ARMAX modelling of international tourism demand

Box–Jenkins (1970) models are often used to capture the autoregressive moving average of past observations of tourist arrivals from Japan to Taiwan and New Zealand. However, other explanatory variables, such as real income in the origin country, have also affected the demand for international travel. The purpose of this paper is to use the ARMAX model to investigate the dynamic relationship between tourism demand and real income of Japan, and to compare the findings with the single-equation model. Unit root tests and diagnostics are performed before estimating the income elasticity of travel demand by Japan for New Zealand and Taiwan based on seasonally unadjusted quarterly data for 1980(1) to 2004(2). The empirical results of the ARMAX model support the economic theory that the demand for international travel is positively related to income of the origin country.     

Active optimistic and distributed message logging for message‐passing applications

Message logging is an attractive solution to provide fault tolerance for message‐passing applications because it is more scalable than coordinated checkpointing. Sender‐based message logging is a well‐known optimization that allows the saving of message payload in the sender memory. Thus, only message reception events have to be logged reliably by using an event logger. This paper proposes solutions to further improve message logging protocol scalability. In existing works on message logging, the event logger has always been considered as a centralized process. We propose a distributed event logger that takes advantage of multi‐core processors that are to be executed in parallel with application processes, leveraging the volatile memory of the nodes to save events reliably. We also propose the combination of our distributed event logger and O2P, an active optimistic message logging protocol using a gossip‐based protocol to disseminate information on new stable events. Our distributed event logger and O2P are implemented in the Open MPI library. Our results show the following: (i) distributed event logging improves message logging protocol scalability and (ii) using O2P with a distributed event logger provides an efficient and scalable fault‐tolerant solution for message‐passing applications. Copyright © 2011 John Wiley & Sons, Ltd.     

A Novel Processing Route to Control Grain Growth in Submicrometer Alumina Compacts

A novel processing procedure for significantly suppressing grain growth in submicrometer alumina compacts has been developed and implemented with the intent of ultimately using the same processing route to control grain size in nanophase alumina compacts. In this study, partially sintered alumina pellets made from 0.5 µm starting powders are altered by the chemical infiltration of Si₃N₄. The control and infiltrated pellets are then heated to 1650°C for 4 h. The fully sintered pellets are approximately 97% dense. Suppressed grain growth is observed in the infiltrated pellets. The average grain size in the control pellets after densification is 4.2 and 1.2 µm in the infiltrated pellets. Depth of infiltration is measured using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Depending on the specific infiltration conditions used, the outer 15-50% of the infiltrated pellets exhibit a graded microstructure consisting of a region of abnormal grain growth and a region of suppressed grain growth. Abnormal grain growth is visible on the outer surfaces of the infiltrated pellets where a relatively high ratio of Si to N is present. Further into the pellet, after some depletion of the Si source gas has occurred, regions of suppressed grain growth are apparent. Based on these results, an infiltration profile is determined. A mathematical model is developed to describe the infiltration process and to determine optimal infiltration conditions. High-resolution electron microscopy (HREM), energy dispersive spectroscopy (EDS), electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS) are used to study the infiltrated samples.     

The process of Retirement Planning Scale (PRePS): Development and validation.

Although a substantial proportion of the western population is approaching retirement age, little is known about how they are preparing for the future. Much attention has been paid to the consumption of educational material and retirement wealth in the present literature, but the process of retirement planning has been ignored. S. L. Friedman and E. K. Scholnick's (1997) theoretical model provided the basis for a comprehensive measure of retirement planning. According to their process theory, individuals develop an understanding of the problem, set goals, make a decision to start preparing, and finally undertake the behaviors needed to fulfill their goals. Fifty-two items were developed to assess each stage of the planning process for financial, health, lifestyle, and psychosocial retirement planning. These were tested on a population sample of 1,449 New Zealanders aged 49–60. Confirmatory factor analysis, bivariate correlations, and hierarchical regression provided support for the valid use of the measure. Necessary antecedents, such as the tendency to look to the future, and locus of control were significantly related to the Process of Retirement Planning Scale (PRePS). The PRePS also outperformed retirement planning measures used in the Health and Retirement Study (F. T. Juster & R. Suzman, 1995) after controlling for socioeconomic and psychological variables. This measure will enable social policy makers to determine which stages of retirement planning require support and intervention. The PRePS will also help to determine which domains of retirement planning predict well-being in later life and the factors which differentiate those who are planning from those who are not. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nanocrystallinity in RuO2 coatings—Influence of precursor and preparation temperature

The effects of precursor and calcination temperature on the nano morphology of ruthenium dioxide on titanium, prepared from thermal decomposition of aqueous salt solutions were investigated. Transmission electron microscopy, X-ray diffraction, gas porosimetry and cyclic voltammetry showed that lower calcination temperature yielded smaller crystallites. The crystallites were between 6 and 22 nm in diameter. When using ruthenium nitrosyl nitrate the firing temperature had a large impact on the grain size, but for chloride there was only a minor effect in the temperature range 350-550 °C.     

Impact of platinum contamination on ferroelectric memories

Abstract

The impact of platinum contamination on the breakdown properties of gate oxide is reported. Wafers were intentionally contaminated with 1×10¹³ to 4×10¹⁴ at/cm² Pt after a 7.5 nm gate oxide growth, 300 nm poly-silicon deposition and subsequent phosphorus doping. Breakdown characteristics were evaluated using a voltage ramp method. The current-voltage curves of MOS capacitors show very few low field breakdown events, and the main field breakdown occurs at 12 MV/cm. If compared to clean wafers, platinum does not increase the defect density seriously. It is found from the E-Ramp results that platinum contamination up to 4×10¹⁴ at/cm² does not have a pronounced effect on the gate oxide integrity if the contamination occurs after front-end-of-line processing of device fabrication.     

