Role of controlled debonding along fiber/matrix interfaces in the strength and toughness of metal matrix composites

In metal matrix composites toughness is derived primarily from the plastic work of rupture of ductile matrix ligaments between the fractured fibers and from the plastic work of simple shear separation along steps connecting major fracture terraces. In the optimization of tensile strength in the longitudinal and transverse directions together with the respective works of fracture the most important factor is the control of the extent of debonding along interfaces between the fibers and the matrix, which develops locally in the course of deformation in a continuously changing mix of modes. In Al alloy matrix composites reinforced with Al₂O₃ fibers an effective means of controlling the key interface fracture toughness is through coarsening of Al₂Cu intermetallic interface precipitates which prescribe a ductile fracture separation layer. A combined experimental approach and micromechanical modeling, utilizing a specially tailored novel tension/shear: traction/separation law provides the means for further optimization of overall behavior. This revised version was published online in July 2006 with corrections to the Cover Date.     

A clinicopathologic study of mucinous gastric carcinoma including multivariate analysis

BACKGROUND: Mucinous gastric carcinoma (MGC) is a rare subtype of gastric adenocarcinoma, and its clinical and pathologic features are still controversial. To clarify the significance of this subtype of carcinoma, the authors conducted a case-control study to investigate the clinicopathologic characteristics of MGC and determine whether this mucin-producing histologic type is associated with a worse prognosis than other gastric carcinomas. METHODS: Twenty-two cases of MGC and 46 patients with nonmucinous gastric carcinoma (NGC) were included. Patients were evaluated on the basis of age, gender, tumor size, location, depth of tumor invasion, histologic differentiation, lymph node involvement, organ metastasis, stage at presentation, surgical curability, adjuvant chemotherapy and radiation therapy. To determine whether the MGC itself was an independent prognostic factor, a multivariate analysis was performed with the Cox proportional hazards model. RESULTS: The MGC patients were found to have larger tumors (P < 0.001), tumors more often located in the upper stomach (P < 0.05), more serosal invasion (P < 0.05), more lymph node involvement (P < 0.05), greater frequency of advanced stage disease (P < 0.01), and lower 5-year survival rates (P < 0.05) than NGC patients. There was no significant correlation between the subtypes of differentiation of MGC and other data, including the prognosis. Multivariate analysis showed that clinically important predictive factors were serosal invasion and disease stage at diagnosis. The mucinous histologic type itself was not an independent factor for poor prognosis. CONCLUSIONS: The overall survival rate for patients with MGC was worse than that for patients with NGC. The poor prognosis was correlated with more advanced stage at diagnosis and more frequent serosal invasion, not with the mucinous histologic type.     

Interactions between arginine-rich histones and deoxyribonucleic acids. II. Circular dichroism

Circular dichroism (CD) was used to investigate the conformations of arginine-rich histones, H3 (III or f3) and H4 (IV or f2a1), and DNA in the complexes prepared by four different methods: (A) NaCl gradient dialysis with urea; (B) NaCl gradient dialysis without urea; (C) direct mixing in 2.5 x 10(-4) M EDTA, pH 8.0; and (D) direct mixing in 0.01 M sodium phosphate, pH 7.0. Using the CD spectrum of native chromatin as a criterion to judge the closeness of a complex to its native state, it was observed that a complex made by direct mixing at low ionic strength (methods C and D) is better than the ones made by NaCl gradient dialysis with or without urea (methods A and B). It is explained as a result of lack of ordered secondary structures in histones due to the presence of urea in method A or due to nonspecific aggregation in NaCl without urea (method B). Compared with all the earlier reports in literature on the CD of histone-DNA complexes, the CD spectra of arginine-rich histone-DNA complexes prepared by methods C and D are closest to that of native chromatin both in shape and in amplitude. These results imply (a) that arginine-rich histones play an important role in maintaining the conformation of chromatin and (b) that the binding of these two histones to DNA prepared by methods C and D are close to that in native chromatin. Noticeable variation in conformation of free and bound histone and histone-bound DNA has also been observed in histone H3 with one or two cysteine residues, and in reduced or oxidized state even when the complexes were prepared and examined in the same condition. CD spectra of arginine-rich histones in 0.01 M phosphates, pH 7.0, indicate the presence of alpha-helix which could be responsible for a favorable binding of the less basic regions of these histones to DNA under this condition as demonstrated by thermal denaturation (Yu, S. .S, Li H. J., and Shih, T. Y. (1976), Bio-chemistry, the preceding paper in this issue). To preserve or generate alpha-helical structures in histones seems to be a critical step in reconstituting good histone-DNA complexes.     

Evaluation of the impact of fuel hydrocarbons and oxygenates on groundwater resources

The environmental behavior of fuel oxygenates (other than methyl tert-butyl ether [MTBE]) is poorly understood because few data have been systematically collected and analyzed. This study evaluated the potential for groundwater resource contamination by fuel hydrocarbons (FHCs) and oxygenates (e.g., tert-butyl alcohol [TBA], tertamyl methyl ether [TAME], diisopropyl ether [DIPE], ethyl tert-butyl ether [ETBE], and MTBE) by examining their occurrence, distribution, and spatial extent in groundwater beneath leaking underground fuel tank (LUFT) facilities, focusing on data collected from over 7200 monitoring wells in 868 LUFT sites from the greater Los Angeles, CA, region. Excluding the composite measure total petroleum hydrocarbons as gasoline (TPHG), TBA has the greatestsite maximum (geometric mean) groundwater concentration among the study analytes; therefore, its presence needs to be confirmed at LUFT sites so that specific cleanup strategies can be developed. The alternative ether oxygenates (DIPE, TAME, and ETBE) are less likely to be detected in groundwater beneath LUFT facilities in the area of California studied and when detected are present at lower dissolved concentrations than MTBE, benzene, or TBA. Groundwater plume length was used as an initial indicator of the threat of contamination to drinking water resources. Approximately 500 LUFT sites were randomly selected and analyzed. The results demonstrate MTBE to pose the greatest problem, followed by TBA and benzene. The alternative ether oxygenates were relatively localized and indicated lesser potential for groundwater resource contamination. However, all indications suggest the alternative ether oxygenates would pose groundwater contamination threats similar to MTBE if their scale of usage is expanded. Plume length data suggest that in the absence of a completely new design and construction of the underground storage tank (UST) system, an effective management strategy may involve placing greater emphasis on UST program for ensuring adequate enforcement and compliance with existing UST regulations.     

