一种基于介质加载的地球覆盖波束天线设计

地球覆盖波束天线为低轨卫星与地面终端之间的数据传输建立了通道,文中研究了一种新型的介质 加载地球覆盖波束天线。基于介质加载的方法,文中提出了一种圆极化地球覆盖波束天线设计,该天线由馈电网 络、馈源和介质三部分组成,介质包括底部圆柱部分和顶部半球部分,馈源集成于介质内部。设计的地球覆盖波束 天线工作在C 波段,轴向0°~64°范围内增益在0 dBic 以上,40°方向增益为5. 2 dBic。天线尺寸紧凑,辐射波束具有 较好的空间截止特性,可满足立方星应用。     

3D FDTD Implementation for Scattering of Electric Anisotropic Dispersive Medium Using Recursive Convolution Method

The finite-difference time-domain method based on recursive convoltion method (RC-FDTD) for the electric anisotropic dispersive medium is discussed in detail. To exemplify the availability of the three-dimensional RC-FDTD algorithm, the backscattering Radar-Cross-Section(RCS) of a non-magnetized plasma sphere is computed, and the numerical results are the same as the one of the Shift Operater-FDTD method, and show that the RC-FDTD method is correct and efficient. In addition, the co-polarized and cross-polarized backscattering time-domain of a magnetized plasma sphere are obtained by the RC-FDTD algorithm. The results show that when the external magnetic field is implemented, the cross-polarized component appear, evidently.     

Noncooperative Differential Game Based Efficiency-aware Traffic Assignment for Multipath Routing in CRAHN

Comparing to the traditional multihop ad hoc networks, dynamic spectrum environment is the special characteristic of CRAHN (cognitive radio ad hoc networks). Therefore, the cognitive users will show their selfishness on spectrum bandwidth cost in multihop communication. In CRAHN, multipath routing is a reasonable choice when considering efficiency and stability. In order to take further advantage of efficiency of multipath routing, this paper study the efficiency-awareness traffic assignment problem of multipath routing in CRAHN. There are several existing game based traffic assignment schemes for selfish wireless network, however, all of them can not be directly applicable to CRAHN. In addition, none of the existing works studied whether the scheme is efficient. In this paper, a noncooperative differential game is proposed, and the equilibrium of the game is computed and proved to be an efficient traffic assignment for multipath routing in CRAHN. Besides this, we also optimize the total cost of game from the game designer’s point of view, and give a simple example to illustrate the optimization procedure.     

不同方向交替干扰方法对抗雷达旁瓣对消技术

由于现代雷达采用了旁瓣对消技术，使得传统方式的旁瓣干扰几乎完全失去效果。本文提出了一种针对旁瓣对消雷达的交替干扰方法，即在不同方向布置干扰机对同一部旁瓣对消雷达实施时间上的交替干扰。通过理论分析和模拟可知，其干扰功率甚至高于双方都不采用特殊技术时（即干扰方采用一般的旁瓣干扰，雷达方不采用旁瓣对消）的旁瓣干扰功率14dB以上。     

Scalable Gaussian Normal Basis Multipliers over GF(2<Superscript><Emphasis Type=Italic>m</Emphasis></Superscript>) Using Hankel Matrix-Vector Representation

This work presents a novel scalable multiplication algorithm for a type-t Gaussian normal basis (GNB) of GF(2^m). Utilizing the basic characteristics of MSD-first and LSD-first schemes with d-bit digit size, the GNB multiplication can be decomposed into n(n + 1) Hankel matrix-vector multiplications. where n = (mt + 1)/d. The proposed scalable architectures for computing GNB multiplication comprise of one d × d Hankel multiplier, four registers and one final reduction polynomial circuit. Using the relationship of the basis conversion from the GNB to the normal basis, we also present the modified scalable multiplier which requires only nk Hankel multiplications, where k = mt/2d if m is even or k = (mt − t + 2)/2d if m is odd. The developed scalable multipliers have the feature of scalability. It is shown that, as the selected digit size d ≥ 8, the proposed scalable architectures have significantly lower time-area complexity than existing digit-serial multipliers. Moreover, the proposed architectures have the features of regularity, modularity, and local interconnection ability. Accordingly, they are well suited for VLSI implementation.     

