Effect of current stressing on the reliability of 63Sn37Pb solder joints

The effect of current stressing on the reliability of 63Sn37Pb solder joints with Cu pads was investigated at temperatures of −5 °C and 125 °C up to 600 h. The samples were stressed with 3 A current (6.0 × 10² A/cm² in the solder joint with diameter of 800 μm and 1.7 × 10⁴ A/cm² in the Cu trace with cross section area of 35 × 500 μm). The temperatures of the samples and interfacial reaction within the solder joints were examined. The microstructural change of the solder joints aged at 125 °C without current flow was also evaluated for comparison. It was confirmed that the current flow could cause the temperature of solder joints to rise rapidly and remarkably due to accumulation of massive Joule heat generated by the Cu trace. The solder joints stressed at 125 °C with 3 A current had an extensive growth of Cu₆Sn₅ and Cu₃Sn intermetallic compounds (IMC) at both top and bottom solder-to-pad interfaces. It was a direct result of accelerated aging rather than an electromigration or thermomigration effect in this experiment. The kinetic is believed to be bulk diffusion controlled solid-state reaction, irrespective of the electron flow direction. When stressed at −5 °C with 3 A current, no significant change in microstructure and composition of the solder joints had occurred due to a very low diffusivity of the atoms as most Joule heat was eliminated at low temperature. The IMC evolution of the solder joints aged at 125 °C exhibited a subparabolic growth behavior, which is presumed to be a combined mechanism of grain boundary diffusion and bulk diffusion. This is mainly ascribed to the retardant effect against the diffusion course by the sufficiently thick IMC layer that was initially formed during the reflow soldering.     

WARD: a transmission control protocol-friendly stateless active queue management scheme

In this article, the problem of providing a fair bandwidth allocation to the flows sharing a congested link in a router is investigated. Queue management, bandwidth share and congestion control are very important to both the robustness and fairness of the Internet. The buffer at the outgoing link is a simple FIFO, shared by packets belonging to the flows. A new transmission control protocol (TCP)-friendly router-based active queue management scheme, termed WARD, is proposed to approximate the fair queueing policy. WARD is a simple packet-dropping algorithm with a random mechanism which discriminates against flows that submit more packets per second than is allowed as their fair share. By doing this, it not only protects TCP connections from user datagram protocol flows, but also solves the problem of competing bandwidth among different TCP versions, such as TCP Vegas and TCP Reno. In addition, WARD works quite well for TCP flow isolation even with different round trip times. In other words, WARD improves the unfair bandwidth allocation properties. Furthermore, as it is stateless and easy to implement, WARD controls unresponsive or misbehaving flows with only a minimum overhead.     

Diamino telechelic polybutadienes for solventless styrene-butadiene-styrene (SBS) triblock copolymer formation

High molecular weight, high functionality diamino telechelic polybutadienes (TPBs) were synthesized by ring-opening metathesis polymerization (ROMP) of 1,5-cyclooctadiene (COD) in the presence of a chain transfer agent, 1,8-dicyano-4-octene, followed by lithium aluminum hydride reduction. Melt coupling of diamino TPB with anhydride-terminated polystyrene (PS-anh) resulted in the formation of styrene-butadiene-styrene (SBS) triblock copolymers; ca. 80% maximum conversion of PS-anh was achieved within 30 s. The results from SAXS, TEM, and rheological measurements of the coupling products confirmed the formation of SBS triblock copolymers having lamellar morphology. A fluorescent-labeled PS-anh was used to study the coupling kinetics by diluting the reactants by the addition of non-functional PS.     

