Arsenic Diffusion Study in HgCdTe for Low <Emphasis Type="Italic">p</Emphasis>-Type Doping in Auger-Suppressed Photodiodes

Controllable p-type doping at low concentrations is desired for multilayer HgCdTe samples in a P ⁺/π/N ⁺ structure due to the promise of suppressing Auger processes, and ultimately reduced dark current for infrared detectors operating at a given temperature. In this study, a series of arsenic implantation and annealing experiments have been conducted to study diffusion at low Hg partial pressure with the goal of achieving effective control over dopant profiles at low concentration. Arsenic dopant profiles were measured by secondary ion mass spectroscopy (SIMS), where diffusion coefficients were extracted with values ranging between 3.35 × 10⁻¹⁶ cm² s⁻¹ and 6 × 10⁻¹⁴ cm² s⁻¹. Arsenic diffusion coefficients were found to vary strongly with Hg partial pressure and HgCdTe alloy composition, corresponding to variations in Hg vacancy concentration.     

用可编程逻辑创建专用微控制器

微控制器是最原始的芯片系统（SoC)器件，在最近几年，FPGA和PLD厂商提出了“可编程芯片系统”（SOPC）的概念，用可编程逻辑来设计专用硬件如微控制器。创建专用微控制器的要素包括全功能的32位RISC微处理器、现成的外设以及可选的专用外设、IP的各种开发工具。这些要素都是现在的，再结合低成本的可编程器件（PLD），设计者就可以为现有的微控制器增加各种功能。本文讨论设计者在PLD设计专用微控制器时的问题，列举的设计实例包括用户定义的硬件加速专用指令和外设。     

Assessing the performance of crack detection tests for solder joints

This paper presents both modelling and experimental test data to characterise the performance of four non-destructive tests. The focus is on determining the presence and rough magnitude of thermal fatigue cracks within the solder joints for a surface mount resistor on a strip of FR4 PCB. The tests all operate by applying mechanical loads to the PCB and monitoring the strain response at the top of the resistor. The modelling results show that of the four tests investigated, three are sensitive to the presence of a crack in the joint and its magnitude. Hence these tests show promise in being able to detect cracking caused by accelerated testing. The experimental data supports these results although more validation is required.     

Perceptually lossless medical image coding

A novel perceptually lossless coder is presented for the compression of medical images. Built on the JPEG 2000 coding framework, the heart of the proposed coder is a visual pruning function, embedded with an advanced human vision model to identify and to remove visually insignificant/irrelevant information. The proposed coder offers the advantages of simplicity and modularity with bit-stream compliance. Current results have shown superior compression ratio gains over that of its information lossless counterparts without any visible distortion. In addition, a case study consisting of 31 medical experts has shown that no perceivable difference of statistical significance exists between the original images and the images compressed by the proposed coder.     

Managing dynamic automated communities with MPLS-based VPNs

This paper describes a novel architecture for supporting orchestrated distributed computing and other forms of dynamic communities that can benefit from on-demand access to processing and communications resources. This effectively provides a mechanism that allows network operators to sell communication and resource management services rather than ‘connections’. It offers a cost-effective solution, for example, for SMEs or other end users, who can delegate some backoffice processing to the operator. We show that this system is achievable by extending 21CN functionalities. The operator is no longer seen as simply providing infrastructure, but also generic services upon that infrastructure. A key feature of the approach is to capitalise on MPLS technology, enabling specific quality of service requirements to be accommodated. This communications infrastructure is used to support on-demand operations, coupling end users with resources owned by the network operator or third party providers. Furthermore, given the importance of security, the paper considers VPN-specific security issues.     

Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels

This paper describes the mechanistic details of an electrochemical method to control the withdrawal of a liquid metal alloy, eutectic gallium indium (EGaIn), from microfluidic channels. EGaIn is one of several alloys of gallium that are liquid at room temperature and form a thin (nm scale) surface oxide that stabilizes the shape of the metal in microchannels. Applying a reductive potential to the metal removes the oxide in the presence of electrolyte and induces capillary behavior; we call this behavior “recapillarity” because of the importance of electrochemical reduction to the process. Recapillarity can repeatably toggle on and off capillary behavior by applying voltage, which is useful for controlling the withdrawal of metal from microchannels. This paper explores the mechanism of withdrawal and identifies the applied current as the key factor dictating the withdrawal velocity. Experimental observations suggest that this current may be necessary to reduce the oxide on the leading interface of the metal as well as the oxide sandwiched between the wall of the microchannel and the bulk liquid metal. The ability to control the shape and position of a metal using an applied voltage may prove useful for shape reconfigurable electronics, optics, transient circuits, and microfluidic components.     

Ultra-Low-Power Interface Chip for Autonomous Capacitive Sensor Systems

Traditionally, most of the sensor interfaces must be tailored towards a specific application. This approach results in a high recurrent design cost and time to market. On the other hand, generic sensor interface design reduces the costs and offers a handy solution for multisensor applications. This paper presents a generic sensor interface chip (GSIC), which can read out a broad range of capacitive sensors. It contains capacitance-to-voltage converters, a switched-capacitor amplifier, an analog-to-digital converter, oscillators, clock generation circuits and a reference circuit. The system combines a very low-power design with a smart energy management, which adapts the current consumption according to the accuracy and speed requirements of the application. The GSIC is used in a pressure and an acceleration monitoring system. The pressure monitoring system achieves a current drain of 2.3 muA for a 10-Hz sample frequency and an 8-bit accuracy. In the acceleration monitoring system, we measured a current of 3.3 muA for a sample frequency of 10 Hz and an accuracy of 9 bits     

Experimental measure of dynamic spatial-hole burning in DFB lasers

Spatially resolved measurements of carrier density in two 1.3-μm distributed feedback laser diodes are reported. By measuring the response of the spontaneous emission intensity to a 50-MHz drive current, small relative changes in the carrier density can be observed. When biased below threshold, the carrier density fluctuates uniformly in the laser cavity with a phase delay corresponding to the carrier lifetime. When biased above threshold, the carrier density response shows clear evidence of spatial hole burning. The location of the minimum and the net change in carrier density, however, depend on the particular laser     

Single‐Step Deposition of Au‐ and Pt‐Nanoparticle‐Functionalized Tungsten Oxide Nanoneedles Synthesized Via Aerosol‐Assisted CVD,and Used for Fabrication of Selective Gas Microsensor Arrays

Tungsten oxide nanostructures functionalized with gold or platinum NPs are synthesized and integrated, using a single‐step method via aerosol‐assisted chemical vapour deposition, onto micro‐electromechanical system (MEMS)‐based gas‐sensor platforms. This co‐deposition method is demonstrated to be an effective route to incorporate metal nanoparticles (NP) or combinations of metal NPs into nanostructured materials, resulting in an attractive way of tuning functionality in metal oxides (MOX). The results show variations in electronic and sensing properties of tungsten oxide according to the metal NPs introduced, which are used to discriminate effectively analytes (C₂H₅OH, H₂, and CO) that are present in proton‐exchange fuel cells. Improved sensing characteristics, in particular to H₂, are observed at 250 °C with Pt‐functionalized tungsten oxide films, whereas non‐functionalized tungsten oxide films show responses to low concentrations of CO at low temperatures. Differences in the sensing characteristics of these films are attributed to the different reactivities of metal NPs (Au and Pt), and to the degree of electronic interaction at the MOX/metal NP interface. The method presented in this work has advantages over other methods of integrating nanomaterials and devices, of having fewer processing steps, relatively low processing temperature, and no requirement for substrate pre‐treatment.