基于计量信息模型的电力计量自动化PI点维护方法

佛山供电局海量实时数据采用PI数据库进行存储,目前已经有270多万PI点,是全球首家超过200万点的厂家。目前对PI点的管理缺乏确实有效的方法,本文提出了一种基于业务模型的PI点自动维护方法,从模型同步、PI点创建、完整性检测、PI点清理四个方面实现PI点的自动维护,有效的保证了PI点的准确性、实时性和同业务模型的一致性。     

Low-Temperature Sintering of Ba0.5Sr0.5TiO3-SrMoO4 Dielectric Tunable Composite Ceramics for LTCC Applications

A sintering-aid system using melting of B-Li glass for barium strontium titanate (BST)-based compositions to be used in low-temperature cofired ceramic (LTCC) layers is introduced. The effects of the sintering aid on the microstructure, dielectric properties, and application in LTCC were investigated. The composition Ba_0.5Sr_0.5TiO₃-SrMoO₄ with 3 wt.% B-Li glass sintered at 950°C exhibits optimized dielectric properties, including low dielectric constant (368), low dielectric loss (0.007), and moderate tunability (13%, 60 kV/cm) at 10 kHz. At 1.44 GHz, it possesses a dielectric constant of 218 and Q value of 230. LTCC multilayer ceramic capacitors fabricated by the tape-casting process have steady relative tunability of 12% at 300 V, suggesting that BST50-SrMoO₄-B-Li glass composite ceramic is a promising candidate for electrically tunable LTCC microwave device applications.     

Comparison of Microwave Dielectric Properties of Ba0.6Sr0.4TiO3 Thin Films Grown on (100) LaAlO3 and (100) MgO Single-Crystal Substrates

The microwave properties of barium strontium titanate (Ba_0.6Sr_0.4TiO₃) thin films grown on (100) LaAlO₃ (LAO) and (100) MgO single-crystal substrates through the sol–gel technique were investigated. The interdigital capacitor (IDC) technique was used to measure the nonlinear dielectric properties in the frequency range from 1 GHz to 10 GHz. The results show that the Curie temperature, capacitance, and tunability of the films are strongly dependent upon the substrate. The film fabricated on the LaAlO₃ substrate has a higher tunability of 16.77% than that grown on the MgO substrate (～8.38%), measured at 10 GHz with an applied voltage of 35 V. The loss tangent is a linear function of the frequency in the microwave range, and the film grown on the MgO substrate has a lower loss tangent than that grown on the LAO substrate. This work reveals the great potential of Ba_0.6Sr_0.4TiO₃ (BST) films for application in tunable microwave devices.     

Distributed Flow Control and Medium Access in Multihop Ad Hoc Networks

Recent studies have shown that the performance of wireless multihop ad hoc networks is very poor. In this paper, we first demonstrate that one important reason of the poor performance is the close coupling between medium contention and network congestion. Therefore, we present a framework of distributed flow control and medium access control to address both medium contention and network congestion. The proposed scheme utilizes the MAC layer control frames to efficiently conduct the network layer's flow control function and only allows the upstream nodes to forward enough packets to make it possible for the downstream nodes to fully utilize the shared channel but never introduce severe MAC collisions and network congestion. Extensive simulations illustrate that the proposed scheme well controls congestion and greatly alleviates medium collisions. It achieves up to 12 times the end-to-end throughput of IEEE 802.11, maintains a short delay and a low control overhead, and improves the fairness regardless of the hop count and the traffic load     

Efficient Terahertz Plasmonic Absorbers with V-Grooves Using Highly Doped Silicon Substrate and Simple Wet-Etching Techniques

We experimentally demonstrate that at terahertz frequencies perfect plasmonic absorbers made from a 3D V-groove array in a highly doped silicon wafer can be easily realized using simple wet-etching process. The surface plasmon modes can be excited by the V-groove array and get decayed when they propagate along the silicon surface and enter the grooves, inducing a broadband near-zero dip in the reflection spectra. The reflection spectrum of the fabricated absorber is characterized using a terahertz time-domain spectroscopy system, and the experimental results are in good agreement with numerical simulations. The high performance including high absorptivity and large bandwidth together with the easy fabrication processes presented in this paper make this plasmonic absorber promising for a wide range of practical applications in terahertz regime.     

