Magnetic Properties of Thermal Sprayed Tungsten Carbide–Cobalt Coatings

In the information age, the storage and accessibility of data is of vital importance. There are several possibilities to fulfill this task. Magnetic storage of data is a well‐established method and the range of materials used is continuously extended. In this study, the magnetic remanence of thermally sprayed tungsten carbide–cobalt (WCCo)‐coatings in dependence of their thickness is examined. Two magnetic fields differing in value and geometry are imprinted into the coatings and the resulting remanence field is measured. It is found that there are two effects, which in combination determine the effective value of the magnetic remanence usable for magnetic data storage.

     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.     

An Approach to Synthesize Thick α- and γ-Al2O3 Coatings by High-Speed Physical Vapor Deposition

Crystalline α- and γ-Al₂O₃ exhibit in many applications high wear resistance, chemical resistance, and hot hardness, making them interesting materials for production engineering. To synthesize α-Al₂O₃ with high coating thickness of s ≥ 10 μm, chemical vapor deposition at temperatures T > 1000 °C is well established. However, there are almost no studies dealing with the synthesis of thick α-Al₂O₃ by physical vapor deposition (PVD) at high temperatures T > 700 °C. High-temperature deposition of thick coatings can be realized by means of the dense hollow cathode plasma, combined with the transport function of the plasma gas in high-speed (HS) PVD. Herein, crystalline α- and γ-Al₂O₃ films are deposited on cemented carbides at substrate temperatures T _s ≈ 570 °C and T _s ≈ 780 °C by HS-PVD. These coatings exhibit a thickness up to s = 20 μm. Moreover, phase analysis presents α-phases in coatings synthesized at substrate temperature of T _s ≈ 780 °C with significant higher hardness than films by T _s ≈ 570 °C. These release the potential of HS-PVD to synthesize α-Al₂O₃ coatings with high thickness. Thereby, a higher thickness of these coatings is beneficial for the wear protection of turning and die casting tools.     

Additive Manufacturing of Hard Magnetic Passive Shims to Increase Field Homogeneity of a Halbach Magnet

Obtaining a highly homogeneous magnetic field is desired for field-controlled applications. For example, the resolution of magnetic analysis methods can be improved by generating a stronger and more homogeneous field over the region of interest (ROI). A set of 3D-printed passive shims is fabricated using additive manufacturing to improve the magnetic field homogeneity of a Halbach magnet assembly. The feedstock is a custom acrylonitrile butadiene styrene (ABS)-hard magnet composite filament filled with 60% wt. isotropic NdFeB. Additionally, a method for investigating the remanence is developed and validated. The result reveals a good agreement between the new method and existing measurement techniques for the remanence of permanent magnets. It is also shown that the additive manufacturing procedure has negligible effects on the magnetic properties. Performing a parametric study over a rectangular ROI, an optimized shim configuration is achieved. In the optimized and 3D-printed configuration, the average norm of the magnetic flux density, B_norm, is increased by 13% and, more importantly, a 43% increase in the magnetic uniformity is obtained. These results highlight the great potential of freeform manufacturing, namely, additive manufacturing, to tailor the properties of magnet structures.     

Ultralow Expansion Glass as Material for Advanced Micromechanical Systems

Ultralow expansion (ULE) glasses are of special interest for temperature stabilized systems for example in precision metrology. Nowadays, ULE materials are mainly used in macroscopic and less in micromechanical systems. Reasons for this are a lack of technologies for parallel fabricating high-quality released microstructures with a high accuracy. As a result, there is a high demand in transferring these materials into miniaturized application examples, realistic system modeling, and the investigation of microscopic material properties. Herein, a technological base for fabricating released micromechanical structures and systems with a structure height above 100 μm in ULE 7972 glass is established. Herein, the main fabrication parameters that are important for the system design and contribute thus to the introduction of titanium silicate as material for glass-based micromechanical systems are discussed. To study the mechanical properties in combination with respective simulation models, microcantilevers are used as basic mechanical elements to evaluate technological parameters and other impact factors. The implemented models allow to predict the micromechanical system properties with a deviation of only ±5% and can thus effectively support the micromechanical system design in an early stage of development.     

3D-Druck für Hochvakuumanwendungen

To mark our anniversary, we are presenting articles that have been particularly appreciated by readers of our online edition once again in print. Here: 3D-Printing for High Vacuum Applications 3D printing technology has made the leap from a home-based private practice to industrial manufacturing. Due to the increasing reliability of printers and increasing material diversity, especially in the metal sector, double-digit percentage growth rates are possible in the coming years. This thesis deals with the manufacture of parts made by 3D printing for high vacuum application. Different components are printed and examined for their vacuum compatibility. As shown furthermore, conventionally made standard components can be vacuum sealed to printed parts, which enables cost-effective production of more complex components, such as e.g. a vacuum chamber allows. In addition, functional components can already be realized in the manufacturing process. The integration of a system of flow channels directly into the wall of a chamber is just one example. Thus, such a chamber can be heated during evacuation and effectively cool in later operation.     

High-resolution venography of the brain using magnetic resonance imaging

The purpose of this study was to evaluate a non-flow related magnetic resonance imaging method to visualize small veins independent of arteries in the human brain. A long TE, high-resolution 3D gradient echo MR acquisition was used to highlight venous information. The method is based on the paramagnetic property of deoxyhemoglobin and the resulting phase difference between veins and brain parenchyma at long echo times. The MR magnitude images were masked with a phase mask filter to enhance small structure visibility.. Venous information down to sub-pixel vessel diameters of several hundred microns is visible. Venous data are displayed in an angiographic manner using a minimum intensity projection algorithm. Both superficial veins and deep white matter veins are visible. The method has been successfully applied in volunteers. Preliminary results in patients with cerebral arteriovenous malformations indicate its potential in clinical applications. The proposed method is easy to implement and does not require administration of a contrast agent or application of specially designed rf pulses to highlight the veins. Rather it exploits the intrinsic magnetic properties (BOLD-effect) and the prolonged T ^_2* of venous blood. The method may be of diagnostic potential in the assessment of arteriovenous malformations or other vascular venous lesions. © 1998 Elsevier Science B.V. All rights reserved.