多分支平行双线输电线故障定位算法的研究

本文针对多分支平行双线输电线提出了一种新的故障定位方法。应用相同的算法对全部分支进行逐条搜索,故障分支和故障点位置可以一并被确定。经仿真证明,该方法是有效的。     

Interaction of catechin with poly(L-proline)

Summary Catechin binds strongly to both poly(vinylpyrrolidone) and poly(L-proline) in dilute aqueous solution, inducing a collapse of the more flexible poly(vinylpyrrolidone) chains, but forming a microgel with the more extended poly(L-proline) chains. Low concentrations of poly(L-proline) inhibit the discoloration of aqueous solutions of catechin, thereby implicating the ortho hydroxyyl groups in the catechol moiety in the binding process. Modeling shows that the likely binding sites on poly(L-proline) arise from two minor local conformations. These minor conformations are less frequent in poly(-hydroxy-L-proline) than in poly(L-proline), which may explain why catechin interacts more strongly with poly(L-proline) than with poly(-hydroxy-L-proline).     

Shearing interferometer with a Kitty self-pumped phase-conjugate mirror

A shearing interferometer with a Kitty-type self-pumped phase-conjugate mirror is developed. The measurement of the focal length of a lens is demonstrated with a standard deviation of 1.5%. In addition, we measured the microdisplacement in the range of tens of micrometers with an error less than 2% by using the interferometer.     

Study on the solidification cracking behaviour of high strength aluminum alloy welds: Effects of alloying elements and solidification behaviours

The solidification cracking susceptibility of the 7000 series Al-Zn-Mg high strength aluminum alloy has been studied. The cracking behaviour of the specimens were evaluated by a Tig-a-Ma-Jig Varestraint test process under various augmented strain conditions. It has been experimentally observed that the addition of copper decreased the solidification cracking resistivity of the high strength aluminum alloy weld metal by increasing the total crack length (TCL). The effect of the addition of manganese on the solidification cracking behaviour is found to be beneficial by markedly decreasing the solidification cracking susceptibility as the manganese content increases from 0.3 to 0.7%. This enhancement by manganese is understood to be attributed to the reduction of the mushy zone size during the solidification process. The effects of chromium and zirconium additions are also investigated. The weld metal containing zirconium is less sensitive to the solidification cracking than the weld metal containing chromium. In addition, the solidification behaviours of the tested alloys are also investigated and it is found that as the solidification temperature range (T) becomes narrow, the solidified structure becomes more dendritic in its features which is believed to create higher solidification cracking resistance.     

Design sensitivity analysis and optimization of nonlinear dynamic response for a motorcycle driving on a half-sine bump road

This paper analyses the design sensitivity of a suspension system with material and geometric nonlinearities for a motorcycle structure. The main procedures include nonlinear structural analysis, formulation of the problem with nonlinear dynamic response, design sensitivity analysis, and optimization. The incremental finite element method is used in structural analysis. The stiffness and damping parameters of the suspension system are considered as design variables. The maximum amplitude of nonlinear transient response at the seat is taken as the objective function during the optimization simulation. A more realistic finite element model for the motorcycle structure with elasto-damping elements of different material models is presented. A comparison is made of the optimum designs with and without geometric nonlinear response and is discussed.Nomenclature A amplitude of the excitation function - a ₀,a ₁ time integration constants for the Newmark method - ^t+t C _s secant viscous damping matrix at timet+t - ^t C _T tangent viscous damping matrix at timet - C linear part of ^t C _T - D _i ⁰ initial value of thei-th design variable - D _i instanenous value of thei-th design variables - ^t+t F^(t–1) total internal force vector at the end of iteration (i–1) and timet+t - ^t+t F _(NL) ^(i–1) nonlinear part of ^t+t F^(i–1) - f frequency of the excitation function - ^t+t K _s secant stiffness matrix at timet+t - ^t K _T tangent stiffness matrix at timet - K linear part of ^t K _T - effective stiffness matrix at timet - L distance between the wheel centres - M constant mass matrix - m _T number of solution time steps - NC number of constraint equations - Q nonlinear dynamic equilibrium equation of the structural system - ^t+t R external applied load vector at timet+t - t _e active time interval for the excitation function - ^t U displacement vector of the finite element assemblage at timet - velocity of the finite element assemblage at timet - ^t Ü acceleration vector of the finite element assemblage at timet - ^t+t U ⁽ⁱ⁾ displacement vector of the finite element assemblage at the end of iterationi and timet+t - velocity vector of the finite element assemblage at the end of iterationi and timet+t - ^t+t Ü⁽ⁱ⁾ acceleration vector of the finite element assemblage at the end of iterationi and timet+t - U ⁽ⁱ⁾ vector of displacement increments from the end of iteration (i–1) to the end of iterationi at timet+t - V driving speed of motorcycle - x vector of design variable - () quantities of variation - ₀ objective function - _i i-th constraint equation     