Application of organosilane coatings for improved anti-adhesive properties enabling facilitated demolding in polymer processing

Easy and residue-free demolding is an everlasting topic in the plastics processing industry. Typically, facile ejection of the produced parts from the mold is provided by separation agents (silicon sprays, surface coatings). In this work, a perfluoroalkyl-based organosilane coating is applied to exchangeable substrates of an injection mold. Besides the simple application, the coating can also be restored easily in a procedure based on flame treatment. Coating and recoating are proven by contact angle measurements with water, while the anti-adhesive effect and the related relief during demolding are evaluated using a special measuring device in an instrumented two-plate injection mold. The results reveal that the organosilane layer reduces the demolding forces and the resulting static friction coefficient by 50%. Furthermore, multiple recoating significantly improves the durability of the anti-adhesive coating. Based on these findings, the easily applicable and renewable organosilane coating represents a suitable alternative to conventional release coatings.     

Polymeric Microspheres/Cells/Extracellular Matrix Constructs Produced by Auto-Assembly for Bone Modular Tissue Engineering

Modular tissue engineering (MTE) is a novel “bottom-up” approach to create engineered biological tissues from microscale repeating units. Our aim was to obtain microtissue constructs, based on polymer microspheres (MSs) populated with cells, which can be further assembled into larger tissue blocks and used in bone MTE. Poly(L-lactide-co-glycolide) MS of 165 ± 47 µm in diameter were produced by oil-in-water emulsification and treated with 0.1 M NaOH. To improve cell adhesion, MSs were coated with poly-L-lysine (PLL) or human recombinant collagen type I (COL). The presence of oxygenated functionalities and PLL/COL coating on MS was confirmed by X-ray photoelectron spectroscopy (XPS). To assess the influence of medium composition on adhesion, proliferation, and osteogenic differentiation, preosteoblast MC3T3-E1 cells were cultured on MS in minimal essential medium (MEM) and osteogenic differentiation medium (OSG). Moreover, to assess the potential osteoblast–osteoclast cross-talk phenomenon and the influence of signaling molecules released by osteoclasts on osteoblast cell culture, a medium obtained from osteoclast culture (OSC) was also used. To impel the cells to adhere and grow on the MS, anti-adhesive cell culture plates were utilized. The results show that MS coated with PLL and COL significantly favor the adhesion and growth of MC3T3-E1 cells on days 1 and 7, respectively, in all experimental conditions tested. On day 7, three-dimensional MS/cell/extracellular matrix constructs were created owing to auto-assembly. The cells grown in such constructs exhibited high activity of early osteogenic differentiation marker, namely, alkaline phosphatase. Superior cell growth on PLL- and COL-coated MS on day 14 was observed in the OSG medium. Interestingly, deposition of extracellular matrix and its mineralization was particularly enhanced on COL-coated MS in OSG medium on day 14. In our study, we developed a method of spontaneous formation of organoid-like MS-based cell/ECM constructs with a few millimeters in size. Such constructs may be regarded as building blocks in bone MTE.     

Translational Read-Through Therapy of RPGR Nonsense Mutations

X-chromosomal retinitis pigmentosa (RP) frequently is caused by mutations in the retinitis pigmentosa GTPase regulator (RPGR) gene. We evaluated the potential of PTC124 (Ataluren, Translama^TM) treatment to promote ribosomal read-through of premature termination codons (PTC) in RPGR. Expression constructs in HEK293T cells showed that the efficacy of read-through reagents is higher for UGA than UAA PTCs. We identified the novel hemizygous nonsense mutation c.1154T > A, p.Leu385* ({"type":"entrez-nucleotide","attrs":{"text":"NM_000328.3","term_id":"1677500221"}}NM_000328.3) causing a UAA PTC in RPGR and generated patient-derived fibroblasts. Immunocytochemistry of serum-starved control fibroblasts showed the RPGR protein in a dot-like expression pattern along the primary cilium. In contrast, RPGR was no longer detectable at the primary cilium in patient-derived cells. Applying PTC124 restored RPGR at the cilium in approximately 8% of patient-derived cells. RT-PCR and Western blot assays verified the pathogenic mechanisms underlying the nonsense variant. Immunofluorescence stainings confirmed the successful PTC124 treatment. Our results showed for the first time that PTC124 induces read-through of PTCs in RPGR and restores the localization of the RPGR protein at the primary cilium in patient-derived cells. These results may provide a promising new treatment option for patients suffering from nonsense mutations in RPGR or other genetic diseases.     

Antithrombin and Its Role in Host Defense and Inflammation

Antithrombin (AT) is a natural anticoagulant that interacts with activated proteases of the coagulation system and with heparan sulfate proteoglycans (HSPG) on the surface of cells. The protein, which is synthesized in the liver, is also essential to confer the effects of therapeutic heparin. However, AT levels drop in systemic inflammatory diseases. The reason for this decline is consumption by the coagulation system but also by immunological processes. Aside from the primarily known anticoagulant effects, AT elicits distinct anti-inflammatory signaling responses. It binds to structures of the glycocalyx (syndecan-4) and further modulates the inflammatory response of endothelial cells and leukocytes by interacting with surface receptors. Additionally, AT exerts direct antimicrobial effects: depending on AT glycosylation it can bind to and perforate bacterial cell walls. Peptide fragments derived from proteolytic degradation of AT exert antibacterial properties. Despite these promising characteristics, therapeutic supplementation in inflammatory conditions has not proven to be effective in randomized control trials. Nevertheless, new insights provided by subgroup analyses and retrospective trials suggest that a recommendation be made to identify the patient population that would benefit most from AT substitution. Recent experiment findings place the role of various AT isoforms in the spotlight. This review provides an overview of new insights into a supposedly well-known molecule.