工程机械油液监测体系的应用研究

通过对工程机械--平板硫化机组液压系统分析,建立了工程机械油液在线监测与诊断系统。该系统能对机组液压系统油液污染度和油温进行实时在线监测与故障诊断。     

H∞ mode-dependent fault detection filter design for stochastic Markovian jump systems with time-varying delays and parameter uncertainties

This paper deals with the problem of robust _H∞$H_{\infty }$ fault detection for a class of stochastic Markovian jump systems (SMJSs) The aim is to design a linear mode-dependent fault detection filter such that the fault detection system is not only stochastically asymptotically stable in the large, but also satisfies a prescribed _H∞-norm$H_{\infty }\mathrm{-}\mathrm{norm}$ level for all admissible uncertainties. By using Lyapunov stability theory and generalized Itô formula, some novel mode-dependent and delay-dependent sufficient conditions in terms of linear matrix inequality (LMI) are proposed to insure the existence of the desired fault detection filter. A simulation example and an industrial nonisothermal continuous stirred tank reactor (CSTR) system are employed to show the effectiveness of the proposed method.     

Mechanical and tribological properties of nanostructured TiN/TiBN multilayer films

Nanostructured multilayer films of TiN/TiBN with different bilayer thicknesses (Λ) were deposited onto Si(1 0 0) wafers (for mechanical analyses) and AISI M42 tool steels (for tribological measurements) at room temperature by reactive unbalanced magnetron sputtering in an Ar–N₂ gas mixture. The effects of different Λ values on mechanical and tribological properties were studied by atomic force microscope (AFM), scanning electron microscope (SEM), microindentation measurements, Rockwell-C tester, nano- and micro-scratch tester, impact tester, pin-on-disc tribometer, and Fourier-transform infrared spectroscopy (FTIR). It was found that the mechanical and tribological properties of multilayer films (typically 1.4 ± 0.1 μm in thickness) were closely related to Λ (varied from 1.4 to 9.7 nm). For the best multilayer film with Λ = 1.8 nm, a maximum hardness of 29.5 GPa was achieved and the best cohesive and adhesive strength was evidenced in terms of critical load values of L_C1 (37 N), L_C2 (>80 N) and the highest adhesion strength (HF1). Moreover, by the dynamic impact testing this multilayer film could endure impact cycles up to 4 × 10⁵ without adhesive failure. It was also found that the nano-scratch test under single-pass and constant-load conditions showed that the frictional coefficients decreased with Λ and increased with normal load due to the ploughing effect. The enhanced hardness in the multilayer films with small Λ values improved the wear resistance and lowered the frictional coefficients. The frictional coefficients obtained at 5 N were kept at 0.5 and increased from 0.52 to 0.65 when Λ increased from 1.8 to 9.7 nm at 2 N. By FTIR analyses, the multilayer films with Λ = 1.8 and 2.2 nm showed the presence of h-BN which provided a lubricating function resulted in lower frictional coefficients and wear rates. The tribological properties of the TiN/TiBN multilayer films with different Λ values are also explained in terms of mechanical properties and wear mechanisms.     

山西燕麦生产优势及产业化发展建议

通过对燕麦生产优势和市场潜力的探究,就山西省燕麦生产现状中存在的问题提出了具体的解决办法和促进燕麦产业化发展的战略措施.     

产品服务系统设计方法研究的总结和探讨

面向服务的设计和制造是当今制造业发展的重要趋势,制造企业围绕已有产品开发产品和服务:融合的整体解决方案即产品服务系统,已成为提升竞争力、满足顾客价值需求的重要策略。为探讨产品服务系统设计方法未来研究方向,从设计过程、需求建模、方案建模以及设计过程决策技术四个方面综述了现有设计方法在国内外研究的现状,探讨了顾客价值理论、方案信息建模、网络映射以及妥协评价等方法在产品服务系统设计中的应用,为产品服务系统设计方法的进一步研究奠定了基础。     

Three-dimensional image correction of tilted samples through coordinate transformation

In scanned probe measurements of micrometer- or nanometer-scale lines, it is nearly impossible to maintain the sample in a perfectly level position, and even a small amount of tilt can contribute to the accuracy of the result of the measure such as linewidth or step height. The current practice in image processing to deal with this problem is to conduct a line-by-line analysis to find the best fit of the substrate profile and subtract this background from all data points, thus describing 3D plane turns as a series of lines and processing them in succession in the x- or y-direction.In this paper a coordinate transformation method is proposed. The new coordinate system can be established on the basis of the inclined angle of the sample as well as the translation of three axes between the old coordinate system and the new coordinate system. The method can mathematically derive and hence correct all tilts around the x-, y- and z-axes and produce a leveled image simultaneously. Feature dimensions such as width, height, sidewall angle and pitch are calculated on the basis of simulated images using the coordinate transformation method and other methods. The result shows the advantage of the proposed method.     

Micro ECM with ultrasonic vibrations using a semi-cylindrical tool

In recent years, there has been a growing demand for micro holes. However, electrochemical machining has rarely been employed in drilling these holes because of problems with electrolyte diffusion. In this research, a semi-cylindrical tool was used as a tool electrode to increase the flow space of the electrolyte, and electrolyte diffusion was improved via the application of ultrasonic vibrations. Micro holes with a specified diameter of 76 μm were drilled on a 304 stainless steel plate of 300μm thickness. The proposed technique reduced both the machining time and the machining gap.     

机械同步在试验机附具中的应用

介绍了机械同步技术在电子式万能试验机附具中的应用,通过对试验结果和试验曲线的分析对比,进而得出相应的结论.     

Probing non-dipole allowed excitations in highly correlated materials with nanoscale resolution

Here, we demonstrate that non-dipole allowed d–d excitations in NiO can be measured by electron energy loss spectroscopy (EELS) in transmission electron microscopes (TEM). Strong excitations from ³A_2g ground states to ³T_1g excited states are measured at 1.7 and 3 eV when transferred momentum are beyond 1.5 Å⁻¹. We show that these d–d excitations can be collected with a nanometrical resolution in a dedicated scanning transmission electron microscope (STEM) by setting a good compromise between the convergence angle of the electron probe and the collected transferred momentum. This work opens new possibilities for the study of strongly correlated materials on a nanoscale.     

Characterization of Grain Boundaries in Superplastically Deformed Y-TZP Ceramics

The effects of compressive deformation on the grain boundary characteristics of fine-grained Y-TZP have been investigated using surface spectroscopy, impedance analysis, and transmission electron microscopy. After sintering at low temperature (1150°C), the grain boundaries are covered by an ultrathin (1nm) yttrium-rich amorphous film. After deformation at 1200°–1300°C under low stress, some grain boundaries are no longer covered by the amorphous film. Yttrium segregation seems to occur only at wetted grain boundaries. Evidence has been found that the extent of dewetting increases with increasing applied stress.