Synthesis and Characterizations of Triphenylamine End-Functionalized Polymers via Reversible Addition-Fragmentation Chain Transfer Polymerization

A novel reversible addition-fragmentation chain transfer (RAFT) reagent bearing triphenylamine (TPA) group, 4-diphenylamino-dithiobenzoic acid benzyl ester (DDABE), was designed and synthesized. It was used in the RAFT polymerizations of styrene (St) and methyl acrylate (MA) to prepare end-functionalized polymers. The results of the polymerization showed that the RAFT polymerizations could be well controlled using DDABE as the RAFT agent. Number-average molecular weight (M_n,GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow (PDI< 1.50). The results of chain-extension reaction, ¹H NMR spectra and UV/Vis spectra confirmed that most of the polymers chains were end-capped by the functional triphenylamine (TPA) groups. The effect of feed molar ratios of St/DDABE/AIBN on polymerization was investigated.     

Preparation and Compressive Stress Effect of Polymer Matrix RE-Fe Giant Magnetostrictive Composite

Polymer matrix RE-Fe giant magnetostrictire composite （GMPC） was prepared using bonding and magnetic field forming technique, and magnetostriction of samples was measured for different compressive stress. The experimental results show thai there is certain compressive effect in GMPC. And the influence of compressive stress on magnetostriction of sample was investigated. It offers essential reference for application and device design of GMPC.     

中央空调系统制冷主机房建设中的几项节能措施

中央空调系统由制冷主机房、水子系统、风子系统以及楼宇自控（BA）等部分组成。制冷主机房是中央空调系统的心脏部分，它是由若干台制冷主机，一次冷冻水子系统，二次冷冻水子系统、冷却水子系统、冷却塔、控制柜等组成。它的运行状况直接关系到中央空调系统的能耗，本文将叙述新锦江大酒店制冷主机房建设中的几点节能措施。     

桉木硫酸盐浆不同漂白技术的评价

高白度漂白商品浆的白度已从通常的88%～90%提高到更高的水平,达到92%.这种高白度的要求导致了纸厂使用高价格光学漂白剂,以及过量使用这种添加剂的环境风险.     

Effect of Thickness of the p-AlGaN Electron Blocking Layer on the Improvement of ESD Characteristics in GaN-Based LEDs

The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same.     

烧结成品运输自动控制系统的改进

对烧结成品运输自控系统不稳定性因素进行了分析，提出了采取优化硬件外围工作环境，完善软件保护程序等改进措施。改进后的自控系统稳定性明显提高。     

Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion

Aluminum has been deformed by equal channel angular extrusion (ECAE) to obtain submicron-grained structures under different deformation routes. The deformation routes were varied by rotating billets through 0, 90, and 180 deg between each extrusion pass, and were designated as route A, B_C, and C, respectively. Based on quantitative microstructural analysis, the effectiveness of the deformation route is shown to depend upon the different definition used. The order of effectiveness is (a) A > B_C > C for both 90 and 120 deg dies, in terms of the generation of high-angle grain boundaries (HAGBs); (b) B_C > C > A for both 90 and 120 deg dies, in terms of the formation of equiaxed shape of grains; and (c) B_C > A > C for 90 deg die and B_C ∼ A > C for 120 die, in terms of reducing grain size. It is suggested that the generation of HAGBs can be related to the accumulation of nonredundant strain, while the shape and orientation of grains may be linked to the shearing patterns of the deformation route.     

Web服务在信用信息工程中的应用

目前的社会信用信息工程中,许多的政府部门都建立了自己的信用信息数据库,但在政府各级部门数据库之间进行数据交流和共享存在着许多的问题,在许多地方,数据共享还是一片空白。Web服务技术是应用程序通过内联网或者因特网发布和利用软件服务的一种标准机制。利用WEB服务可以方便地实现不同系统之间的数据交换和集成。该文提出利用web服务技术来解决信用信息工程中的信息数据共享问题。并在此基础上提出利用WEB服务工作流技术将信用评估整合到电子商务过程,以实现可信用电子商务     

Bench-Scale Testing of Nanofiltration for Seawater Desalination

A dual-staged nanofiltration process is being evaluated as an alternative to reverse osmosis for seawater desalination. The primary goal of this system is to reduce energy consumption while producing potable water at an acceptable recovery rate. Investigation of this system at the bench-scale level focused on membrane surface characterization, ion rejection (including boron, bromide, and iodide rejection), and flux decline. Results from this study showed that two commercially available nanofiltration membranes can effectively desalinate seawater. Although fouling was apparent—and resulted in approximately 20% flux decline over 3 days—a critical flux was not identifiable. Operation of the system at different cross-flow velocities revealed the significance of hydrodynamic conditions on the polarization modulus, and hence on membrane performance.