Über die Herstellung von α-Sulfofettsäureestern

Preparation of Esters of α-Sulfo-Fatty Acids A process for the continuous α-sulfonation of saturated fatty acid esters with SO₃ was worked out and a special bleaching process was developed for these products. The conversion, i. e. the degree of sulfonation is of the order of 95–99%. Solvents, further processing steps or purification operations for the separation of by-products are not required.     

Effect of Granule Size on the Structure of Nanoporous Ceramics Based on Organosilicon Polymer

Porosity in nanoporous ceramics produced by pyrolysis of organosilicon polymer at a temperature of 600°C was investigated using the BET method. Samples were molded from fractionated granules produced by single or double milling in a planetary mill of a polymer previously solidified and heat-treated at 200°C. Specific surface area depending on nanopores sharply decreases after the granules reach a size over 250 m in single milling and over 1000 m in double milling. An explanation for these facts is given in the context of synergism.     

13C n.m.r. study of raw materials for carbon black

¹³C n.m.r. spectroscopy has been applied to investigate a number of coal tar and petroleum-derived carbon black feedstocks. Application of the J-modulated spin echo technique is especially rewarding, as this method renders the quaternary carbons directly detectable. Thus the quality of carbon black feedstocks can additionally be gauged on the basis of the contents of quaternary carbons, which is a direct indication of the carbon yield in the carbon black production process.     

Compatibilization of inorganic particles for polymeric nanocomposites. Optimization of the size and the compatibility of ZnO particles

Summary The synthesis of in-situ hydrophobic functionalized ZnO nanoparticles via an emulsion process is systematically investigated. Different parameters are varied, such as precursor salt concentration and ultrasonification, to optimize the size and the size distribution of the ZnO particles. Particles with a size below 25 nm and surrounded by a hydrophobic polymer shell can be easily obtained. The influence of the polymeric shell on the compatibility with different polymeric matrices is described. Due to the small size of the inorganic particles and the excellent hydrophobization, highly transparent inorganic/organic nanocomposites can be obtained by spin-coating and extrusion.     

Upcycling of polypropylene with various concentrations of peroxydicarbonate and dilauroyl peroxide and two processing steps

The influence of two peroxides (peroxydicarbonate/dilauroyl peroxide) with various concentrations (10–200 mmol/kg PP) and their effective opportunity to introduce long chain branched (LCB) were investigated. The dependence of a single and double extrusion step and the changes of the properties were studied. Experiments were carried out in a single screw extruder at 180°C for the first extrusion step (modification) and at 240°C for the second extrusion step (processing simulation). Melt flow rate and dynamic rheological properties were studied at a measuring temperature of 230°C. For the definitive determination of long chain branched polypropylene (LCB-PP) served the extensional rheology measurements. The mechanical properties were examined via tensile test and impact tensile test. Summarized, LCB (melt strength) could be observed via extensional rheology for all modified specimens and the mechanical properties were maintained or even improved for the modified samples. Particularly, samples containing dilauroyl peroxide display excellent mechanical properties in this study.     

Think,feel, bid: the impact of environmental conditions on the role of bidders’ cognitive and affective processes in auction bidding

Environmental conditions and the interplay of cognitive and affective processes both exert influences on bidding behavior. This paper brings the above together, considering how the (external) auction environment determines the impact of (internal) cognitive and affective processes on bidding behavior, assessed in comparison to the optimal bid. Two aspects of the auction environment were considered, namely auction dynamics (low: first-price sealed-bid auction, high: Dutch auction) and value uncertainty (low, high). In a laboratory experiment, we assess bidders’ cognitive workload and emotional arousal through physiological measurements. We find that higher auction dynamics increase the impact of emotional arousal on bid deviations, but not that of cognitive workload. Higher value uncertainty, conversely, increases the impact of cognitive workload on bid deviations, but not that of emotional arousal. Taken together, the auction environment is a critical factor in understanding the nature of the underlying decision process and its impact on bids.     

Smoothed Particle Hydrodynamics (SPH) simulation of a high-pressure homogenization process

High-pressure homogenization is a widely used process in the food, pharmaceutical, and cosmetic industry for producing emulsions. Because of small dimensions and high velocities, the experimental and numerical investigation of such a process is challenging. Hence, the development of products is mostly based on trial and error. In this paper, simulations of a generic high-pressure homogenization process using the Lagrangian, mesh-free smoothed particle hydrodynamics (SPH) method are presented and compared to experimental findings using Micro-Particle Image Velocimetry (μ-PIV). The SPH code has been developed and validated with the scope of simulating technical relevant multi-phase problems (Höfler et al. 2012). The present simulations cover the investigation of two different dynamic viscosities of the dispersed phase as well as different droplet trajectories. The comparison between the simulations and the experiments focusses on the velocity distribution of the continuous phase and the droplet deformation and breakup. In both cases a qualitatively good agreement is observed, demonstrating the ability of our SPH implementation for simulating technical relevant two-phase flows.     

