SCR operation mode of diode strings for ESD protection

Diodes and diode strings in 90 nm and beyond technologies are investigated by measurement and device simulation. After a thorough calibration, the device simulator is utilised to achieve a better understanding and an enhanced device performance of diode strings under static and transient ESD conditions. Thereto, parasitic transistors and a so far neglected parasitic thyristor (SCR) in the diode string are regarded, exploited and optimised.     

Deployment of RSS-Based Indoor Positioning Systems

Location estimation based on Received Signal Strength (RSS) is the prevalent method in indoor positioning. For such positioning systems, a massive collection of training samples is needed for their calibration. The accuracy of these methods is directly related to the placement of the reference points and the radio map used to compute the device location. Traditionally, deploying the reference points and building the radio map require human intervention and are extremely time-consuming. In this paper we present an approach to reduce the manual calibration efforts needed to deploy an RSS-based localization system, both when using only one RF technology or when using a combination of RF technologies. It is an automatic approach both to build a radio map in a given workspace by means of a signal propagation model, and to assess the system calibration that best fits the required accuracy by using a multi-objective genetic algorithm.     

Quadrature Amplitude Modulation for Differential Space-Time Block Codes

Differential Space-Time Block Codes (DSTBC) do not require any radio channel measurement and channel state information neither on the transmitter nor at the receiver side. Therefore, they are an attractive alternative to coherent Multiple-Input Multiple-output (MIMO) systems. The classical technical proposal for differential techniques is based on M-ary phase shift keying (M-PSK) modulation schemes for DSTBC (PSK-DSTBC). One advantage of this scheme is the constant envelop of the transmit signal, but it is well known that higher-order PSK is less efficient due to the small distance between adjacent points in the constellation diagram. Therefore, in this paper an alternative modulation technique for DSTBC is discussed, which is based on quadrature amplitude modulation (QAM-DSTBC). The signal envelope of the transmit signal is not any more constant in this case. Therefore, the technical challenge of integrating QAM into the DSTBC system design is to control the transmit power in order to avoid an increase or a decrease in transmit power to some extreme values. The mechanism, which is used in this paper to control the transmit power is based on an extension of the original QAM constellation diagram. The additional points, which are integrated into the constellation diagram are used in this case for the mapping procedure to select one of the modulation symbols with high or alternatively low signal power. This means for each single bit pattern there are almost always two modulation symbols available in the mapping procedure one with low and one with high signal power, which gives the basis for a signal power control algorithm. The resulting bit-error-rate (BER) performance of QAM-DSTBC is compared finally to the performance figures of the original proposal of PSK-DSTBC.

Recent Advances in Birefringence Studies at THz Frequencies

In the last few years, various studies on terahertz (THz) birefringence have been presented, based on polarization-sensitive THz time-domain spectroscopy. The field of THz birefringence is a wide one covering several aspects, such as different materials exhibiting THz birefringence, polarization-sensitive THz technology, as well as numerous methods for extracting the birefringence properties of a sample from the THz data. Therefore, this paper aims at reviewing recent results on THz birefringence measurements presented in literature, addressing the above aspects and giving an overview of the topic. Moreover, it will focus on the investigation of birefringent fibrous samples, where specific results will be discussed in detail. Altogether, this paper should give a comprehensive view on the recent achievements in the measurements of THz birefringence.     

Preparation of Ring-Shaped Thermoelectric Legs from PbTe Powders for Tubular Thermoelectric Modules

Waste heat recovery—for example, in automotive applications—is a major field for thermoelectric research and future application. Commercially available thermoelectric modules are based on planar structures, whereas tubular modules may have advantages for integration and performance in the field of automotive waste heat recovery. One major drawback of tubular generator designs is the necessity for ring-shaped legs made from thermoelectric material. Cutting these geometries from sintered tablets leads to considerable loss of thermoelectric material and therefore high cost. Direct sintering of ring-shaped legs or tubes of thermoelectric material is a solution to this problem. However, sintering such rings with high homogeneity and density faces some difficulties related to the mechanical properties of typical thermoelectric materials such as lead telluride (PbTe)—particularly brittleness and high coefficient of thermal expansion. This work shows a process for production of thermoelectric rings made of p- and n-doped PbTe. Long tubes of PbTe have been sintered in a current-assisted sintering process with specially designed sintering molds, coated with a diffusion barrier, and finally cut into ring-shaped slices. To demonstrate the technology, a tubular thermoelectric module has been assembled using these PbTe rings.     

Un nouveau matériau pour le multiplexage holographique sur réseau de fibres optiques

Frequency multiplexing, using gratings, in optical fiber systems is now well known. The potentials of holography have already been validated for this kind of application. However, the silver halide photosensitive materials limited the diffraction efficiency and also the achievable angular discrimination. The material we have developed, called optrigelac, is a gelatin doped with ammonium dichromate. This material allows high diffraction efficiencies, up to the theoretical limit of 100 %, with low noise and adjustable angular and wavelength selectivity. The coating, sensitizing and development procedures, and a model relating the final hologram properties to a practical working procedure are described.     

Fracture mechanical analysis of strengthened concrete tension members with one crack

A concrete tension member strengthened with fiber reinforced polymer plates on two sides is analyzed with non-linear fracture mechanics. The analysis of the strengthened tension member incorporates cohesive properties for both concrete and interface between concrete and strengthening medium, and results in closed form solutions for the load-crack opening relationship. To distinguish between single and multiple cracking in a design process, structural classification parameters are derived. The minimum reinforcement ratio for obtaining multiple cracking derived from the structural classification parameters, is investigated in a non-dimensional analysis, and found to depend strongly on the ratio between interfacial and concrete fracture energies.     

An investigation of Interface-GMRES(R) for fluid–structure interaction problems with flutter and divergence

The basic subiteration method for solving fluid–structure interaction problems consists of an iterative process in which the fluid and structure subsystems are alternatingly solved, subject to complementary partitions of the interface conditions. The main advantages of the subiteration method are its conceptual simplicity and its modularity. The method has several deficiencies, however, including a lack of robustness and efficiency. To bypass these deficiencies while retaining the main advantages of the method, we recently proposed the Interface-GMRES(R) solution method, which is based on the combination of subiteration with a Newton–Krylov approach, in which the Krylov space is restricted to the interface degrees-of-freedom. In the present work, we investigate the properties of the Interface-GMRES(R) method for two distinct fluid–structure interaction problems with parameter-dependent stability behaviour, viz., the beam problem and the string problem. The results demonstrate the efficiency and robustness of the Interface-GMRES(R) method.     

Microstructure and Transformation Behavior of in-situ Shape Memory Alloys by Selective Laser Melting Ti-Ni Mixed Powder

The selective laser melting(SLM) of Ti-Ni mixed powder with atomic ratio of 1:1 was performed in the present work in order to elaborate shape memory alloy(SMA).The martensite phase of Ti-Ni alloy can be found by X-ray diffraction(XRD) analysis under temperature field,moreover,the Ti2Ni phase at a high scanning velocity.The crystalline phase images also show that the synthesized Ti-Ni alloy possessed a refined martensite microstructure.In order to evaluate the mechanical properties,the microhardness and porosity were measured.The microhardness is relatively high about 400HV0.2 with champ temperature.Besides,the porosity is quite low due to the excellent laser energy absorptivity and meltability of Ni element.The differential scanning calorimetry(DSC) analysis shows that the transformation temperature from austenite phase to martensite phase is relatively high and stable.