parameters.Finally,a simulation example is provided to show the eectiveness of the proposed approach.     

IT投资风险预警的研究

进行IT投资风险预警的基础是对IT投资风险域进行分析;文章提出了基于IT投资目标、信息化生命周期以及企业架构的IT投资风险域的三维框架,并引入贝叶斯网络的原理建立预警机制。最后,在此基础上进行了IT投资风险预警的案例分析。     

Driving intention recognition and behaviour prediction based on a double-layer hidden Markov model

We propose a model structure with a double-layer hidden Markov model (HMM) to recognise driving intention and predict driving behaviour. The upper-layer multi-dimensional discrete HMM (MDHMM) in the double-layer HMM represents driving intention in a combined working case, constructed according to the driving behaviours in certain single working cases in the lower-layer multi-dimensional Gaussian HMM (MGHMM). The driving behaviours are recognised by manoeuvring the signals of the driver and vehicle state information, and the recognised results are sent to the upper-layer HMM to recognise driving intentions. Also, driving behaviours in the near future are predicted using the likelihood-maximum method. A real-time driving simulator test on the combined working cases showed that the double-layer HMM can recognise driving intention and predict driving behaviour accurately and efficiently. As a result, the model provides the basis for pre-warning and intervention of danger and improving comfort performance.     

Service-oriented smart home applications: composition, code generation, deployment, and execution

A smart home usually has a variety of devices or home appliance, instead of designing software for a specific home, this paper proposes a service-oriented framework with a set of ontology systems to support service and device publishing, discovery of devices and their services, composition of control software using existing control services that wrap devices, deployment, and execution of the composed service in an computing environment, monitoring the execution, and recovery from device failure. The ontology systems specify semantic information about devices, services, and workflows used in various smart home, and users can compose and recompose services for their specific needs. New devices, workflows, and services can be added into ontology. Most of the steps in this process can be automated including code generation. For example, service composition will be carried out in three steps: abstract workflow design, function construction, and device discovery, and different codes can be generated for different computing platforms such as Java and Open Services Gateway initiative environments. In this way, a variety of smart home can be constructed rapidly using the framework by discovery and composition using existing services and workflows. This paper illustrates this framework using a media control example to illustrate the ontology, discovery, composition, deployment, execution, monitoring, and recovery.