A Study of an Intelligent Battlefield Damage Assessment System Based on a Multi-agent System

Battlefield damage assessment is the key to Battlefield Damage Assessment and Repair (BDAR).We present an Intelligent Battlefield Damage Assessment System (IBDAS) based on multi-agent system technology. We first establish the system framework, and then study the interior structure and workflow of a problem allocation agent. The result shows that, there are many advantages to resolve the problem of battlefield damage assessment by applying multi-agent system technology, and it will bring significant military benefit.     

Preface

Since the founding of TEROTECHNOLOGY at the beginning of the 1970s, plant engineering and management have made great progress.People pay attention to the effects of fixed assets,because they play an important role in the development of a national economy.     

中国典型城市电网电动汽车容纳能力研究

分析了电动汽车在无序充电、错峰充电和连续充电模式下的电力负荷特性,并以典型配电网为研究对象,通过对3种模式下不同规模电动汽车接入后的配电网稳态运行情况进行计算,.校核节点电压偏差和元件负载率等配电网稳态运行指标,研究了各种充电模式下中国某典型城市电网的电动汽车容纳能力.     

聚醚固体电解质锂电池放电性能研究

利用氧亚甲基连接的聚氧乙烯-聚氧丙烯多嵌段共聚物或氧亚甲基连接的聚氧乙烯多嵌段共聚物与高氯酸锂的络合物作电池的电解质,锂片作负极,几种含钒的化合物作正极,组装了全固态二次锂电池.研究了不同正极材料、不同电解质和不同温度对电池短路放电性能的影响以及电池的重复短路放电性能.研究表明,正极材料V_6O_(13)的性能优于Na_(1+x)V_3O_8;电解质(PEO)_n·LiClO_4的性能优于(PEO-PPO)_n·LiClO_4,这与它们的电导率分别为3.2×10~(-3)S·cm~(-1)和2.2×10~(-3)S·cm~(-1)是一致的.     

舞台灯具国家标准特殊要求及LED舞台灯具的适用性

介绍了国家标准GB 7000.217-2008/IEC 60598-2-17：1984＋A2：1990《灯具第2-17部分：特殊要求舞台灯光、电视、电影及摄影场所（室内外）用灯具》的特殊要求,阐述了对该标准特殊要求条文的理解和解释以及其对LED舞台灯具的适用性,以帮助舞台灯具行业的设计、生产、检验和使用人员正确理解和应用舞台灯具国家标准。     

改进的对称分布期望估计量的性质

本文证明了改进后的对称分布期望估计量W_p在一定条件下具有无偏性和强相合性,并给出了方差的上界,其中:W_p.=1/n-2[np] sum from a-[ap] to i=[ap]+1 X_(j),0≤p<1/2     

INVESTIGATION ON SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS OF TiAl INTERMETALLIC COMPOUND

The self-propagating high-temperature syn-thesis method was used to synthesize the TiAl intermetalliccompound,and two kinds of synthesis modes were studied inthis paper.The results show that the thermal explosion modeis suitable for the synthesis of TiAI,the pre-heating tempera-ture has a great influence on the synthesis.Microstructurestudy show that the density of the sample fabricated by thermal explosion mode is higher than that fabricated by propa-gating mode.     

用moire技术测量平板玻璃折射率

本文描述了使用moire技术测量平板玻璃折射率的理论并进行了实验论证。测量方法简单且快捷。可精确测量任何透明材料的折射率。测量精确度可达10~(-5)。     

Fabrication and magnetic properties of Sm_3(Fe,Ti)_(29)N_x/α-Fe dual-phase nanocomposite permanent magnetic material

Sm3(Fe,Ti)29Nx/α-Fe dual-phase nanometer magnetic material was fabricated through rapid solidification, crystallization and nitridation of Sm-Fe (Ti) alloy. The effect of combination of rapid solidification and Ti alloy addition on the phase for- mation and microstructure of the Sm-Fe alloy is investigated in this paper. The mi- crostructure of amorphous phase and dual-phase nano-grain crystals before and after crystallization annealing were observed using a high-resolution transmission electron microscope (HREM). The dual-phase nano-grains after annealing were compacted together with a clear interface with the direct exchange-coupling mechanism. Different annealing processes were used to examine the melt-spun alloy. Comparison of the images of SEM showed that annealing at 750 ℃ for 10 min was most suitable to get homogeneous and nano-grains. No obvious kink was de- tected in the second quadrant of the hysteresis loop like a single hard magnet, and strong exchange coupling was found between hard magnets and soft magnets.     

损失气求取方法研究

当逸散时间较长时，用直线回归法采取损失气结果偏低，而逸散时间较短取点数少时，结果偏高。曲线拟合法是比较实用的一种方法，但计算工作量较大。经过模拟实验证明，在变围压条件下，甲烷的解吸规律也服从经验方程Ｑ＝ＷＪ［１－ｅｘｐ（１－ｍ＿１￣ｍ２／ｍ＿２］，并推导出迭代法求取损失量的计算公式。