Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Consolidation of sand formation using freon'll gas hydrate

Freon 11 gas hydrate was used to block the pores of four size ranges of sand from 24 mesh to 60 mesh. A 50.8 mm deep bed of sand when thus “frozen” with hydrate could sustain a dfferential water pressure of at least 6895 kPa. A subcooling of about 5 to 6°C below its thermodynamic formation temperature was required to cause the hydrate to form such a plug. Once formed, the hydrate remained stable at temperatures up to its decomposition temperature. The time required for the hydrate crystal to grow to a size large enough to block the pores of the bed was about two hours. The amount of hydrate forming agent required to block the sand pores was found to be approximately that calculated from the ideal composition of the hydrate.     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

State space approximation for general fractional order dynamic systems

Approximations for general fractional order dynamic systems are of much theoretical and practical interest. In this paper, a new approximate method for fractional order integrator is proposed. The poles of the approximate model are unrelated to the order of integrator. This feature shows benefits on extending the algorithm to the systems containing various fractional orders. Then a unified approximate method is derived for general fractional order linear or nonlinear dynamic systems via combining the proposed new method with the distributed frequency model approach. Numerical examples are given to show the wide applicability of our method and to illustrate the acceptable accuracy for approximations as well.     

A New Indole Synthesis Promoted by Metal Triflates

A new synthesis of 4- and 7-carbon-substituted indoles is described. The overall sequence involves the addition of a nitrile oxide to 1 carboethoxy-2-(or 3-) allylpyrrole, hydrogenation of the intermediate isoxazoline to β-hydroxy ketone and cyclization of the ketol using magnesium or zinc triflate to the substituted indole. This new indole-forming strategy can also accommodate the introduction of oxygen functionality into the indole 6-position. Possible mechanistic aspects of the reaction are detailed.     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Phase Assemblages of Pr α-sialon Derived from SHS-ed Powders and TEM Study on the Nucleation of Pr α-sialon

The Pr α-sialon powders prepared by self-propagating high-temperature synthesis (SHS), consisting of 55 wt% Pr α-sialon and 45 wt% of β-sialon (abbreviated as α' and β'), were hot-pressed at 1800°C for 1 h. The results showed that Pr α' phase would transfer to β' with the appearance of JEM phase (Pr(Si_{6− z} Al _z )(N_{10− z} O _z )) after sintering, thus resulting in the increase of β' phase to 86 wt%. The addition of Y₂O₃ into SHS-ed Pr α' powders as the starting materials restrains the transformation of α' to β' and prevents the formation of JEM phase as well. The nucleation mechanism of Pr α' grain during hot-pressing was investigated in terms of transmission electron microscope and energy-dispersive spectrometer analysis. Two nucleation modes of Pr α' grains were found, i.e., nucleating on the undissolved Pr α' grains and on the nuclei of (Pr, Y) α' grains precipitated from liquid phase.     

射流流化床内流体力学行为的模拟研究

以流化床应用为代表的气固流动系统是许多化工过程中的重要组成部分 ,CFD( computational fluid dynamics)方法能够为其优化设计和放大提供所需要的信息 .本文采用双欧拉模型 ,与 Gidaspow等的实验结果进行了对比 ,模拟了二维射流流化床内气泡的形成规律 ,得到了带锥型分布器的流化床内瞬时空隙率和气固相速度分布等流体力学参数 .对锥型分布器流化床的实验结果表明 ,模拟得到的气泡的形状与实验现象相接近 .     

Measuring virtual experience in a three-dimensional virtual reality interactive simulator environment: a structural equation modeling approach

With the rapid development of the VR market, virtual experience has increasingly been the object of study in recent years. A growing number of studies have reported the positive effect that virtual experience can have on a user’s mood and loyalty. However, few studies have investigated the influence of the mechanism of virtual experience on users’ mood and loyalty. To compensate for this research gap, this study aims to evaluate consumers’ virtual experience by examining the flow state in a virtual environment. A total of 368 valid questionnaires were collected, and a structural equation modeling approach was employed in the data analysis. The study reveals that forming flow involves many factors: the intrinsic characteristics of the mediated environment, the consumer’s assumptions and perceptions prior to entering the flow state, the stage at which the customer enters the flow state, and the consequences of the flow experience.     

Coverage enhancement by using the mobility of mobile sensor nodes

Coverage is a fundamental problem in sensor networks. Sensor coverage, which reflects how well a sensor network is monitored by sensors, is an important measure for the quality of service (QoS) that a sensor network can provide. In mobile sensor networks, the mobility of sensor nodes can be utilized to enhance the coverage of the network. Since the movement of sensor nodes will consume much energy, this mobility of sensor nodes should be properly managed by some pre-defined schemes or protocols. By noticing this issue, some existing works have proposed several movement-assisted sensor deployment schemes. These works assume that the target field is a 2-dimensional space. In this paper, we study a generalized case of this problem whereby the target field can be a space which ranges from 1-dimensional to 3-dimensional. Two variations of the movement-assisted sensor deployment problem with different optimization objectives were formulated. We identify a set of basic attributes which can be used as guidelines for designing movement-assisted sensor deployment schemes. Based on these attributes, we propose efficient algorithms for both variants of the movement-assisted sensor deployment problem.