Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.     

Two-dimensional Kerr-Fourier imaging of translucent phantoms in thick turbid media

Translucent scattering phantoms hidden inside a 5.5-cm-thick Intralipid solution were imaged as a function of phantom scattering coefficients by the use of a picosecond time- and space-gated Kerr-Fourier imaging system. A 2-mm-thick translucent phantom with a 0.1% concentration (scattering coefficient) difference from the 55-mm-thick surrounding scattering host can be distinguished at a signal level of ~10(-10) of the incidence illumination intensity.     

An evaluation of the algorithms for determining local cerebral metabolic rates of glucose using positron emission tomography dynamic data

Measurement of the local cerebral metabolic rate of glucose (LCMRGlc) and the individual rate constant parameters of the [(18 )F]2-fluoro-2-deoxy-D-glucose (FDG) model can provide a clearer understanding and insight to the physiological processes in the human brain, and a quicker and more accurate means of diagnosis in clinical applications. A systematic study using simulated and clinical tissue time activity data is presented to evaluate several existing and newly developed major algorithms used for determining LCMRGlc and the individual rate constants from positron emission tomography dynamic data. The computational and statistical properties of the autoradiographic approach, weighted and unweighted nonlinear least squares methods, Patlak graphic approach, weighted integration method, linear least squares and generalized linear least squares methods are investigated and discussed in this paper.     

Fast Li+ Transport via Silica Network-Driven Nanochannels in Ionomer-in-Framework for Lithium Metal Batteries

For the development of all-solid-state lithium metal batteries (LMBs), a high-porous silica aerogel (SA)-reinforced single-Li⁺ conducting nanocomposite polymer electrolyte (NPE) is prepared via two-step selective functionalization. The mesoporous SA is introduced as a mechanical framework for NPE as well as a channel for fast lithium cation migration. Two types of monomers containing weak-binding imide anions and Li⁺ cations are synthesized and used to prepare NPEs, where these monomers are grafted in SA to produce SA-based NPEs (SANPEs) as ionomer-in-framework. This hybrid SANPE exhibits high ionic conductivities (≈10⁻³ S cm⁻¹), high modulus (≈10⁵ Pa), high lithium transference number (0.84), and wide electrochemical window (>4.8 V). The resultant SANPE in the lithium symmetric cell possesses long-term cyclic stability without short-circuiting over 800 h under 0.2 mA cm⁻². Furthermore, the LiFePO₄|SANPE|Li solid-state batteries present a high discharge capacity of 167 mAh g⁻¹ at 0.1 C, good rate capability up to 1 C, wide operating temperatures (from −10 to 40 °C), and a stable cycling performance with 97% capacity retention and 100% coulombic efficiency after 75 cycles at 1 C and 25 °C. The SANPE demonstrates a new design principle for solid-state electrolytes, allowing for a perfect complex between inorganic silica and organic polymer, for high-energy-density LMBs.     

Room-Temperature-Processable Highly Reliable Resistive Switching Memory with Reconfigurability for Neuromorphic Computing and Ultrasonic Tissue Classification

Reversible metal-filamentary mechanism has been widely investigated to design an analog resistive switching memory (RSM) for neuromorphic hardware-implementation. However, uncontrollable filament-formation, inducing its reliability issues, has been a fundamental challenge. Here, an analog RSM with 3D ion transport channels that can provide unprecedentedly high reliability and robustness is demonstrated. This architecture is realized by a laser-assisted photo-thermochemical process, compatible with the back-end-of-line process and even applicable to a flexible format. These superior characteristics also lead to the proposal of a practical adaptive learning rule for hardware neural networks that can significantly simplify the voltage pulse application methodology even with high computing accuracy. A neural network, which can perform the biological tissue classification task using the ultrasound signals, is designed, and the simulation results confirm that this practical adaptive learning rule is efficient enough to classify these weak and complicated signals with high accuracy (97%). Furthermore, the proposed RSM can work as a diffusive-memristor at the opposite voltage polarity, exhibiting extremely stable threshold switching characteristics. In this mode, several crucial operations in biological nervous systems, such as Ca²⁺ dynamics and nonlinear integrate-and-fire functions of neurons, are successfully emulated. This reconfigurability is also exceedingly beneficial for decreasing the complexity of systems—requiring both drift- and diffusive-memristors.     

