Silver versus white sheet as a back reflector for microcrystalline silicon solar cells deposited on LPCVD‐ZnO electrodes of various textures

We compare the performance of two back reflector designs on the optoelectrical properties of microcrystalline silicon solar cells. The first one consists of a 5‐µm‐thick low‐pressure chemical vapor deposition (LPCVD)‐ZnO electrode combined with a white sheet; the second one incorporates an Ag reflector deposited on a thin LPCVD‐ZnO layer (with thickness below 200 nm). For this latter design, the optical loss in the nano‐rough Ag reflector can be strongly reduced by smoothing the surface of the thin underlying ZnO layer, by means of an Ar‐plasma treatment. Because of its superior lateral conductivity, the thin‐ZnO/Ag back reflector design provides a higher fill factor than the dielectric back reflector design. When decreasing the roughness of the front electrode with respect to our standard front LPCVD‐ZnO layer, the electrical cell performance is improved; in addition, the implementation of the thin‐ZnO/Ag back reflector leads to a significant relative gain in light trapping. Applying this newly optimized combination of front and back electrodes, the conversion efficiency is improved from 8.9% up to 9.4%, for cells with an active‐layer thickness of only 1.1 µm. We thereby highlight the necessity to optimize simultaneously the front and back electrodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Linear amphiphilic diblock copolymers of lactide and 2-dimethylaminoethyl methacrylate using bifunctional-initiator and one-pot approaches

Linear amphiphilic diblock copolymers of polylactide (PLA) and poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by atom transfer radical polymerization (ATRP) of DMAEMA followed by ring-opening polymerization (ROP) of LLA using the bifunctional initiator, 2′-hydroxyethyl 2-bromoisobutyrate. NMR showed that the resulting PLA block was racemic and a quaternization/precipitation technique showed that there were significant amounts of racemic PLA homopolymer. In addition, simultaneous ATRP of DMAEMA and ROP of l-lactide by tin octoate were conducted at varied temperatures, indicating 90 °C as a suitable compromise temperature; this one-pot process also led to racemization and P(L)LA homopolymer. The racemization was attributed to reversible deprotonation of LLA by the N(CH₃)₂ moiety of (P)DMAEMA and the PLA homopolymer impurity was related to in situ formation of lactoyl lactate (LA–LA) due to nucleophilic ring opening of lactide by the amino moieties of (P)DMAEMA. The methods presented can be useful for the preparation of PDMAEMA–b–PLA/PLA composites in a two-step process or in a single step, one-pot process.     

Dispersive mixing efficiency of an elongational flow mixer on PP/EPDM blends: Morphological analysis and correlation with viscoelastic properties

Polypropylene and ethylene‐propylene‐diene terpolymer (PP/EPDM) blends were melt compounded in a new mixing device, designed in our laboratory under the trademark of RMX®, which predominantly generates elongational flows. Dispersion of the EPDM minor phase in PP was carried out in both RMX® and in an internal mixer (Haake Rheomix 600) at equivalent specific mixing energies and the resultant morphologies obtained by SEM were analyzed and compared. A better dispersive mixing efficiency of the RMX® mixer, i.e., lower D_n and D_v of the dispersed EPDM phase was observed. The impact of elongational flow was more pronounced for blends having a high viscosity ratio p, indicating an enhanced droplet break‐up mechanism, which was attributed to the combination of high shear rates inside the mixing element and important elongational flows in the convergent/divergent zones. The morphology of the blends was correlated with their linear viscoelastic properties by using the Palierne model. Very good agreement was found for the PP/EPDM 80/20 blends but for higher EPDM content, the Palierne model failed to describe the rheological behavior, which was attributed to percolation of the minor phase with increasing the concentration. Higher elasticity at low frequencies was observed for blends processed in the RMX®, which was attributed to a higher generated interfacial area. POLYM. ENG. SCI., 54:1444–1457, 2014. © 2013 Society of Plastics Engineers     

