Differences in lithospheric structures between two sides of Taihang Mountain obtained from the Zhucheng-Yichuan deep seismic sounding profile

A 2-D model of lithospheric velocity structures in the southern part of the North China Craton was obtained using data from the Zhucheng-Yichuan deep seismic sounding profile.Results show that there are great differences in lithospheric structures between two sides of Taihang Mountain.In the eastern region,the lithosphere is thinner,with a thickness of about 70-80 km,while in the western region,the thickness is 85-120 km.There is a jump of the lithospheric thickness across Taihang Mountain gravity anomaly b...     

Effects of land use and changes in cover on the transformation and transportation of iron:A case study of the Sanjiang Plain,Northeast China

Wetland reclamation has been ongoing in the Sanjiang Plain since the mid-1950s,which has resulted in major changes in wetlands and the agriculture ecosystem in the region that have influenced the iron output to the Sea of Okhotsk and limited the primary productivity in the North Pacific Ocean.This study was conducted to investigate the chemical forms of iron in different aquatic environments(agricultural water including groundwater,paddy water,and canal water;wetland water including marsh water,marsh stream...     

Modeling tree root diameter and biomass by ground-penetrating radar

Roots play a key role in ecosystem functioning as they transfer water and nutrients from soil to plants.Traditional methods for measuring roots are labor-intensive and destructive in nature,which limits quantitative and repeatable assessments in longterm research.Ground-penetrating radar(GPR) provides a non-destructive method to measure plant roots.Based on the superiority of GPR with 2 GHz frequency,we developed a new,practical method to estimate root biomass.First,average root matter density was measured ...     

Oscillation propagation features of the atmosphere around the Qinghai-Xizang Plateau during the spring season of typical strong and weak monsoon years

The interaction between the low-frequency atmospheric oscillation(Madden-Julian Oscillation,MJO) and the diabatic heating over the Qinghai-Xizang Plateau(QXP) from March to June is analyzed.The results show that there are respectively two and one wave trains around the QXP during the onset of the South China Sea monsoon in strong and weak monsoon years.The locations and strength of the wave train propagation differ between the strong and weak monsoon years.Because diabatic heating of the QXP prevents the lo...     

一种最小电压应力的软开关无桥PFC技术研究

针对传统桥式整流升压功率因数校正(PFC)电路效率较低的缺点,提出了一种最小电压应力的软开关无桥PFC电路拓扑.在理论分析和仿真验证的基础上,研制了一台300 W的实验样机.结果表明,改进的无桥PFC电路拓扑具有通态损耗低、电流采样简单,能实现开关管零电压关断和零电流开通,同时实现整流二极管零电压导通和接近零电流软关断...     

岩石龟裂系数法在火山岩裂缝储集层预测中的应用

 本文针对辽河东部凹陷油燕沟中生界火山岩的具体特征，采用纵波波速的比值——“龟裂系数”裂缝分析法［1,2,3］，研究了火山岩裂隙发育程度。综合龟裂系数裂缝分析及其他方法发现，该区中生界火山岩有效储集层的测井相特征主要表现为低密度、低中子、高声波时差和高伽马值等特征。此法的关键在于根据不同火山岩的岩性，选用合适的岩石骨架参数，在此基础上利用测井约束地震反演计算火山岩的层速度，进而计算出龟裂系数，然后根据已钻至火山岩井孔的测井相特征编制出火山岩预测厚度图。     

退火损伤对Er注入GaAs和Yb注入InP发光的影响

本文报道了CaAs∶Er、InP∶Yb发光样品的二次离子质谱、X-射线双晶衍射测量结果及其与Er离子的表面成份的关系.分析讨论了退火损伤对GaAs∶Er和InP∶Yb发光的影响以及Er~(3+)复合体发光中心模型.     

吹喷氧化物质点改善铁基合金的高温耐磨性

为了节省能源,国内外广泛开展了煤的流化床燃烧技术的研究。然而,流化床中埋管材料及其上面所焊鳍片材料耐高温磨蚀性能的提高,是推广这一技术的关键。采用共沉法或机械合金化方法已成功地制成氧化物弥散强化高温合金,不仅高温强度可以维持到合金的熔点附近,而且可以改善高温耐磨性,但这类合金制造工艺复杂、成本高,不适宜大量用于能源工业。向钢水中吹喷氧化物质点可以明显提高镇静钢的室温和高温强度,而且价     

Study of General Incomplete Star Interconnection Networks

IIntroduct1OllThe star graph【1]proposed as a particular case ofC叫ley graphs[ZJ Is vertex－and edge－symmetric．strongly hlerarchlcal,maximally tault－tolerant,strongly resilient and has diameter and node degreethat are superior to those of a slmll。－slied hypercube(which Is also a Cnyley graph)IOr parallelcomputers[3]．MNor references can be found In studying the star graph regarding its propertiesllJ,e毗edding cwabllity[4],communication c叩劝ility[5－71,andfanfaut－toierm尬 cap劝ility…     

THERMOGRAVIMETRIC STUDY OF DIRECT CARBURIZING BY NATURAL GAS

<正> 在渗碳等金属表面化学热处理过程中,金属的渗碳、脱碳、氧化、还原等均出现高温下重量变化,根据热天平的工作原理,可以对金属表面渗碳过程进行工艺研究和机理探讨。 我国的天然气资源丰富,直接用天然气作碳源在金属表面渗碳,似有值得推广采用的意义。 曾以20CrNiMo钢用热重法研究常压渗碳和真空渗碳两种工艺,大量实验结果说明:用热重法研究气体渗碳的工艺参数,并直接采用天然气渗碳,都是可行的。