Toward the Proteome of the Human Peripheral Blood Eosinophil

Eosinophils (EOSs) are granular leukocytes that have significant roles in many inflammatory and immunoregulatory responses, especially asthma and allergic diseases. We have undertaken a fairly comprehensive proteomic analysis of purified peripheral blood EOSs from normal human donors primarily employing 2‐DE with protein spot identification by MALDI‐MS. Protein subfractionation methods employed included IEF (Zoom^® Fractionator) and subcellular fractionation using differential protein solubilization. We have identified 3141 proteins, which had Mascot expectation scores of 10^?3 or less. Of these 426 were unique and non‐redundant of which 231 were novel proteins not previously reported to occur in EOSs. Ingenuity Pathway Analysis showed that some 70% of the non‐redundant proteins could be subdivided into categories that are clearly related to currently known EOS biological activities. Cytoskeletal and associated proteins predominated among the proteins identified. Extensive protein posttranslational modifications were evident, many of which have not been previously reported that reflected the dynamic character of the EOS. This data set of eosinophilic proteins will prove valuable in comparative studies of disease versus normal states and for studies of gender differences and polymorphic variation among individuals.     

The dynamics of avalanches of granular materials from initiation to runout. Part II. Experiments

Summary This paper describes a model to predict the flow of an initially stationary mass of cohesionsless granular material down a rough curved bed and checks it against laboratory experiments that were conducted with two different kinds of granular materials that are released from rest and travel in a chute consisting of a straight inclined section, a curved segment that is followed by a straight horizontal segment. This work is of interest in connection with the motion of landslides, rockfalls and ice and dense flow snow avalanches. Experiments were performed with two different granular materials, nearly spherical glass beads of 3 mm nominal diameter, Vestolen particles (a light plastic material) of lense type shape and 4 mm nominal diameter and 2,5 mm height. Piles of finite masses of these granular materials with various initial shapes and weight were released from rest in a 100 mm wide chute with the mentioned bent profile. The basal surface consisted of smooth PVC, but was in other experiments also coated with drawing paper and with sandpaper. The granular masses under motion were photographed and partly video filmed and thus the geometry of the avalanche was recorded as a function of position and time. For the two granular materials and for the three bed linings the angle of repose and the bed friction angle were determined. The experimental technique with which the laboratory avalanches were run are described in detail as is the reliability of the generated data. We present and use the depth-averaged field equations of balance of mass and linear momentum as presented by Savage and Hutter [28]. These are partial differential equations for the depth averaged streamwise velocity and the distribution of the avalanche depth and involve two phenomenological parameters, the internal angle of friction, ø, and a bed friction angle, , both as constitutive properties of Coulomb-type behaviour. We present the model but do not derive its equations. The numerical integration scheme for these equations is a Lagrangian finite difference scheme used earlier by Savage and Hutter [27],[28]. We present this scheme for completeness but do not discuss its peculiarities. Comparison of the theoretical results with experiments is commenced by discussing the implementation of the initial conditions. Observations indicate that with the onset of the motion a dilatation is involved that should be accomodated for in the definition of the initial conditions. Early studies of the temporal evolution of the trailing and leading edges of the granular avalanche indicate that their computed counterparts react sensitively to variations in the bed friction angle but not to those of the internal angle of friction. Furthermore, a weak velocity dependence of the bed friction angle, , is also scen to have a small, but negligible influence on these variables. We finally compare the experimental results with computational findings for many combinations of the masses of the granular materials and bed linings. It is found that the experimental results and the theoretical predictions agree satisfactorily. They thus validate the simple model equations that were proposed in Savage and Hutter [28].     

A Novel Magnetic Hardening Mechanism for Nd-Fe-B Permanent Magnets Based on Solid-State Phase Transformation

Permanent magnets based on neodymium-iron-boron (Nd-Fe-B) alloys provide the highest performance and energy density, finding usage in many high-tech applications. Their magnetic performance relies on the intrinsic properties of the hard-magnetic Nd₂Fe₁₄B phase combined with control over the microstructure during production. In this study, a novel magnetic hardening mechanism is described in such materials based on a solid-state phase transformation. Using modified Nd-Fe-B alloys of the type Nd₁₆Fe_bal-x-y-zCo_xMo_yCu_zB₇ for the first time it is revealed how the microstructural transformation from the metastable Nd₂Fe₁₇B_x phase to the hard-magnetic Nd₂Fe₁₄B phase can be thermally controlled, leading to an astonishing increase in coercivity from ≈200 kAm⁻¹ to almost 700 kAm⁻¹. Furthermore, after thermally treating a quenched sample of Nd₁₆Fe₅₆Co₂₀Mo₂Cu₂B₇, the presence of Mo leads to the formation of fine FeMo₂B₂ precipitates, in the range from micrometers down to a few nanometers. These precipitates are responsible for the refinement of the Nd₂Fe₁₄B grains and so for the high coercivity. This mechanism can be incorporated into existing manufacturing processes and can prove to be applicable to novel fabrication routes for Nd-Fe-B magnets, such as additive manufacturing.