水杨酸对气相色谱-质谱法检测化妆品中苯酚的影响

2007版《化妆品卫生规范》规定,使用HPLC-DAD法检测化妆品中的苯酚,如有阳性结果,必须用GC-MS法进行验证。采用GC-MS法对含有水杨酸的化妆品进行检测,考察水杨酸对苯酚测定的影响。结果表明,水杨酸对热不稳定,在GC-MS检测条件下会高温分解并释放出苯酚,且热降解程度随着进样口温度的升高而显著增强。用GC-MS法检测含有水杨酸的化妆品时,会得到苯酚含量偏高或假阳性的检测结果。     

Shhedding New Light on the Role of Hedgehog Signaling in Corneal Wound Healing

The cornea, an anterior ocular tissue that notably serves to protect the eye from external insults and refract light, requires constant epithelium renewal and efficient healing following injury to maintain ocular homeostasis. Although several key cell populations and molecular pathways implicated in corneal wound healing have already been thoroughly investigated, insufficient/impaired or excessive corneal wound healing remains a major clinical issue in ophthalmology, and new avenues of research are still needed to further improve corneal wound healing. Because of its implication in numerous cellular/tissular homeostatic processes and oxidative stress, there is growing evidence of the role of Hedgehog signaling pathway in physiological and pathological corneal wound healing. Reviewing current scientific evidence, Hedgehog signaling and its effectors participate in corneal wound healing mainly at the level of the corneal and limbal epithelium, where Sonic Hedgehog-mediated signaling promotes limbal stem cell proliferation and corneal epithelial cell proliferation and migration following corneal injury. Hedgehog signaling could also participate in corneal epithelial barrier homeostasis and in pathological corneal healing such as corneal injury-related neovascularization. By gaining a better understanding of the role of this double-edged sword in physiological and pathological corneal wound healing, fascinating new research avenues and therapeutic strategies will undoubtedly emerge.     

A Single Bout of Ultra-Endurance Exercise Reveals Early Signs of Muscle Aging in Master Athletes

Middle-aged and master endurance athletes exhibit similar physical performance and long-term muscle adaptation to aerobic exercise. Nevertheless, we hypothesized that the short-term plasticity of the skeletal muscle might be distinctly altered for master athletes when they are challenged by a single bout of prolonged moderate-intensity exercise. Six middle-aged (37Y) and five older (50Y) master highly-trained athletes performed a 24-h treadmill run (24TR). Vastus lateralis muscle biopsies were collected before and after the run and assessed for proteomics, fiber morphometry, intramyocellular lipid droplets (LD), mitochondrial oxidative activity, extracellular matrix (ECM), and micro-vascularisation. Before 24TR, muscle fiber type morphometry, intramyocellular LD, oxidative activity, ECM and micro-vascularisation were similar between master and middle-aged runners. For 37Y runners, 24TR was associated with ECM thickening, increased capillary-to-fiber interface, and an 89% depletion of LD in type-I fibers. In contrast, for 50Y runners, 24TR did not alter ECM and capillarization and poorly depleted LDs. Moreover, an impaired succinate dehydrogenase activity and functional class scoring of proteomes suggested reduced oxidative phosphorylation post-24TR exclusively in 50Y muscle. Collectively, our data support that middle-aged and master endurance athletes exhibit distinct transient plasticity in response to a single bout of ultra-endurance exercise, which may constitute early signs of muscle aging for master athletes.     

