Characterization of the Polishing‐Induced Contamination of Fused Silica Optics

In this work, the polishing‐induced contamination layer at the fused silica optics surface was studied with various interface analysis techniques: Secondary Ion Mass Spectroscopy (SIMS), Electron Probe Microanalysis (EPMA), X‐Ray Photoelectron Spectroscopy (XPS), and Inductively Coupled Plasma—Optical Emission Spectroscopy (ICP‐OES). Samples were prepared using an MRF polishing machine and cerium‐based slurry. The cerium and iron penetration and concentration were measured in the surface out of defects. Cerium is embedded at the surface in a 60 nm layer and concentrated at 1200 ppmw in this layer while iron concentration falls down at 30 nm. Spatial distribution and homogeneity of the pollution were also studied in the scratches and bevel using SIMS and EPMA techniques. We saw evidence that surface defects, such as scratches, are specific places that hold the pollutants. This overconcentration is also observed in the chamfer. These new insights into the polishing‐induced contamination of fused silica optics and it repartition have been obtained using various characterization methods. Advantages and disadvantages of each one are discussed.     

Influence of catalyst support geometry and wall thickness on NO x trap desulfation: rich/lean wobbling strategies and hexagonal cell supports for high SO2 selectivity during desulfation

Topics in Catalysis - This Synthetic Gas Bench (SGB) study focuses on the effect of cell geometry and wall thickness on the gasoline NO x trap functionality. The data show that besides a NO x trap...     

Orientation and Feeding Responses of the Pollen Beetle, Meligethes aeneus, to Candytuft, Iberis amara

The pollen beetle, Meligethes aeneus, which is an important pest of oilseed rape, Brassica napus, and turnip rape, B. rapa var. campestris, does not oviposit in all species of the Brassicaceae. The relationship between M. aeneus and candytuft, Iberis amara (Brassicacae), was investigated as part of chemical ecological studies into the development of control methods employing non-host-derived repellents. In choice and nonchoice feeding tests, M. aeneus completely rejected I. amara. However, in a field experiment using traps baited with flowering racemes of I. amara and B. napus, M. aeneus was attracted to both species. Gas chromatographic (GC) and GC-electroantennogram (GC-EAG) analyses indicated that the profiles of the floral volatiles of the two species are different. At least 12 compounds among the I. amara floral volatiles were detected by the M. aeneus antenna, and, of these, hexanoic acid, (E)-4,8-dimethyl-1,3,7-nonatriene and alpha-cedrene were not found among B. napus flower volatiles. Since M. aeneus is stimulated by floral volatiles to approach I. amara, but rejects it near, or at, the plant surface, I. amara does not produce repellents that could be used to manipulate M. aeneus. However, it may contain feeding deterrent(s) that could be used in "push-pull" control techniques or in the development of resistant brassicaceous crops.     

Intrusive probes in riser applications

Many of the probes used to understand hydrodynamics in circulating fluidized bed risers intrude into the environment they are measuring, although assumptions are typically asserted that the intrusive probes do not affect the data collected. This could be a poor assumption in some cases and conditions. We found that intrusive fiber‐optic probe measurements consistently mis‐predicted the solids concentration compared to the nonintrusive pressure drop measurements outside the fully developed flow region of a riser containing fluid catalytic cracking catalyst or glass bead particles. The discrepancy was sensitive to superficial gas velocity, solid circulation rate, probe position, and flow direction. Barracuda VR? computational fluid dynamics simulations confirmed this, and indicated that particle momentum was lost at the leading edge of the probe and particles were spilling over to the probe tip. Accordingly, new probe designs were proposed to mitigate the intrusiveness of a fiber‐optic probe for more accurate characterization. © 2017 American Institute of Chemical Engineers AIChE J, 63: 5361–5374, 2017     

Synthesis and Biochemical Evaluation of Biotinylated Conjugates of Largazole Analogues: Selective Class I Histone Deacetylase Inhibitors

The synthesis of biotinylated conjugates of synthetic analogues of the potent and selective histone deacetylase (HDAC) inhibitor largazole is reported. The thiazole moiety of the parent compound's cap group was derivatized to allow the chemical conjugation to biotin. The derivatized largazole analogues were assayed across a panel of HDACs 1–9 and retained potent and selective inhibitory activity towards the class I HDAC isoforms. The biotinylated conjugate was further shown to pull down HDACs 1, 2, and 3.     

Interpolymer radical coupling: A toolbox complementary to controlled radical polymerization

The current review focuses on the relevance and practical benefit of interpolymer radical coupling methods. The latter are developing rapidly and constitute a perfectly complementary macromolecular engineering toolbox to the controlled radical polymerization techniques (CRP). Indeed, all structures formed by CRP are likely to be prone to radical coupling reactions, which multiply the available synthetic possibilities. Basically, the coupling systems can be divided in two main categories. The first one, including the atom transfer radical coupling (ATRC), silane radical atom abstraction (SRAA) and cobalt-mediated radical coupling (CMRC), relies on the recombination of macroradicals produced from a dormant species. The second one, including atom transfer nitroxide radical coupling (ATNRC), single electron transfer nitroxide radical coupling (SETNRC), enhanced spin capturing polymerization (ESCP) and nitrone/nitroso mediated radical coupling (NMRC), makes use of a radical scavenger in order to promote the conjugation of the polymer chains. More than a compilation of macromolecular engineering achievements, the present review additionally aims to emphasize the particularities, synthetic potential and present limitations of each system.     

Cover Image,Volume 66, Issue 10

The cover image, by Bruna A. Bregadiolli et al., is based on the Research Article Towards the synthesis of poly(azafulleroid)s: main chain fullerene oligomers for organic photovoltaic devices, DOI: 10.1002/pi.5419 .

     

Oxadiazole Derivatives as Dual Orexin Receptor Antagonists: Synthesis,Structure–Activity Relationships,and Sleep-Promoting Properties in Rats

The orexin system plays an important role in the regulation of wakefulness. Suvorexant, a dual orexin receptor antagonist (DORA) is approved for the treatment of primary insomnia. Herein, we outline our optimization efforts toward a novel DORA. We started our investigation with rac-[3-(5-chloro-benzooxazol-2-ylamino)piperidin-1-yl]-(5-methyl-2-[1,2,3]triazol-2-ylphenyl)methanone ( 3 ), a structural hybrid of suvorexant and a piperidine-containing DORA. During the optimization, we resolved liabilities such as chemical instability, CYP3A4 inhibition, and low brain penetration potential. Furthermore, structural modification of the piperidine scaffold was essential to improve potency at the orexin 2 receptor. This work led to the identification of (5-methoxy-4-methyl-2-[1,2,3]triazol-2-ylphenyl)-{(S)-2-[5-(2-trifluoromethoxyphenyl)-[1,2,4]oxadiazol-3-yl]pyrrolidin-1-yl}methanone ( 51 ), a potent, brain-penetrating DORA with in vivo efficacy similar to that of suvorexant in rats.     

Influence of Membrane Intrusion on Permeate‐Sided Pressure Drop During High‐Pressure Reverse Osmosis

By replacing thermal concentration processes, high‐pressure reverse osmosis has the potential to contribute to cost and energy savings regarding concepts for industrial water reuse. To provide a better understanding of the spiral‐wound element behavior during high‐pressure operation, this study focusses on the investigation of their performance by scrutinizing the crucial effect of the permeate‐sided pressure drop induced by membrane‐spacer interactions. The experiments show a considerable influence of membrane intrusion on the element performance with a strong dependence on the feed pressure.