晶粒度对纳米铜粉抗氧化能力的影响(英文)

以KBH4和维生素C(VC)为还原剂,以CuSO4·5H2O为原料,以EDTA为络合剂,PVP为分散剂,用液相还原法制备不同晶粒度的纳米铜粉。不同晶粒度的纳米铜粉同时在空气中放置1h后,进行XRD、DTA-TG以及TEM检测。结果表明:不同粒度的纳米铜粉在空气中抗氧化能力不同,晶粒度越大抗氧化能力越强。晶粒度大于75nm时在空气中放置1h不被氧化,平均晶粒度为75nm的纳米铜粉在120℃时开始氧化。纳米铜粉的熔点很低,进行TEM检测时,在电子束照射下颗粒熔融长大。     

Honeypot game‐theoretical model for defending against APT attacks with limited resources in cyber‐physical systems

A cyber‐physical system (CPS) is a new mechanism controlled or monitored by computer algorithms that intertwine physical and software components. Advanced persistent threats (APTs) represent stealthy, powerful, and well‐funded attacks against CPSs; they integrate physical processes and have recently become an active research area. Existing offensive and defensive processes for APTs in CPSs are usually modeled by incomplete information game theory. However, honeypots, which are effective security vulnerability defense mechanisms, have not been widely adopted or modeled for defense against APT attacks in CPSs. In this study, a honeypot game‐theoretical model considering both low‐ and high‐interaction modes is used to investigate the offensive and defensive interactions, so that defensive strategies against APTs can be optimized. In this model, human analysis and honeypot allocation costs are introduced as limited resources. We prove the existence of Bayesian Nash equilibrium strategies and obtain the optimal defensive strategy under limited resources. Finally, numerical simulations demonstrate that the proposed method is effective in obtaining the optimal defensive effect.     

全业务时代,集团业务建设思考

讨论全业务时代集团业务发展的新要求,分析现行支撑系统的不足,分析构建以集团客户为中心,优化流程,促进协同运作,灵活配置等特点的全业务支撑体系的重要性,给出对新形势下集团业务建设的建议。     

高度取向ZnO薄膜的介电和光波导特性研究

用溶胶凝胶法在不同的基片上制备了具有高度 ｃ 轴即（００２）取向的 Ｚｎ Ｏ 薄膜,研究了溶剂、稳定剂等对合成的先体溶液的影响。对薄膜的 Ｘ Ｒ Ｄ 分析表明随热处理温度的增加,ｃ 轴取向度增大,并且薄膜的晶粒尺寸在 ３００ ° Ｃ～５００ ° Ｃ 范围内增幅较大。用端面耦合的方法测量了制备在 Ｓｉ Ｏ２／ Ｓｉ（１１１）基片上薄膜的波导损耗,即随热处理温度的增加,波导损耗增大,主要来源于 Ｚｎ Ｏ 薄膜与 Ｓｉ Ｏ２ 的界面及晶粒的散射。制备在 Ｐｔ／ Ｓｉ Ｏ２／ Ｓｉ（１１１）基片上薄膜的相对介电常数为 ７～１３,电阻率则为 １．７×１０４ Ω·ｃｍ ～９．８×１０５ Ω·ｃｍ 。     

Design of an ultra fast pipelined wavelength scheduler for optical burst switching

Optical Burst Switching (OBS) is an emerging technology that allows variable size data bursts to be transported directly over DWDM links without encountering O/E/O conversion. In OBS, before the transmission of a data burst, a burst header is transmitted through an electronic control path, setting up and tearing down optical paths on-the-fly. Data bursts can remain in the optical domain and pass through the OBS network transparently. Unfortunately, system performance will be greatly degraded, if burst scheduling requests cannot be processed in time. This article quantitatively studied the negative impact of control path overloading on the performance of OBS networks. Results have shown that control path overloading greatly affects the performance of the OBS routers, especially for systems with large WDM channel counts. In order to remove this performance bottleneck, we have designed and implemented an ultra fast pipelined burst scheduler that is able to process a burst request every two clock cycles, regardless of the number of WDM channels per link. The design has been implemented in Verilog HDL and synthesized to FPGAs. Circuit level simulation results confirm the correctness of the design. The circuit has achieved 100 MHz in Altera Cyclone II devices, allowing the scheduler to process a burst request every 20 ns. To the authors’ best knowledge, this is the fastest implementation of burst scheduling algorithms.