The P2Y2 Receptor C-Terminal Tail Modulates but Is Dispensable for β-Arrestin Recruitment

The P2Y₂ receptor (P2Y₂R) is a G protein-coupled receptor that is activated by extracellular ATP and UTP, to a similar extent. This allows it to play roles in the cell’s response to the (increased) release of these nucleotides, e.g., in response to stress situations, including mechanical stress and oxygen deprivation. However, despite its involvement in important (patho)physiological processes, the intracellular signaling induced by the P2Y₂R remains incompletely described. Therefore, this study implemented a NanoBiT^® functional complementation assay to shed more light on the recruitment of β-arrestins (βarr1 and βarr2) upon receptor activation. More specifically, upon determination of the optimal configuration in this assay system, the effect of different (receptor) residues/regions on βarr recruitment to the receptor in response to ATP or UTP was estimated. To this end, the linker was shortened, the C-terminal tail was truncated, and phosphorylatable residues in the third intracellular loop of the receptor were mutated, in either singly or multiply adapted constructs. The results showed that none of the introduced adaptations entirely abolished the recruitment of either βarr, although EC₅₀ values differed and time-luminescence profiles appeared to be qualitatively altered. The results hint at the C-terminal tail modulating the interaction with βarr, while not being indispensable.     

Modeling bread baking with focus on overall deformation and local porosity evolution

A two dimensional model of bread baking was developed including, for the first time, the dependence of dough viscosity on both temperature and moisture content, the carbon dioxide dissolved from liquid water together with gas generation from yeast at the beginning of baking and the shrinkage due to dough drying. Particular attention was paid to experimental validation of both overall and local variables such as local temperature, overall mass loss, and local moisture content, overall CO₂ released into the oven, and overall deformation and local expansion or shrinkage. Sensitivity studies on generation of carbon dioxide, gravity, and shrinkage are presented to discuss their influences on bread geometry, porosity (reflecting the alveolar structure) and gas pressure. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3847–3863, 2016     

Dielectric features of two grades of bi‐oriented isotactic polypropylene

The dielectric properties of two grades of bi‐oriented isotactic polypropylene were studied with a variety of techniques: breakdown field measurements, dielectric spectroscopy, thermally stimulated depolarization currents (Is), and direct‐current (dc) conduction I values. Standard polypropylene (STPP) and high‐crystallinity polypropylene (HCPP) films were investigated. Measurements were carried out over a wide temperature range (?150°C/+125°C). The breakdown fields in both materials showed a very small difference. On the other hand, the dielectric losses and dc conduction I values were significantly lower in HCPP. Both materials showed a decrease in the dielectric loss versus temperature in the range 20–90°C; this is favorable for application in alternating‐current power capacitors. The analysis of the dc I value allowed us to find evidence of two main conduction mechanisms: (1) below 80°C in both materials, a hopping mechanism due to the motion of electrons occurred in the amorphous phase, and (2) above 80°C, ionic conduction occurred in HCPP, and hopping conduction occurred in STPP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42224.     

Dietary intakes and food sources of fatty acids for Belgian women, focused on n-6 and n-3 polyunsaturated fatty acids

The intake of fat, saturated and monounsaturated FA (SFA and MUFA), and omega-6 and omega-3 PUFA has been estimated in 641 Belgian women (age 18-39 y). Their food intake was recorded using a 2-d food diary. The PUFA included were linoleic (LA), alpha-linolenic (LNA), arachidonic (AA), eicosapentaeonoic (EPA), docosapentaenoic (DPA) and docosahexaenoic (DHA) acids. The mean total fat intake corresponded to 34.3% of total energy intake (E). The mean intake of the FA groups corresponded to 13.7%, 13.1%, and 6.0% of E, for SFA, MUFA, and PUFA, respectively. The mean intake of LA was 5.3% of E and of LNA was 0.6% of E, with a mean LA/LNA ratio of 8.7. The mean intake of AA was 0.03% of E. The mean intake of EPA, DPA, and DHA was 0.4%, 0.01%, and 0.06% of E, respectively. According to the Belgian recommendations, the total fat and SFA intake was too high for about three-quarters of the population. The mean LA and overall n-6 PUFA intake corresponded with the recommendation, with part of the population exceeding the upper level. Conversely, the population showed a large deficit for LNA and n-3 PUFA. The major food source for LA and LNA was fats and oils, followed by cereal products. The main sources of long-chain PUFA were fish and seafood, and meat, poultry, and eggs. From a public health perspective, it seems desirable to tackle the problem of low n-3 PUFA intake.