Effects of material combination on laser beam drilling of a metal foil using a cover plate

This research investigated the microdrilling characteristics of metal foils depending on the materials of the cover plates and metal foils in the cover plate-laser beam machining (c-LBM) process, which is a method to achieve better quality in metal foil machining with a given piece of equipment. Laser beam drilling using a nanosecond pulsed laser was carried out on 10-µm-thick stainless steel 304 (STS304), nickel, and copper foils with 100-µm-thick cover plates of each material. Consequently, STS304 was found to be an effective cover plate material for reducing the hole diameter and spatter deposition on metal foils. Compared to the results without using a cover plate, the average hole diameter and the area of spatter deposition decreased by up to 77% and 96%, respectively, by using the STS304 cover plate. Meanwhile, the thermal deformation of the STS304 and nickel foils was prevented by using a cover plate, while the copper foil was barely deformed even without a cover plate. Lastly, it was remarkable that the copper foil was drilled with approximately 67% lower pulse energy than the effective minimum pulse energy required to drill it by using the STS304 cover plate, resulting in a smaller hole with little spatter.     

A Novel and Facile Route to Synthesize Atomic‐Layered MoS2 Film for Large‐Area Electronics

High‐quality and large‐area molybdenum disulfide (MoS₂) thin film is highly desirable for applications in large‐area electronics. However, there remains a challenge in attaining MoS₂ film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few‐layered MoS₂ film with new precursors via chemical vapor deposition. Prior to growth, an aqueous solution of sodium molybdate as the molybdenum precursor is spun onto the growth substrate and dimethyl disulfide as the liquid sulfur precursor is supplied with a bubbling system during growth. To supplement the limiting effect of Mo (sodium molybdate), a supplementary Mo is supplied by dissolving molybdenum hexacarbonyl (Mo(CO)₆) in the liquid sulfur precursor delivered by the bubbler. By precisely controlling the amounts of precursors and hydrogen flow, full coverage of MoS₂ film is readily achievable in 20 min. Large‐area MoS₂ field effect transistors (FETs) fabricated with a conventional photolithography have a carrier mobility as high as 18.9 cm² V^?1 s^?1, which is the highest reported for bottom‐gated MoS₂‐FETs fabricated via photolithography with an on/off ratio of ≈10⁵ at room temperature.     

Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing

Although new technologies allow for less effort in prototyping, physical testing still remains an important step in the product development cycle. Well‐planned experiments are useful to guide the decision‐making process. During the design of an experiment, one of the challenges is to balance limited resources and system constraints to obtain useful information. It is common that prototypes are composed of several parts, with some parts more difficult to assemble than others. And, usually, there is only one piece available of each part type and a large number of different setups. Under these conditions, designs with randomization restrictions become attractive approaches. Considering this scenario, a new and additional criterion, minimum setup, to construct split‐plot type designs is presented. Designs with the minimum number of setups of the more difficult parts, which are especially useful for screening purposes in physical prototype testing, are discussed. The use of the proposed criterion combined with minimum aberration for selecting a regular design is shown through a real application in testing car prototypes. As a tool to practitioners, catalogs of selected 32‐run minimum setup minimum aberration split‐split‐plot and split‐split‐split‐plot designs are presented. More complete catalogs are available as Supporting information. Copyright © 2015 John Wiley & Sons, Ltd.     

Smart Utilization of Carbon Dots in Semiconductor Photocatalysis

Efficient capture of solar energy will be critical to meeting the energy needs of the future. Semiconductor photocatalysis is expected to make an important contribution in this regard, delivering both energy carriers (especially H₂) and valuable chemical feedstocks under direct sunlight. Over the past few years, carbon dots (CDs) have emerged as a promising new class of metal‐free photocatalyst, displaying semiconductor‐like photoelectric properties and showing excellent performance in a wide variety of photoelectrochemical and photocatalytic applications owing to their ease of synthesis, unique structure, adjustable composition, ease of surface functionalization, outstanding electron‐transfer efficiency and tunable light‐harvesting range (from deep UV to the near‐infrared). Here, recent advances in the rational design of CDs‐based photocatalysts are highlighted and their applications in photocatalytic environmental remediation, water splitting into hydrogen, CO₂ reduction, and organic synthesis are discussed.