Effects of dietary inclusion of xylooligo‐ saccharides,arabinoxylooligosaccha‐ rides and soluble arabinoxylan on the microbial composition of caecal contents of chickens

BACKGROUND: Arabinoxylan (AX)‐derived preparations have raised particular interest by the suggestion that they exert prebiotic properties. Therefore an in vivo experiment was conducted to study the effects of xylooligosaccharides (XOS), arabinoxylooligosaccharides (AXOS) and soluble AX (S‐AX) on several groups of gut bacteria of chickens. Chickens were fed a control diet or the same diet supplemented with 2.5 g kg^?1 of XOS (average degree of polymerisation (avDP) of 3, average degree of arabinose substitution (avDS) of 0.09), wheat bran‐derived AXOS (avDP 9, avDS 0.34) or wheat endosperm alkali‐solubilised AX (S‐AX, avDP > 6000, avDS 0.5). RESULTS: All treatment groups showed an increase in the number of caecal bifidobacteria after 2 weeks of feeding (P < 0.05), while the treatments did not impact numbers of Enterobacteriaceae and aerobic lactobacilli in the caeca relative to the control. XOS led to a tremendous increase in caecal bifidobacteria counts (10⁸ g^?1 for the XOS treatment versus 10³ g^?1 for the control treatment) after only 1 week of supplementation, while AXOS and S‐AX led to similar strong increases in bifidobacteria counts after 2 weeks of supplementation. Addition of S‐AX to the diet, but not of AXOS or XOS, led to a significantly decreased (P < 0.05) body weight gain after 2 weeks of feeding relative to animals on the control diet, consistent with its known viscosity‐related antinutritive effects in chickens. CONCLUSION: Similar to XOS, AXOS selectively stimulate the presence of bifidobacteria in the caeca of chickens, establishing their bifidogenic effect as a first indicator for prebiotic potential. Copyright © 2008 Society of Chemical Industry     

Cosmetic assessment of the human hair by confocal microscopy

The optical sectioning property of the confocal microscope offers a breakthrough from the classic observation of the hair in a scanning electron microscope (SEM). Confocal microscopy requires minimal sampling preparation, and the hair can be observed in its natural environment with less damage than by other microscopic methods such as SEM. While used in the reflection mode, the true morphology of the cuticle and the various exogenous deposits at the surface can be identified and quantified. This relatively noninvasive, nondestructive technique is routinely used by us to monitor the efficiency of cleansing shampoos, to assess the homogeneity of layering polymers, and to evaluate the changes they induce in the optical properties of the hair surface in terms of opacity, transparency, and brilliancy. A second important field of investigation uses the fluorescence channel which reveals the internal structure of the hair. Fluorescent probes (rhodamine and its derivatives) demonstrate the routes of penetration and outline the geometry of cortical cells and of the medulla according to their lipophilic or hydrophilic properties. A volume rendering of a hair cylinder provides a better understanding of the interrelationships between cuticle cells, cortical cells, and the medullar channel. This recent technology is becoming an invaluable tool for the cosmetic assessment of the hair.     

Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

La substituted Sr2MnO4 as a possible cathode material in SOFC

Sr_2−xLa_xMnO_4+δ (x = 0.4, 0.5, 0.6) oxides were studied as the cathode material for solid oxide fuel cells (SOFC). The reactivity tests indicated that no reaction occurred between Sr_2−xLa_xMnO_4+δ and CGO at annealing temperature of 1000 °C, and the electrode formed good contact with the electrolyte after being sintered at 1000 °C for 4 h. The total electrical conductivity, which has strong effect on the electrode properties, was determined in a temperature range from 100 to 800 °C. The maximum value of 5.7 S cm⁻¹ was found for the x = 0.6 phase at 800 °C in air. The cathode polarization and AC impedance results showed that Sr_1.4La_0.6MnO_4+δ exhibited the lowest cathode overpotential. The area specific resistance (ASR) was 0.39 Ω cm² at 800 °C in air. The charge transfer process is the rate-limiting step for oxygen reduction reaction on Sr_1.4La_0.6MnO_4+δ electrode.     

Particle swarm optimization applied to the co-design of a fuel cell air circuit

This paper presents an optimization approach applied to a whole fuel cell (FC) air supply system including its geometry and its control. The aim is to optimize its power consumption along with its mass. Particle swarm optimization (PSO) algorithm is used to define the design parameters of both permanent magnet synchronous motor (PMSM) and a fuzzy logic controller (FLC). The results are compared with those obtained by a sequential optimization process and advantages of co-design optimization approach are clearly shown. Indeed, a significant reduction of the objective function (made up on both motor mass and energy consumption) on a considered operating cycle can be obtained.     

Retail competition in electricity markets

The introduction of competition into retail electricity supply gave rise to great expectations. However, to date, its performance has proven less than stellar, owing primarily to the theoretical concepts underpinning this reform, which draw heavily on the Austrian school. Neither consumers’ decision processes nor this sector's technical paradigm were adequately accounted for, leading to an uncorrect estimation of the expected impact of opening to competition. Short- and medium-term prospects for the evolution of retail markets must be reconsidered from the perspective of greater stability: not a generalization of competition, but rather a persistent segmentation between active and inactive clients; not a large and rapid diffusion of radical innovations in commercialisation, with the potential for undermining the incumbents’ positions.     

开关电源环路中的TL431

在此前一系列的3篇文章中，指出了如何采用TL431来实现1类和2类补偿器。如果前述补偿器类型适合大多数电流模式控制配置工作，其它控制模式则可能需要3类补偿器。举例来说，如果需要对连续导电模式（CCM）电压模式转换器进行补偿，就需要额外的极点和零点。在这3类配置中，TL431并不太有利于实践这样的设计：眼前的快通道（fast lane）显然会使设计工作复杂化。本文提出了简单的构想，以与所观测到交流输入完全解耦的外部直流偏置来消除快通道。这样一来，设计工作被简化，类似于采用运放来构建传统的3类补偿器。     

Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression

Entangled fibrous materials have been manufactured from different fibers: metallic fibers, glass fibers, and carbon fibers. Specimens have been produced with and without cross-links between fibers. Cross-links have been achieved using epoxy spraying. The scope of this article is to analyze the mechanical behavior of these materials and to compare it with available models. The first part of this article deals with entangled fibrous materials without cross-link between fibers. Compression tests are detailed and test reproducibility is checked. In the second part, compression tests were performed on materials manufactured with cross-linked fibers. The specific mechanical behavior obtained is discussed.     

Optimization methodology of dynamic data structures based on genetic algorithms for multimedia embedded systems

Modern multimedia application exhibit high resource utilization. In order to efficiently run this kind of applications in embedded systems, the dynamic memory subsystem needs to be optimized. A key role in this optimization is played by the dynamic data structures that reside in every real-life application. This paper presents a novel and automated way to optimize dynamic data structures. The search space is pruned using genetic algorithms that converge to the best multilayered data structure implementation for the targeted applications.