Adaptive multistage parallel interference cancellation for CDMA

Although the multistage interference cancellation detector is simple in structure, its performance degrades when the number of active users becomes large. In some cases, the performance is even worse than that without cancellation, due to the lack of the exact knowledge of the interfering signal in cancellation. Partial interference cancellation suggested by Divsalar and Simon (see IEEE Trans. Commun., vol.46, p.258-68, 1998) tries to remedy this weakness by reducing the cost of a wrong interference estimation through a weight in each stage. This paper presents an adaptive multistage structure based on the partial interference cancellation approach. In this structure, the weights are obtained by minimizing the mean-square error between the received signal and its estimate through a least mean square (LMS) algorithm. The resulting weights contain reliability information for the hard decisions made in the previous stage. Neither a training sequence nor a pilot signal is needed in the proposed scheme, and its complexity is much lower than that of linear multiuser detectors. Simulation results show that the proposed scheme can outperform some of the existing interference cancellation methods in both the additive white Gaussian noise (AWGN) and the multipath fading channels     

Orthorhombic Ti2O3: A Polymorph‐Dependent Narrow‐Bandgap Ferromagnetic Oxide

Magnetic semiconductors are highly sought in spintronics, which allow not only the control of charge carriers like in traditional electronics, but also the control of spin states. However, almost all known magnetic semiconductors are featured with bandgaps larger than 1 eV, which limits their applications in long‐wavelength regimes. In this work, the discovery of orthorhombic‐structured Ti₂O₃ films is reported as a unique narrow‐bandgap (≈0.1 eV) ferromagnetic oxide semiconductor. In contrast, the well‐known corundum‐structured Ti₂O₃ polymorph has an antiferromagnetic ground state. This comprehensive study on epitaxial Ti₂O₃ thin films reveals strong correlations between structure, electrical, and magnetic properties. The new orthorhombic Ti₂O₃ polymorph is found to be n‐type with a very high electron concentration, while the bulk‐type trigonal‐structured Ti₂O₃ is p‐type. More interestingly, in contrast to the antiferromagnetic ground state of trigonal bulk Ti₂O₃, unexpected ferromagnetism with a transition temperature well above room temperature is observed in the orthorhombic Ti₂O₃, which is confirmed by X‐ray magnetic circular dichroism measurements. Using first‐principles calculations, the ferromagnetism is attributed to a particular type of oxygen vacancies in the orthorhombic Ti₂O₃. The room‐temperature ferromagnetism observed in orthorhombic‐structured Ti₂O₃, demonstrates a new route toward controlling magnetism in epitaxial oxide films through selective stabilization of polymorph phases.     

合肥近地面折射率结构常数C_n~2分布特征及分析

本文通过对合肥郊区中科院安光所气象观测场1995年1～3月近地面层折射率结构常数C2n的统计分析，得到了C2n的日变化特征、概率分布等，同时对C2n和近地面气象要素的关系作了讨论。     

用火花电阻计算高压毫微秒脉冲放电参量

本文用火花电阻公式研究了高压毫微秒脉冲参量（脉冲幅值、前沿、宽度）与储能电容的关系。结果表明，用火花电阻等效亚纳秒脉冲放电管击穿后的状态是合适的。     

湍流两相流内弹道模型

采用双流体两相流模型,推导有粘的两相流内弹道基本方程,并且建立了两相相互作用的气固两相湍流数学模型。     

一种新型发射技术-冲压加速原理

介绍一种新型发射技术──冲压加速原理，它在仅仅利用化学能的条件下，可将弹丸加速到超过２ｋｍ／ｓ的非常规初速，加速效率很高，弹迫效率可高达３０％，是一种很有发展前途的超高速发射技术。     

Ultrabroadband and Reconfigurable Transmissive Acoustic Metascreen

Passive acoustic wave manipulations are severely constrained by the narrow frequency bandwidth of acoustic metastructures. In this research, an unprecedented type of reconfigurable acoustic metascreen is proposed for broadband manipulations of transmitted acoustic waves. The conceived structure is composed of uniquely designed unit cells producing the modulation of the transmitted phase shift within the full 2π range with an excellent impedance matching with the background medium. By rationally arranging the reconfigurable elements within the metascreen based on the corresponding parameter profile, different phenomena and functionalities can be easily realized. As examples, acoustic focusing and acoustic bending are presented to showcase the performance of the proposed metascreen. We indeed numerically and experimentally demonstrate the ultra-broadband and reconfigurable features of our concept over an astonishing frequency range extending from 3 to 17 kHz, which covers the majority spectrum of the audible range of human hearing. Our work provides a unique and remarkable conceptual design of acoustic metascreen opening a promising and pragmatic route to conceive compact broadband acoustic devices, where wavefront manipulations on broadband sound signals or pulsed signals are required.     

Planar array stack design aided by rapid prototyping in development of air-breathing PEMFC

The polymer electrolyte membrane fuel cell (PEMFC) is one of the most important research topics in the new and clean energy area. The middle or high power PEMFCs can be applied to the transportation or the distributed power system. But for the small power application, it is needed to match the power requirement of the product generally. On the other hand, the direct methanol fuel cell (DMFC) is one of the most common type that researchers are interested in, but recently the miniature or the micro-PEMFCs attract more attention due to their advantages of high open circuit voltage and high power density.     

Preparation and properties of carbon nanotube/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells

This study aims at the fabrication of lightweight and high performance nanocomposite bipolar plates for the application in polymer electrode membrane fuel cells (PEMFCs). The thin nanocomposite bipolar plates (the thickness <1.2 mm) consisting of multiwalled carbon nanotubes (MWCNTs), graphite powder and PP were fabricated by means of compression molding. Three types of polypropylene (PP) with different crystallinities including high crystallinity PP (HC-PP), medium crystallinity PP (MC-PP), low crystallinity PP (LC-PP) were prepared to investigate the influence of crystallinity on the dispersion of MWCNTs in PP matrix. The optimum composition of original composite bipolar plates was determined at 80 wt.% graphite content and 20 wt.% PP content based on the measurements of electrical and mechanical properties with various graphite contents. Results also indicate that MWCNTs was dispersed better in LC-PP than other PP owing to enough dispersed regions in nanocomposite bipolar plates. This good MWCNT dispersion of LC-PP would cause better bulk electrical conductivity, mechanical properties and thermal stability of MWCNTs/PP nanocomposite bipolar plates. In the MWCNTs/LC-PP system, the bulk electrical conductivities with various MWCNT contents all exceed 100 S cm⁻¹. The flexural strength of the MWCNTs/LC-PP nanocomposite bipolar plate with 8 phr of MWCNTs was approximately 37% higher than that of the original nanocomposite bipolar plate and the unnotched Izod impact strength of MWCNTs/LC-PP nanocomposite bipolar plates was also increased from 68.32 J m⁻¹ (0 phr) to 81.40 J m⁻¹ (8 phr), increasing 19%. In addition, the coefficient of thermal expansion of MWCNTs/LC-PP nanocomposite bipolar plate was decreased from 32.91 μm m⁻¹ °C⁻¹ (0 phr) to 25.79 μm m⁻¹ °C⁻¹ (8 phr) with the increasing of MWCNT content. The polarization curve of MWCNTs/LC-PP nanocomposite bipolar plate compared with graphite bipolar plate was also evaluated. These results confirm that the addition of MWCNTs in LC-PP leads to a significant improvement on the cell performance of the nanocomposite bipolar plate.