Selective and nonselective wet etching of Zn0.9Mg0.1O/ZnO

Wet etch rates at 25°C for Zn_0.9Mg_0.1O grown on sapphire substrates by pulsed laser deposition (PLD) were in the range 300–1100 nm · min⁻¹ with HCl/H₂O (5×10⁻³−2×10⁻² M) and 120–300 nm · min⁻¹ with H₃PO₄/H₂O (5×10⁻³−2×10⁻² M). Both of these dilute mixtures exhibited diffusion-limited etching, with thermal activation energies of 2–3 kCal · mol⁻¹. By sharp contrast, the etch rates for ZnO also grown on sapphire by PLD were much slower in similar solutions, with rates of 1.2–50 nm · min⁻¹ in HCl/H₂O (0.01–1.2 M) and 12–54 nm · min⁻¹ in H₃PO₄/H₂O (0.02–0.15 M). The etching was reaction limited over the temperature range 25–75°C, with activation energies close to 6 kCal · mol⁻¹. The resulting selectivity of Zn_0.9Mg_0.1O over ZnO can be a high as ∼400 with HCl and ∼30 with H₃PO₄.     

关于天津市发展"生物质能源与化工"的一点思考

国家可持续发展的核心动力是科技进步和人才培养。作为一个特大型城市,天津要实现重点领域乃至全面跨越式发展,只有靠核心竞争力,特别是企业的核心竞争力提升。而企业的竞争力取决于企业的自主创新能力,这要靠厂、学、研、管、商之     

High energy Urbach characteristic observed for gallium nitride amorphous surface oxide

We have observed an “above band-gap” Urbach like characteristic for gallium nitride films (at the high energy side of the band-edge). A combination of X-ray diffraction, secondary ion mass spectroscopy and optical transmission measurements were taken for gallium nitride samples of different thickness. From this data we demonstrate that the high energy Urbach like characteristic is related to the presence of an amorphous surface oxide. It is shown to dominate the absorption spectra of thin gallium nitride samples, for which the influence of surface oxidation is strongest.     

Development of a low cost microwave mixer using a broad-band substrate integrated waveguide (SIW) coupler

A low cost single-balanced mixer is designed using a newly designed 90/spl deg/ substrate integrated waveguide (SIW) 3-dB coupler, which takes the advantages of low cost, low profile, and high performance. An X-band single-balanced SIW mixer is designed and fabricated with a standard printed circuit board process. Measured conversion loss of 6.8dB and the wide-band response from 8.5 to 12GHz are presented.     

Studies on the corrosion behavior of cerium-implanted zircaloy-4 with GAXRD

In order to study the influence of cerium ion implantation on the aqueous corrosion behavior of zircaloy-4, specimens were implanted by cerium ions with a fluence range from 1×10¹⁶ to 1×10¹⁷ ions/cm² at maximum 150°C, using MEVVA source at an extracted voltage of 40 kV. The valence and elements penetration distribution of the surface layer were analyzed by X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES) respectively. Glancing angle X-ray diffraction (GAXRD) was employed to examine the phase transformation due to the cerium ion implantation in the oxide films. Three-sweep potentiodynamic polarization measurement was employed to value the aqueous corrosion resistance of zircaloy-4 in a 1 N H₂SO₄ solution. It was found that a significant improvement in the aqueous corrosion behavior of zircaloy-4 implanted with cerium ions compared with that of the as-received zircaloy-4. The improvement effect will declined with raising the implantation fluence. The bigger is the fluence, the less is the improvement. Finally, the mechanism of the corrosion behavior of the cerium-implanted zircaloy-4 is discussed.     

高层印制线路板正面临的对位挑战

封装工业正在推动着印制线路板技术水平朝着半导体要求的方向发展。高密度印制线路板正广泛用于网络路由器、自动测试设备和服务器领域。高密度要求(>150 IO/cm~2)正成为客户的普通需求。为满足现有的高密度封装要求,由于线宽、线距和通孔孔径正接近传统制作极限,普遍的方法就是不断增加印制线路板的层数。这些特征正驱动着印制线路板在基材、图像转移、蚀刻、电镀、阻焊、测试流程和对位系统的变化。此文主要讲述了印制线路板特性的变化趋势和利用对位模式和雷利分布去预测满足高级对位要求的能力以及印制线路板各流程中有关对准度的控制要点。     

丙烯酸高碳醇酯的合成

介绍了降凝剂中间体丙烯酸高碳醇酯的合成和产品分离提纯方法。考察了合成条件对酯化反应的影响，结果表明，在原料丙烯酸与十八醇摩尔比1．2：1，阻聚剂对苯二酚用量占原料总量1．5％，催化剂对甲苯磺酸用量占原料总量1．5％，反应温度80-86℃，回流反应时间6h条件下，酯化率最高达89％。产品分离提纯方法与传统分离方法比较，所需分离时间短，洗涤用水量少，而产品收率远高于传统分离方法，达95％以上。     

海底天然气渗漏地震探测方法的研究进展

海底天然气渗漏可以指示沉积层中的烃类聚集带，渗漏出的大量气体（主要是甲烷）还可能影响全球的气候变化。此外，与海底渗漏相关的浅层气改变了海底沉积物的土工性质，可能对海底工程构成威胁。因此对海底天然气渗漏进行研究意义重大。在海底渗漏探测方面，地震是一种有效的方法，它不仅能反映深部构造，为海底渗漏提供气体来源和运移通道信息；而且还可以直接用来寻找渗漏相关特征，为海底观测和取样提供依据。在地震剖面上，与海底天然气渗漏相关的浅层气表现为声混浊、声空白、亮点、多次波、速度下拉、气烟囱等特征，泥火山、泥底辟表现为隆起的地震透明带，而麻坑则表现为“V”字形截面和半透明状地震混浊。     

Mathematical analysis of viscometric (polymer) flow fields in capillaries: Taylor dispersion revisited

A general formulation for capillary flow of two miscible fluids – one a dilute plug of polymer fluid inserted into a fully developed Poiseuille flow of the other, a Newtonian stream – is examined for its long time behavior. Phenomenologically, the system evolves from an initial state, that of a plug within the boundaries of sharp, well defined fronts inside a Newtonian stream, to a more homogenized state in the very long time scale. This problem was addressed by G.I. Taylor but with regard to a system of two Newtonian fluids, leading to the well-known results commonly described as `Taylor axial dispersion'. In this paper, a general and systematic perturbation analysis is presented from which Taylor's result is recovered as a special case of a more general solution which applies to fluids incorporating elastic properties. In particular, the influence of viscoelasticity and (polymer) diffusivity on the observed pressure profile in the capillary conduit is examined. This effect is clearly separated out for small Peclet number flows using asymptotic and numerical analysis. The results identify the influence of fluid viscosity, elasticity, and diffusivity on the observed pressure profile and form the basis for the improved characterization of polymeric elasticity using capillaries – a finding that is of significant scientific and commercial interest. These results were obtained by the authors as a class of observations resulting from the perturbation analysis of forced-flow capillary devices in viscoelastic fluid property investigation.