Cosleeping (bedsharing) among infants and toddlers

This study was designed to investigate the effect of retaining coronal tooth substance on the performance of post-retained core materials, and to compare the fracture resistance of the system with an intact tooth prepared to similar dimensions. Ten teeth restored with post-retained silver amalgam, and 10 teeth restored with silver-glass cermet, all with a retained single wall of coronal tooth substance, were compared with 10 unrestored teeth prepared to similar dimensions when subjected to a shearing load. The results showed no statistically significant difference between the unrestored teeth and those restored with a silver-glass cermet. Whilst the teeth restored with silver amalgam had a significantly higher fracture resistance (P > 0.01) there was greater tendency to root fracture.     

Optimal Conditions for Preparing Ultra-Fine CeO2 Powders in A Submerged Circulative Impinging Stream Reactor

Cerium carbonate powders were produced in a submerged circulation impinging stream reactor (SCISR) from Ce(NO3)3·6H2O. NH4HCO3 was used as a precipitant in the reaction. Cerium carbonate powders were roasted to produce ultra-fine cerium dioxide (CeO2) powders. The optimal conditions of such production process were obtained by orthogonal and one-factor experiments. The results showed that ultra-fine and narrowly distributed cerium carbonate powders were produced under the optimal flowing conditions. The concentrations of Ce(NO3)3 and NH4HCO3 solutions were 0.25 and 0.3 mol·L-1, respectively. The concentration of PEG4000 added in these two solutions was 4 g·L-1. The stirring ratio, reaction temperature, feeding time, solution pH, reaction time and digestion time were 900 r·min-1, 80 ℃, 20 min, 5～6, 5 min and 1 h, respectively. The final product, CeO2 powders, was obtained by roasting the produced cerium carbonate in air for 3 h at 500 ℃. The finally produced CeO2 powders were torispherical particles with a narrow size distribution of 0.8～2.5 μm. The crystal structure of CeO2 powders belonged to cubic crystal system and its space point group was O5H-FM3M. Under optimal conditions, powders produced by SCISR were finer and more narrowly distributed than that by Stirred Tank Reactor (STR).     

Window materials for high power gyrotron

The room temperature application of sapphire as window material at higher frequencies is not feasible since its absorption coefficient increases almost linearly with increasing frequency in the millimeter wavelength region. At cryogenic temperature the absorption coefficient value decreases only by a few factors (factor of 2 to 3) in the 90 – 200 GHz region. The earlier reported temperature squared dependence (decrease) in the absorption coefficient or the loss tangent value is totally absent in our broad band continuous wave data we are reporting here (at 6.5 K, 35K, 77K and 300K) and one we reported at conferences earlier. Our results are verified by another technique. We utilize our precision millimeter wave dispersive Fourier transform spectroscopic techniques at room temperature and at cryogenic temperatures The extra high resistivity single crystal compensated silicon is no doubt the lowest loss material available at room temperature in the entire millimeter wavelength region At higher millimeter wave frequencies an extra high resistivity silicon window or an window made with extra high resistivity silicon coated with diamond film would certainly make a better candidate in the future. A single free standing synthetic diamond window seems to have higher absorption coefficient values at millimeter wavelength region at this time although it is claimed that it possesses good mechanical strength and higher thermal conductivity characteristics. It certainly does not rule out the use of diamond film on a single crystal high resistivity silicon to improve its mechanical strength and thermal conductivity     

Acute bilateral striatal necrosis in an infant: CT and MRI

We report a case of acute bilateral striatal necrosis in an infant. CT and MRI findings are described.     

