Flow distribution in spiral mandrel dies

An analysis of flow of a power law fluid in a spiral mandrel die is presented. The analysis is applied to study the effect of various die design parameters on the flow distribution at the end of the spiral mandrel section. Three variables that have a very strong effect on the flow distribution are the number of grooves, the initial clearance, and the groove helix angle. The distribution is improved by increasing the number of grooves, by using a non-zero initial clearance, and a relatively small helix angle. Two more variables that have a significant effect on the flow distribution are the taper angle and the initial groove depth. The optimum taper angle was found to be between 1 and 3 degrees. The distribution uniformity improves with the initial groove depth, while the pressure drop reduces at the same time.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

DYNAMIC TENSIONS IN FINITE OIL DROPLETS

In reacting systems, dynamic interfacial tension (IFT) values above 10-20 mN/m are often encountered. For such high tension values, infinitely long oil droplets will not be realised in spinning drop tensiometry. Hence, Vonnegut's solution will not be strictly valid. The experimentalist is then compelled to use one of the several alternative solution schemes proposed in the literature. We have obtained dynamic IFT data for 0.3125 mM oleic acid in hexadecane contacted with various NaOH solutions by the use of a novel experimental scheme called photo-micropendography. These tension values were then compared with spinning drop tensiometer data calculated by using three alternative solution schemes, namely, Vonnegut's method, the formula of Slattery and Chen and the analysis of Princen el al. The comparison showed that when the droplet's length/width ratio was below 2.5, Vonnegut's formula was severely in error. The solution scheme proposed by Slattery and Chen gave tension values close to those found by photo-micropendography over the entire range of IFT values exhibited by the oleic acid/caustic systems. However, the most consistent and reasonably accurate tension values resulted from the use of Table I in the paper by Princen, Zia and Mason. A simplified computer algorithm has been proposed for calculating dynamic interfacial tensions using the formulas and tables proposed by the latter authors. However, at length/width ratios above 2.5, the agreement between interfacial tensions determined by micropendography and spinning drop data calculated by the use of Vonnegut's solution was quite good.     

Subsoil <Superscript>15</Superscript>N-N<Subscript>2</Subscript>O Concentrations in a Sandy Soil Profile After Application of <Superscript>15</Superscript>N-fertilizer

Studies on emissions of nitrous oxide (N₂O) from agricultural soils mostly focus on fluxes between the soil and the atmosphere or are limited to the atmosphere in the topsoil. However, in soils with shallow water tables, significant N₂O formation may occur closer to the groundwater. The aims of this study were (i) to determine the importance of subsoil N₂O formation in a sandy soil; and (ii) to obtain a quantitative insight in the contribution of subsoil N₂O to the overall losses of N₂O to the environment. We applied ¹⁵N labeled fertilizer at a rate of 5.22 kg ¹⁵N ha⁻¹; 50% as Ca(NO₃)₂ and 50% as NH₄Cl, on a mesic typic Haplaquod seeded with potatoes (Solanum tuberosum L.), and traced soil N₂O concentrations and fluxes over a one-year period. Throughout the year, total N₂O and the amount of ¹⁵N recovered in soil N₂O were highest in the subsoil, with a maximum concentration at 48 cm depth in mid-February of 19900 μl m⁻³ and 24 μg ¹⁵N m⁻³, respectively. The maximum concentration coincided with the highest water-filled pore space of 71%. The cumulative flux of N₂O was 446 g N₂O-N ha⁻¹, the recovery of ¹⁵N in this flux was 0.06%. During the summer, maximum fluxes followed high soil N₂O concentrations. During winter, no such relation was found. We concluded that the formation of N₂O was the highest in the subsoil, largely controlled by water-filled pore space rather than NO₃⁻ concentration or temperature. Although high subsoil N₂O concentrations did not lead to high surface fluxes of N₂O in the winter, artificial draining may lead to high indirect N₂O emissions through supersaturated drainage water.     

