InGaAs-Capped InAs–GaAs Quantum-Dot Infrared Photodetectors Operating in the Long-Wavelength Infrared Range

A ten-period InAs-GaAs quantum-dot infrared photodetector (QDIP) with 8-nm In_0.15Ga_0.85 As capping layer grown after quantum-dot (QD) deposition is investigated. With reduced InAs QD coverage down to 2.0 mono-layers, responses at 10.4 and 8.4 mum are observed for the device under positive and negative biases, respectively. The phenomenon is attributed to the large Stark effect resulted from the asymmetric band diagrams of the device under different voltage polarities. The demonstration of long-wavelength infrared detections with the simple structures of the InGaAs-capped QDIP is advantageous for the development of multicolor QDIP focal-plane arrays.     

Fabrication of High-Curie-Point Barium-Lead Titanate PTCR Ceramics

High-Curie-point semiconducting barium-lead titanate positive temperature coefficient of resistivity (PTCR) ceramics of composition Ba_0.897Pb_0.1La_0.003TiO₃ and Ba_0.5Pb_0.5La_0.003TiO₃ were prepared. The starting powders were synthesized by reacting commercial BaTiO₃, PbO, and TiO₂. To avoid the nonstoichiometry due to the volatilization of Pb during the sintering process, a lead atmosphere sintering approach with PbTiO₃ as packing powder was used. The samples being fabricated by this method show a PTCR effect of 3 to 4.5 orders of magnitude above the Curie point. The curie points were about 180°C for Ba_0.897Pb_0.1La_0.003TiO₃ and about 360°C for Ba_0.497Pb_0.5La_0.003TiO₃.     

Evaluation of transglutaminase on the quality of low-salt chicken meat-balls

The purpose of this study was to examine the effect of different concentrations of crude pig plasma transglutaminase (TGase) at 0, 0.05, 0.1, 0.2, 0.4 and 1.0% on the quality of low-salt chicken meat-balls. Yield, color, gel strength, microstructure and sensory evaluation were measured. The results showed that both the yield and gel strength of the meat-balls increased as TGase supplement increased (P<0.05) without any obvious effect on color. Scanning electron microscopy (SEM) indicated firmer and more regular gel structures with increasing TGase addition. Texture, juiciness and overall acceptability as judged by sensory evaluation were not statistically affected until the level of TGase reached 1.0% (P<0.05).     

Identification of the combustion behaviour of lignite char between 350 and 900 °C

The combustion behaviour of four different lignite samples pyrolysed at 800 and 1000 °C has been studied. The reaction order and the activation energy of the char combustion reaction can be easily determined from the time to reach 50% conversion. Under 550 °C the reaction order of lignite samples are 0.7 and the activation energies are 27.4–27.9 kcal gmole^?1. Above 550 °C the measurement of the intrinsic reaction rate is limited by the film diffusion resistance. The pyrolysis temperature affects the reactivity significantly. The reactivity of char pyrolysed at 800 °C is 3.5 times that of char pyrolysed at 1000 °C.     

Influence of polymer molecular weight on selected thermodynamic properties of polymer/solvent systems and the application of the UNIFAC theory

The intrinsic viscosities of eleven narrow molecular weight distribution polystyrene samples ranging from number-average molecular weight 1820 to 1 292 000 have been determined in pure solvents of tetrahydrofuran and chloroform with a Ubbelohde No. 1 viscometer at 25°C. By combining the original and modified Fox-Flory viscosity treatments, respectively, with the Flory-Huggins Lattice theory, the interaction parameters were calculated. With the aid of original and modified UNIFAC methods the solvent activity, clustering function of the solvent, and the interaction parameter were computed and compared with the experimental data. It was established that the influence imposed by the polymer molecular weight on the activity of the solvent, the clustering function of solvent, and interaction parameter is insignificant. The modified UNIFAC method satisfactorily predicted the solvent activity as illustrated by previous investigators. However, both UNIFAC methods failed to predict the interaction parameter.     

Predicting shrinkage and warpage of fiber-reinforced composite parts

One major problem that arises in the design of plastic parts, especially those that are fiber reinforced, is the change of shape and dimension as a result of shrinkage and warpage. These material inhomogeneities are caused by flowinduced fiber orientation, curing, poor thermal mold lay-out, and other processing conditions. This paper presents a simulation that predicts shirnkage and warpage of 3-D compression molded fiber reinforced composite parts. The simulation represents the structure with the 3-noded shell elements used in mold filling simulations. The calculated results indicate that fiber orientation strongly affect the final properties, which vary with different chage locations, have a significant effect on warpage. Unsymmetric curing, caused by uneven mold temperatures, could lead to a thermal moment that could possibly help reduce warpage.     

Modelling complex manufacturing systems using discrete event simulation

This paper presents an approach in simulating complex manufacturing systems. The approach is founded on developing several general purpose simulation generators for an assembly station, a manufacturing cell, and an inventory transfer function. These simulation generators can then be linked together to create a model of a complex manufacturing system. A typical manufacturing system is modelled using these simulation generators and the results summarized.     

Resistance projection welding for TO-Can style package

The effects of the process parameters on the joint quality of TO-Can using resistance projection welding were investigated.A capacitor discharge stored energy welding machine was used for joining caps and headers both coated with nickel SPCC steel.The electrode materials used in this study were brass and W-Cu alloy.Experimen-tal results indicated that the peak current of the W-Cu electrode was higher than that of the brass electrode,irrespective of the operating pressure variation.Increased operating pressu...     

Microstructure and Densification of Pressureless-Sintered Al2O3/Si3N4-Whisker Composites

Composite densification was studied by performing slip casting and sintering experiments on an Al₂O₃ matrix and Si₃N₄ whisker system. Even though all the slip-cast powder compacts exhibited high green densities (up to 70% of the theoretical) and narrow pore-size distribution (pore radius around 15 to 30 nm), significant differential densification on a microscopic scale was found due to the existence of local whisker agglomeration. The inhomogeneous whisker distribution resulted in a binary mixture of large and small pores in the sintered composites, in which whisker-associated flaws remained stable even after prolonged sintering. The sintered microstructures showed that the spatial distribution as well as the volume fraction of the Si₃N₄ affect composite densification. Inhomogeneous whisker distribution dominated the complete densification of the composites.     

Study of SO2 adsorption and thermal regeneration over activated carbon-supported copper oxide catalysts

The mechanisms of SO₂ adsorption and regeneration over activated carbon-supported copper oxide sorbent/catalysts were analyzed. Studies were carried out in a fixed-bed reactor equipped with a non-dispersive infrared gas analyzer to detect the reaction products and by using X-ray powder diffraction (XRPD) and temperature-programmed desorption (TPD) experiments to characterize the nature of the sulfate species and surface oxygen complexes. The results indicate that SO₂ was catalytically oxidized to SO₃ over a copper phase in the presence of gaseous oxygen, and then reacted with a copper site to form a sulfate linked to copper without desorption into the gas phase. The activated carbon support did not participate in this sulfation reaction. After the adsorption of SO₂, the exhausted sorbent/catalysts could be regenerated by direct heat treatment in inert gas at temperatures between 260 and 480 °C, while the neighboring surface oxygen complexes on the carbon surface were acting as the reducing agents to reduce CuSO₄ to Cu. During the subsequent adsorption process, the copper is rapidly oxidized by oxygen in the flue gas.