基于ASP的网站后台安全解决方案

本文系统的分析了“黑客”对于ASP网站后台的入侵手段,结合我国网站管理员水平及经验参差不齐的现状,给出了简单且有效的ASP网站后台安全解决方案。使大多数编程水平不高的管理员也能杜绝网站后台的安全隐患。     

可编程序控制器在催化联锁系统的应用

随着工厂自动化程度的提高，对可编程控制器系统的可靠性要求越来越高，特别是炼油厂、化工厂、电站、钢铁厂以及环保项目中，停车将会给工厂带来的昂贵的代价。在这种情况下,冗余控制器能显著降低生产停滞的风险。简单介绍了可编程序控制器的冗余系统，并结合具体实例说明了冗余系统在其应用过程中的安全可靠性。     

Glucosamine-induced insulin resistance in 3T3-L1 adipocytes is caused by depletion of intracellular ATP

Glucosamine, which enters the hexosamine pathway downstream of the rate-limiting step, has been routinely used to mimic the insulin resistance caused by high glucose and insulin. We investigated the effect of glucosamine on insulin-stimulated glucose transport in 3T3-L1 adipocytes. The Delta-insulin (insulin-stimulated minus basal) value for 2-deoxyglucose uptake was dramatically inhibited with increasing concentrations of glucosamine with an ED50 of 1.95 mM. Subcellular fractionation experiments demonstrated that reduction in insulin-stimulated 2-deoxyglucose uptake by glucosamine was due to an inhibition of translocation of both Glut 1 and Glut 4 from the low density microsomes (LDM) to the plasma membrane. Analysis of the insulin signaling cascade revealed that glucosamine impaired insulin receptor autophosphorylation, insulin receptor substrate (IRS-1) phosphorylation, IRS-1-associated PI 3-kinase activity in the LDM, and AKT-1 activation by insulin. Measurement of intracellular ATP demonstrated that the effects of glucosamine were highly correlated with its ability to reduce ATP levels. Reduction of intracellular ATP using azide inhibited Glut 1 and Glut 4 translocation from the LDM to the plasma membrane, insulin receptor autophosphorylation, and IRS-1 tyrosine phosphorylation. Additionally, both the reduction in intracellular ATP and the effects on insulin action caused by glucosamine could be prevented by the addition of inosine, which served as an alternative energy source in the medium. We conclude that direct administration of glucosamine can rapidly lower cellular ATP levels and affect insulin action in fat cells by mechanisms independent of increased intracellular UDP-N-acetylhexosamines and that increased metabolism of glucose via the hexosamine pathway may not represent the mechanism of glucose toxicity in fat cells.     

Muscle mass and fat mass in relation to bone mineral density in very old men and women: the Framingham Heart Study

Aim of the study was investigate the cross-sectional relationship between body composition and bone mineral density (BMD) in very old men and women. The study sample consisted of 504 women and 285 men, aged 72-93 yr, participating in examination 22 (1992-1993) of the Framingham Heart Study. Total body BMD, regional BMD, and soft-tissue body composition was measured by dual-energy X-ray absorptiometry. Both muscle mass and percentage body fat were positively associated with total body BMD in women. After adjustment for age, physical activity, smoking status, estrogen use, and thiazide use, BMD increased with increasing tertile of muscle mass (p = 0.007) and with increasing tertile of percentage body fat (p = 0.0001) in women. In men muscle mass, not percentage body fat, was positively associated with BMD. After adjustment for potential confounders, BMD remained associated with muscle mass only (p = 0.02). These results were similar for leg BMD and arm BMD. The study suggests that the influence of muscle and fat mass on bone mineral density is different between very old men and women.     

Dominant mode characteristics of circular groove guide

Circular groove guide is a kind of waveguide for millimeter waves with low loss, large dimensions, and low dispersion. In this paper, the dominant mode characteristics of it is analysed. The technique that mode macthing method combines with point matching method is used to derive the Nth-order characteristic equation of the guide. The 1st order, 2nd order and 3rd order approximate curves that the normalized cutoff wavelength of circular groove guide varies with c/a are given. The attenuation curves are given at 1mm, 1.5mm and 3mm wavelength. The numerical results are in well agreement with the experimental results published.