Assessing the reliability of ordered categorical scales using kappa-type statistics

Methods for the analysis of reliability of ordered categorical scales are discussed, focussing on the limitation of the single summary-weighted kappa coefficients. A symmetric matrix of kappa-type coefficients is suggested as an alternative. The method is proposed as being suitable for ordinal scale where there is no underlying continuum. Their application is illustrated using two data sets from reliability studies. If, instead, distances between categories can be specified, a weighted mean of the matrix terms can be used as a summary measure. This is equal to a weighted kappa coefficient with squared weights, provided distances between adjacent categories are equal. When a study design corresponds to a one-way random effects model, estimates of precision of kappa-type coefficient, including the coefficients described here, can be obtained using the delta-method, bootstrap resampling by subjects or jack-knifing by subjects. In the case of interobserver reliability studies, where there may be systematic differences between observers, the investigator may wish to generalise to a population of observers and subjects. In this case, jack-knifing by observer and subject is suggested. Empirical comparisons are made between standard error estimates based on the delta-method, on jack-knifing by subjects and a two-way jack-knife by subjects and observers. The results suggest that standard errors based on the delta-method or jack-knifing by subject alone may be overly precise.     

Influence of habitat heterogeneity and bed surface complexity on benthic invertebrate diversity in a gravel‐bed river

Maintaining or restoring physical habitat diversity is a central tenet of sustainable river management, yet a link between habitat and ecological diversity in fluvial systems has long remained equivocal. The lack of consistent evidence partly reflects the problems of characterizing habitat in ways that are ecologically meaningful. This paper assesses the influence of habitat heterogeneity and complexity on macroinvertebrate assemblages in a mountain gravel‐bed river. With the use of 0.1‐m resolution data obtained from an acoustic Doppler current profiler, heterogeneity and complexity in hydraulic conditions and bed topography were characterized using 13 metrics applied to 30 areas, each 1 m², with an invertebrate sample collected from each area. Turnover of invertebrate taxa (i.e., β‐diversity) between sampled areas was rather limited, but observed differences in diversity were related significantly to several metrics of habitat heterogeneity. Invertebrate abundance was related to habitat diversity, patch size coefficient of variation, and patch size, whereas the Shannon diversity was related to the number of patches and patch size. None of the habitat complexity metrics accounted for a significant amount of observed variation in invertebrate communities between sampled areas. The paper demonstrates that high‐resolution data can help reveal relationships between habitat and benthic invertebrate diversity.     

“危机，什么危机？”

8月中旬当美国大型投资机构Sentinel停止投资者抽离资金时，它的理由是市场出现了“恐慌”。毫无疑问：近日全球市场剧烈震荡，导致金融界某些领域的危机感日益加剧。[第一段]     

Competence management in knowledge intensive organizations using consensual knowledge and ontologies

This article describes an architecture suitable for use in a competence management system for knowledge intensive organizations (KIOs). The underlying motivation for this work is to explore the practical problems of the use of codified knowledge in knowledge management systems (KMS) in KIOs. We explore some of the key issues associated with the use of tacit and codified knowledge in KMS, and describe an architecture based on an ontology-driven framework derived from collective and consensual knowledge that acts as a structure for a formal knowledge base. We describe, in outline, a prototype competence management system based on this architecture designed to support the management of competencies in a structured way. We conclude with some observations about our approach to the representation of knowledge in a KMS and its potential value to KIOs.     

The Cost of Environmental Constraints in Traffic Networks: Assessing the Loss of Optimality

Increasing numbers of hard environmental constraints are being imposed in urban traffic networks by authorities in an attempt to mitigate pollution caused by traffic. However, it is not trivial for authorities to assess the cost of imposing such hard environmental constraints. This leads to difficulties when setting the constraining values as well as implementing effective control measures. For that reason, quantifying the cost of imposing hard environmental constraints for a certain network becomes crucial. This paper first indicates that for a given network, such cost is not only related to the attribution of environmental constraints but also related to the considered control measures. Next, we present an assessment criterion that quantifies the loss of optimality under the control measures considered by introducing the environmental constraints. The criterion can be acquired by solving a bi-level programming problem with/without environmental constraints. A simple case study shows its practicability as well as the differences between this framework and other frameworks integrating the environmental aspects. This proposed framework is widely applicable when assessing the interaction of traffic and its environmental aspects.