MIMO-OFDM系统中的一种空时频编码方案

基于MIMO-OFDM系统,本文提出了一种空时频编码方案,其利用扩展码,使数据符号在空域、时域、频域得到扩展,通过设置合适的参数,能够在频率选择性衰落信道下获得满空间分集和满频率分集,同时该方案的编解码复杂度不高。仿真结果表明,该方法在低信噪比下,也具有良好的误码率性能。     

基于LPC2368的操作系统设计

在嵌入式系统开发的过程中,有时由于系统规模小、资源少而无需嵌入操作系统,这给习惯在操作系统下编程的开发人员带来很大的不便,针对这种情况该文在LPC2368上设计了一个轻型操作系统,实现了轮询式的任务调度,解决了无操作系统环境下编程的困扰。     

Creep behavior of the ternary 95.5Sn-3.9Ag-0.6Cu solder—Part I: As-cast condition

The compression creep behavior was studied for the ternary solder alloy 95.5Sn-3.9Ag-0.6Cu in the as-cast condition. Samples were tested under stresses of 2–45 MPa and temperatures of −25–160°C. There was a significant variability in the creep curve shape, strain magnitude, and steady-state strain-rate properties. A multivariable linear-regression analysis of the steady-state strain-rate data, using the sinh-law stress representation, indicated two mechanisms distinguished by low- and high-temperature regimes of −25–75°C and 75–160°C, respectively. The sinh-law stress exponent (n) and apparent-activation energy (ΔH) in the −25–75°C regime were 4.4 ± 0.7 kJ/mol and 25 ± 7 kJ/mol (63% confidence intervals), respectively. Those same parameters in the 75–160°C regime were 5.2±0.8 kJ/mol and 95±14 kJ/mol, respectively, for the high-temperature regime. The values of ΔH suggested a short-circuit diffusion mechanism at low temperatures and a lattice or bulk-diffusion mechanism at high temperatures. The stress dependency of the steady-state strain rate did not indicate a strong power-law breakdown behavior or a threshold stress phenomenon. Cracks and grain-boundary sliding were not observed in any of the samples. As the creep temperature increased, a coarsened particle boundary and particle depletion zone formed in the region of fine Ag₃Sn particles that existed between the Sn-rich phase areas. The coarsened particle boundary, as well as accelerated coarsening of Ag₃Sn particles, were direct consequences of the creep deformation process.     

Amplifier linearization using compact microstrip resonant cell-theory and experiment

This paper presents a novel technique for reducing the intermodulation distortions (IMDs) in power amplifiers. In this method, both second- and third-harmonic components generated by the transistor are reflected back simultaneously by the compact microstrip resonant cell (CMRC) at the input port with proper phases to mix with the fundamental signal for the reduction of IMDs. A rigorous mathematical analysis on the effectiveness of multiharmonic reflections has been formulated and derived using the Volterra series. Moreover, the delay mismatch factor of the proposed method is analytically studied and the result shows that a better tolerance to the delay error can be achieved by using CMRC circuitry. Standard two-tone test measurements reveal 32- and 22-dB reductions for the third-order IMD and fifth-order IMD, respectively, without affecting the fundamental signal at 2.45 GHz. Meanwhile, the proposed approach gives a peak power added efficiency of 53% with 11.5 dB transducer gain and 15 dBm output power for a single-stage SiGe bipolar junction transistor. The adjacent channel power ratio (ACPR) is -55dBc for a data rate of 384-kb/s quadrature phase shift keyed modulated signal with 2-MHz spanning bandwidth, and this ACPR is maintained for a broad range of output power level.