Recognition of depressed affect in hospitalized psychiatric patients: staff and patient perceptions

A comparison of self-report vs. observer rating of depressed mood in a heterogenous inpatient population revealed wide variations in concordance among diagnostic groups. Patients diagnosed as having Affective Psychosis and "Other' illnesses showed the highest correlation between four self-report scales and an observer rating scale. Patients with a diagnosis of depressive Neurosis showed only modest correlation, while Schizophrenics revealed no significant correlation, on these instruments, suggesting inconsistent communication of affect from Schizophrenic patients to observers. In contrast, when self-report scales were intercorrelated, patients in all four diagnostic categories showed highly significant correlations, indicating that they were consistently reporting their affective state on these instruments. The implications of these findings for future research as well as for practical clinical management are discussed.     

Calculating the elastic moduli of steel-fiber reinforced concrete using a dedicated empirical formula

The equivalent inclusion method (EIM) is adopted to study the characteristics of the equivalent material properties of steel-fiber reinforced concrete as a function of the volume fraction and the length to diameter ratio of the fibers. It is found that the equivalent material moduli of concrete reinforce with randomly orientated and distributed fibers are insensitive to the length to diameter ratio of the steel fibers. A set of empirical formulae is then proposed for the purposes of engineering applications. The proposed empirical model can simplify the calculation of the equivalent material moduli. Verifications of the proposed empirical formulae with the EIM model and with experimental data are performed with two examples. The first is a compression test. The second is 4 point bending test. The empirical formulae, based on the equivalent inclusion method proposed in this study, represent an alternative means of quickly calculating the effective elastic modulus of steel-fiber reinforced concrete materials.     

Modeling and control for a Gough‐Stewart platform CNC machine

In this paper, a complete dynamic model on task space for a 6 degrees of freedom (DOF) Gough‐Stewart platform‐type computer numerical control (CNC) machine is derived. The rotation terms of the legs are included for those inertia effects cannot be negligible in the machine tool applications. The formulation derived by means of the Euler‐Lagrange method is convenient for designing the adaptive control law. Also, the average‐type force model for end milling process is derived and included in the dynamic model and control. A composite adaptive control scheme is developed by use of filtering dynamics technique. An appropriate estimator gain is designed in the parameter adaptation law that is useful for estimating the selected important cutting parameters. Experimental results verify the proposed adaptive control scheme can achieve good tracking performance. © 2004 Wiley Periodicals, Inc.     

A hybrid rough-cut process planning for quality

This paper proposes a hybrid approach to develop a rough-cut process planning for quality. The approach aims to determine key process alternatives with an adequate process capability by systematic quality planning and assessment methods during the initial planning stage of the product development cycle. It consists of four steps: (1) identification of quality characteristics (2) planning of the process quality by combining quality function deployment (QFD) with the process failure mode and effect analysis (FMEA) (3) a selection of process alternatives, and (4) an assessment of process quality through a quality measure index, called the composite process capability (CCP). The process alternatives with an adequate CCP selected during the early design stage can then be not only used as the guidelines for detailed process planning but also as feedback for the product design and other functions for design evaluation and improvement. This approach is helpful to reduce or even eliminate the iterations of modification of process plans. A prototype system called the rough-cut process planning for quality (RPPFQ) has been developed for validation. A case study concerned with a satellite frame part is presented to illustrate the approach and prototype system in this paper.     

Evolution of RFIC Handset PAs

The first official shift in communication systems from fixed-location devices to portable/mobile devices happened in 1973 when Martin Cooper, general manager of Motorola's Communications Systems Division at the time, placed the first mobile call from a New York street using AT&T's network. Four years later, the first cell phone was made in Chicago with free trials offered to more than 2,000 people. The first commercial handset to receive FCC approval was Motorola's DynaTAC in 1983 [1], which was made available to the public a year later. This 1.13 kg (2.5 lb) phone that cost consumers US$3,500 was only able to achieve approximately 35 minutes of talk time and took almost 15 years to develop with the cost totaling US$100 million.     

Matrix analysis of 2-D microresonator lattice optical filters

We present a transfer matrix analysis of a two-dimensional (2-D) filter to study its frequency response functions. The (M/spl times/N) array consists of N independent columns of microring resonators side-coupled to two channel bus waveguides, with equal spacing between columns and each column consisting of M coupled resonators. We show that such a general 2-D lattice network of lossless and symmetric resonators can approximate an ideal bandpass filter characterized by a flat-top box-like amplitude response without out-of-band sidelobes, and a linear phase response. The bandwidth is determined by the coupling factor between resonators. The 2-D periodic structure exhibits nonoverlapping photonic bandgaps arising from the complementary transmission properties of the row and column arrays. The row array behaves as a distributed feedback grating giving rise to narrow bandgaps corresponding to the flat reflection passbands of the filter with out-of-band sidelobes. The column array, on the other hand, acts as a high-order coupled-cavities filter with broad bandgaps that overlap with the sidelobe regions, thereby effectively suppressing the sidelobes. The phase response is linear except near the band edges, where enhanced group delay limits the usable bandwidth of the filter to about 80%. The minimum size of the array required is about 3/spl times/10, but is ultimately limited by waveguide loss.     

Negative giant surface potential of vacuum-evaporated tris(7-propyl-8-hydroxyquinolinolato) aluminum(III) [Al(7-Prq)3] film

Negative giant surface potential was realized in a vacuum-evaporated film of tris(7-propyl-8-hydroxyquinolinolato) aluminum(III) [Al(7-Prq)₃]. Electroabsorption response of the film presented an inverted polarity to that of tris(8-hydroxyquinolinolato) aluminum (Alq₃), suggesting opposite noncentrosymmetry of molecular orientation. Asymmetric dice model with molecular geometric effect has been proposed, and propyl substitution at 7 position of the ligands was indicated to affects the molecular posture on the surface to invert the polarity of noncentrosymmetry. Our results opened a new possibility of controlling molecular orientation in a film for device applications.     

Downlink channel covariance matrix (DCCM) estimation and itsapplications in wireless DS-CDMA systems

The downlink channel covariance matrix (DCCM) is of vital importance in determining downlink beamforming weights for base station (BS) antenna array systems. For the frequency-division-duplex (FDD) mode, DCCM is difficult to obtain due to a lack of direct measurement of downlink channel responses. In this paper, a novel technique is proposed for estimating DCCM using uplink channel responses only, which does not need direction-of-arrival (DOA) estimation and its association. The downlink beamforming scheme is then proposed for wireless DS-CDMA systems, using the obtained DCCM information together with the so-called virtual uplink beamforming and power control technique. Computer simulations show that using the BS antenna array together with this new beamforming technique can provide larger system capacity than traditional DOA-based approaches, which just direct the main beam toward the desired user     

On the leverage of high-fT transistors foradvanced high-speed bipolar circuits

A detailed study on the leverage of high-f_T transistors for advanced high-speed bipolar circuit applications is presented. It is shown that for the standard ECL (emitter-coupled logic) circuit, the leverage of high f_T is limited by the passive resistors (emitter-follower resistor and collector load resistor) and wire delay, especially in the low-power regime. For the standard NTL (nonthreshold logic) circuit, the leverage is higher due to its front-end configuration and lower power supply value. As the passive resistors are decoupled from the delay path in various advanced circuits utilizing active-pull-down schemes, the leverage of high F_T becomes more significant