Dissolution rates of limestones of different sources

The dissolution characteristics of limestones from six sources in Taiwan have been studied by using the pH-stat method in a stirred tank at 60 degrees C, pH values of 4 and 6, stirrer speeds of 500-1000 rpm, and a particle size of 75-125 microm aperture width. The dissolution rates of the limestones were found to be controlled by the mass transfer of hydrogen ions with chemical reactions in the liquid film surrounding the limestone particle. The measured value of mass transfer coefficient increases with an increasing pH value and stirrer speed and remains constant with particle size. For the six limestones at the same particle size, the measured dissolution rates per unit area are the same due to the mass-transfer control kinetics; however, the time taken to reach a certain fraction of dissolution is proportional to the molar concentration of the soluble species in the limestone and the initial particle size.     

An investigation of surface state capture cross-sections for metal–oxide–semiconductor field-effect transistors using HfO2 gate dielectrics

MOSFETs and MOSCs incorporating HfO₂ gate dielectrics were fabricated. The I_DS–V_DS, I_DS–V_GS, gated-diode and C–V characteristics were investigated. The subthreshold swing and the interface trap density were obtained. The surface recombination velocity and the minority carrier lifetime in the field-induced depletion region measured from the gated diodes were about 2.73 × 10³ cm/s and 1.63 × 10⁻⁶ s, respectively. The effective capture cross section of surface state was determined to be 1.6 × 10⁻¹⁵ cm² using the gated-diode technique in comparison with the subthreshold swing measurement. A comparison with conventional MOSFETs using SiO₂ gate oxide was also made.     

Background removal of multiview images by learning shape priors.

Image-based rendering has been successfully used to display 3-D objects for many applications. A well-known example is the object movie, which is an image-based 3-D object composed of a collection of 2-D images taken from many different viewpoints of a 3-D object. In order to integrate image-based 3-D objects into a chosen scene (e.g., a panorama), one has to meet a hard challenge--to efficiently and effectively remove the background from the foreground object. This problem is referred to as multiview images (MVIs) segmentation. Another task requires MVI segmentation is image-based 3-D reconstruction using multiview images. In this paper, we propose a new method for segmenting MVI, which integrates some useful algorithms, including the well-known graph-cut image segmentation and volumetric graph-cut. The main idea is to incorporate the shape prior into the image segmentation process. The shape prior introduced into every image of the MVI is extracted from the 3-D model reconstructed by using the volumetric graph cuts algorithm. Here, the constraint obtained from the discrete medial axis is adopted to improve the reconstruction algorithm. The proposed MVI segmentation process requires only a small amount of user intervention, which is to select a subset of acceptable segmentations of the MVI after the initial segmentation process. According to our experiments, the proposed method can provide not only good MVI segmentation, but also provide acceptable 3-D reconstructed models for certain less-demanding applications.     

Adaptive exception monitoring agents for management by exceptions

Management by exceptions (MBE) is an effective management strategy in many domains. It suggests that managers focus on important jobs (e.g., planning and decision-making) without being involved in the tedious monitoring of exceptions (e.g., a critical item whose current status violates some regulations). Once an exception is detected, the managers are notified to respond to the exception promptly. Therefore, exception monitoring is the key to realize the idea of MBE. An exception monitoring system should detect exceptions in a timely manner for the managers. It should also control the extra loading it incurs to related information servers (e.g., database management systems) and the Intranet, which are fundamental backbones for information processing in businesses. In this paper, a multiagent paradigm Adaptive Agents for Management by Exceptions (AAMBE) is proposed for exception monitoring. The agents adapt to the environment by learning to work together to achieve timely detection of exceptions. An experiment to investigate the performance of AAMBE is conducted by simulating real-world operations of financial management in merchandising trades. Empirical and theoretical analyses show that AAMBE may detect more exceptions in a timelier manner by incurring less extra loading to the related information servers and the Intranet.     

Silver (Ag) as a novel masking material in glass etching for microfluidics applications

In this paper, we report the use of a single masking film for deep glass etching in hydrofluoric acid (HF). Thin film silver (Ag) is the key masking material in this work enabling a simple and low cost fabrication of microfluidic structures. The Ag film was deposited by evaporation and etched in a diluted nitric acid and de-ionized water solution at a ratio of 1:3. Surface morphology for different thicknesses of Ag film and its correlation to the maximum achievable etch depth is analyzed. AFM results shows low roughness values (<5 nm), indicating the Ag films are of smooth surface. With a 100 nm Ag film, a 220 μm etch depth in borosilicate glass substrates were produced and by further thickening the Ag to 300 nm, etch depths exceeding 300 μm were successfully achieved. SEM images show that thinner Ag films are of finer grains, potentially a source for pinholes formation where rapid penetration of HF along the grain boundaries peels off the Ag film from the glass surface. However, the Ag film was found not to react with HF. The process was demonstrated in the fabrication of cavities for integration with other microfluidic devices.