Crashworthiness design of vehicle by using multiobjective robust optimization

Although deterministic optimization has to a considerable extent been successfully applied in various crashworthiness designs to improve passenger safety and reduce vehicle cost, the design could become less meaningful or even unacceptable when considering the perturbations of design variables and noises of system parameters. To overcome this drawback, we present a multiobjective robust optimization methodology to address the effects of parametric uncertainties on multiple crashworthiness criteria, where several different sigma criteria are adopted to measure the variations. As an example, a full front impact of vehicle is considered with increase in energy absorption and reduction of structural weight as the design objectives, and peak deceleration as the constraint. A multiobjective particle swarm optimization is applied to generate robust Pareto solution, which no longer requires formulating a single cost function by using weighting factors or other means. From the example, a clear compromise between the Pareto deterministic and robust designs can be observed. The results demonstrate the advantages of using multiobjective robust optimization, with not only the increase in the energy absorption and decrease in structural weight from a baseline design, but also a significant improvement in the robustness of optimum.     

GNSS卫星信号模拟器码和载波NCO研究与实现

NCO是卫星信号模拟器中频信号处理的关键部分;介绍了GNSS卫星信号模拟器码NCO和载波NCO的原理及作用,建立DDS模型,确定基本参数并根据参数设计了码NCO和载波NCO基本结构;给出了码NCO和载波NCO的实现过程,利用verilog在Xilinx'ISE 11.2和modelsim6.5中完成载波NCO和码NCO的设计和仿真,在FPGA中进行了实现,并给出仿真波形和信号频谱图;本码NCO和载波NCO模块已应用于某型GNSS模拟器样机,通过程序仿真与样机测试,证明本码NCO和载波NCO模块性能满足GNSS卫星信号模拟器系统需求.     

基于二阶梯度的图像增强算法研究

针对PCB图像的特点对图像进行增强处理,使得图像的边缘更加突出,灰度的对比度增加,同时滤除靠近边缘的噪声,为后续图像分割时更有效的选取阈值打下良好基础。使用二阶梯度算子获得图像的增强效果,实验表明,不仅解决了边缘附近噪声去除问题,而且有效地突出了边缘信息,图像的黑白对比分明,尤其是目标图像靠近边缘部分灰度值明显高于其他的非边缘区域。     

平均保障延误时间（MLDT）建模方法研究

针对现代装备系统的精确化保障要求,对装备保障的主要参数指标MLDT进行了建模分析,主要分析了三种计算方法：图估法、解析法和基于排队论的MLDT建模理论,解决了评估MLDT指标时的定量计算问题。     

Sorcery: Overcoming deceptive votes in P2P content sharing systems

Deceptive voting behaviors of malicious users are known as the main reason of causing content pollution in Peer-to-Peer (P2P) content sharing systems. Due to the nature of P2P overlay network such as self-organization and anonymity, the existing methods on identifying deceptive votes are not effective, especially for collusive attackers. This paper presents Sorcery, a novel active challenge-response mechanism based on the notion that one side of interaction with the dominant information can detect whether the other side is telling a lie. To make each client obtain the dominant information, our approach introduces the social network to the P2P content sharing system; therefore, clients can establish the friend-relationships with the users who are either acquaintances in reality or those reliable online friends. Using the confidential voting histories of friends as own dominant information, the client challenges target content providers with the overlapping votes of both his friends and the target content provider, thus detecting whether the content provider is a deceptive user. Moreover, Sorcery provides the punishment mechanism which can reduce the impact brought by deceptive voting behaviors, and our work also discusses some key practical issues. The experimental results illustrate that Sorcery can effectively overcome the problem of deceptive voting behaviors in P2P content sharing systems, and work better than the existing reputation models.