Multi-user web service selection based on multi-QoS prediction

In order to find best services to meet multi-user’s QoS requirements, some multi-user Web service selection schemes were proposed. However, the unavoidable challenges in these schemes are the efficiency and effect. Most existing schemes are proposed for the single request condition without considering the overload of Web services, which cannot be directly used in this problem. Furthermore, existing methods assumed the QoS information for users are all known and accurate, and in real case, there are always many missing QoS values in history records, which increase the difficulty of the selection. In this paper, we propose a new framework for multi-user Web service selection problem. This framework first predicts the missing multi-QoS values according to the historical QoS experience from users, and then selects the global optimal solution for multi-user by our fast match approach. Comprehensive empirical studies demonstrate the utility of the proposed method.     

Dehydrogenation of Cyclohexene on Platinum Nanoclusters on a Thin Film of Al2O3/NiAl(100)

Using a scanning-tunneling microscope, reflection high-energy electron diffraction and photoelectron spectra with synchrotron radiation, we investigated the temperature dependence of the dehydrogenation of cyclohexene (C₆H₁₀) adsorbed on Pt nanoclusters supported on an ultra-thin film of Al₂O₃/NiAl(100). The Pt clusters, grown by vapor deposition, are structurally ordered and exhibit a mean diameter 2.2 nm and height 0.4 nm. The progress of dehydrogenation was monitored through the temporal variation of C 1s photoelectron spectra; analysis of these features revealed that the dehydrogenation of cyclohexene with increasing sample temperature occurs as a sequential process beginning around 150 K, a temperature significantly less than that for Pt single-crystal surfaces. The dehydrogenation behavior, particularly the decomposition into elemental carbon, is found to vary with Pt coverage.     

Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression

Based on an extensive experimental program, this paper studies the behavior of high strength concrete and steel fiber reinforced high strength concrete under uniaxial and triaxial compression. Triaxial stress-strain relations and failure criteria are used to evaluate the effect of steel fiber reinforcement on the mechanical properties of high strength concrete in triaxial compression, which is found to be insignificant.     

A novel synthesis method for the preparation of aromatic poly(imide benzoxazole) from trimellitic anhydride chloride and bis(o‐aminophenol)

A poly(imide benzoxazole) was prepared directly from trimellitic anhydride chloride and 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane (BisAPAF) monomers in a two‐step method. In the first step, a poly(hydroxyamide amic acid) precursor was synthesized by the low‐temperature solution polymerization in an organic solvent. Subsequently, thermal cyclodehydration of the poly(hydroxyamide amic acid) precursor at 350°C produced the corresponding poly(imide benzoxazole). The inherent viscosity of the precursor polymer was 0.22 dL/g. The cyclized poly(imide benzoxazole) showed a glass transition temperature (T_g) at 329°C and a 5% weight loss temperature at 530°C in nitrogen and at 525°C in air. The poly(imide benzoxazole) is amorphous as evidenced by the wide‐angle X‐ray diffraction measurement. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2388–2391, 2003     

纳米线/模板共构染料敏化二氧化钛太阳电池的制备

以清洁、制备过程简单、成本低廉的阴极电弧离子镀在低温成长染料敏化二氧化钛太阳能电池的二氧化钛模板,从模板上利用水热法生长出二氧化钛纳米线,形成理想的染料敏化太阳电池异质接面,具有高比表面积并利于染料的吸收,从而提升电池效率.最后加以封装成ITO glass/AIP-TiO2/[TiO2-nanowire(N3 dye)]/I2 LiI electrolyte/Pt/ITO glass太阳能电池组件,探讨了其微观结构对染料敏化二氧化钛太阳能电池光电转换效率的影响.     

Liquid-phase adsorption of dyes and phenols using pinewood-based activated carbons

Physical properties of activated carbons prepared from pinewood at different activation times (0.5, 1.5, 2.7, and 4.0 h) in steam at 900 °C were studied. The adsorption equilibria and kinetics of three dyes and three phenols (phenol, 3-chlorophenol, and o-cresol) from aqueous solutions on such carbons were then examined at 30 °C. The adsorption isotherms of phenols could be well fitted by the Freundlich equation, and those of dyes were adequately described by the Langmuir-Freundlich equation. The effect of microporosity of the carbons on adsorption capacity was explored. Four simplified kinetic models including pseudo-first-order equation, pseudo-second-order equation, intraparticle diffusion model, and the Elovich equation were selected to follow the adsorption processes. The adsorption of all six adsorbates could be best described by the Elovich equation. The kinetic parameters of this best-fit model were calculated and discussed.     

1-甲基-3-(7-氟-4-炔丙基-1,4-苯并噁嗪-3-酮-6-基)-1,3-喹唑啉-2,4-二酮的合成及其除草活性

标题化合物(SYP-298)是沈阳化工研究院的试验除草剂,由邻硝基苯甲酸经5步反应制得。其结构经核磁共振谱和质谱分析确证。SYP-298在温室条件下38 g a.i./hm2可防多种阔叶杂草,在600 g a.i./hm2对玉米和水稻安全。     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Processing, Microstructure, and Wear Behavior of Silicon Nitride Hot-Pressed with Alumina and Yttria

Commercial silicon nitride powder with A1₂O₃ and Y₂O₃ additives was hot-pressed to complete density. The resulting microstructure contained elongated grains with no trace of remaining α-Si₃N₄. The aspect ratio of the elongated grains increased with increasing soak time at a fixed hot-pressing temperature. X-ray diffraction analysis showed that the crystalline phase in the hot-pressed samples was β-sialon (Si_6−zAl_zO_zN_8−z) with z values that increased with soak time. The fracture strength and fracture toughness of the samples increased as the aspect ratio of the grains increased. The Vickers hardness decreased slightly as the soak time was increased, which was attributed to a grain size effect. Wear tests of silicon nitride against silicon nitride were conducted on a reciprocating pin-on-disk apparatus with paraffin oil as a lubricant. Correlation studies of wear with microstructure and mechanical properties were performed. The wear rate increased rapidly with increasing soak time in spite of the increased strength and toughness. This was attributed to increased third-body wear caused by pullout of pieces from the wear surface. The pullout mechanism was not conclusively identified. However, TEM examination showed clear evidence of dislocation motion under the wear scar. Grain boundary microstresses caused by the anisotropic thermal expansion and elastic properties of the elongated grains may have contributed to the observed pullout.     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006