Differences in Dialysis Practice Are the Main Reasons for the High Mortality Rate in the United States Compared to Japan

The cumulative survival of Japanese hemodialysis patients is more than 2.5 times better than that of dialysis patients in the United States (U.S.). The difference is particularly pronounced in older patients, being 4 times better in patients over the age of 50 years. The mortality in U.S. patients has increased from 10 to 25% over the last three decades, but has remained stable at around 10% in Japan.
There is no obvious difference in patient selection. The Japanese accept almost as high a proportion of diabetic patients as does the United States, and the mean age of incident patients is higher in Japan.
Renal transplantation, virtually absent in Japan, should increase mortality in U.S. dialysis patients by removing patients with the highest probability of survival, but even if one adds surviving transplant patients and studies prevalent populations, the survival rate is much better in Japan. Genetic factors are unlikely to explain differences in mortality, as older Americans live much longer than older Japanese.
We speculate that the difference lies in the practice of dialysis. Patients in the United States are generally treated by much faster and shorter dialysis than in Japan. This puts a severe burden on the cardiovascular system of older patients, leading to the poorer survival rate. Japanese physicians also appear to be better trained in dialysis and to spend more time with their patients. The nursing shortage in the United States may also contribute to the increased mortality. Whatever the explanations, the U.S. dialysis community must work to equal and, hopefully, surpass the now superior survival of Japanese dialysis patients.     

An overview of electric vehicle technology

An overview of the present status and future trends in electric vehicle technology is provided. The emphasis is on the impact of rapid development of electric motors, power electronics, microelectronics, and new materials. Comparisons are made among various electric drive systems and battery systems. The market size of electric vehicles in the coming years and the potential electric vehicle impacts are discussed     

A knowledge-based expert system for gearing design application using Prolog and C

This paper describes the development of an expert system in gearing design application. The knowledge in this design field is vast and involves selection of appropriate data from large amounts of engineering standards data available in engineering catalogues and design handbooks. Experts very oftens have different opinions in determining the design solution. The theme of the work is to organise, systemise, conserve and spread this knowledge relating to gearing design and configuration.

There is a large number of design parameters involved in gearing design. The design of gears also requires an iterative approach to optimize these design parameters that govern the kinematic, as well as the strength performance. Owing to the complex combinations of these aspects, conventional design office practice tends to become complicated and time consuming. Hence, in this piece of work, attempts are made to formulate a design system capable of designing a required type of gear and its configuration under a specified set of working conditions.

The main features of the expert gearing design system are the use of semantic nets in representing the objects, a frame-based data acquisition and representation system, and production rules in representing the domain-specific knowledge base. The system provides a very user-friendly interface through the use of an expert system development tool Prolog. While Prolog is used to set up the various databases and the inference engine, the detail gear design calculations are performed by C. It is found that the communication between these two language media is excellent in terms of performance and efficiency.     

Role of imidazoline receptors in the cardiovascular actions of moxonidine, rilmenidine and clonidine in conscious rabbits

The present study in conscious rabbits with intracisternal (i.c.) catheters sought to determine the relative contribution of the I1 subtype of imidazoline receptors (IR) and alpha 2 adrenoceptors to the hypotensive effects of rilmenidine, clonidine and moxonidine with an I1-IR/alpha 2 adrenoceptor antagonist efaroxan and a specific alpha 2 adrenoceptor antagonist 2-methoxyidazoxan (2-MI). The alpha 2 adrenoceptor antagonist effect of efaroxan was compared with 2-MI by performing cumulative dose-response curves in the presence of alpha-methyldopa (400 micrograms/kg i.c.). 2-MI was 5.6 times more potent than efaroxan at reversing 75% of the hypotension elicited by alpha-methyldopa (P < .025). This dose ratio was used to match doses of efaroxan and 2-MI for similar alpha 2 adrenoceptor blockade. The effects of efaroxan (4.1, 13, 41 micrograms/kg i.c.) and 2-MI (0.74, 2.3, 7.4 micrograms/kg i.c.) were investigated on a single i.c. dose of rilmenidine (12 micrograms/kg), clonidine (0.75 microgram/kg) and moxonidine (0.51 microgram/kg). These doses of the antihypertensive agents, which were determined from cumulative dose-response curves, produce 90% of the maximum hypotension. Efaroxan was more effective at reversing the hypotension induced by moxonidine and rilmenidine than was 2-MI (P < .01). These findings suggest that rilmenidine and moxonidine act predominantly via IR. By contrast, 2-MI was more effective at reversing the clonidine-induced hypotension than was efaroxan (P < .001), suggesting that clonidine acts mainly via alpha 2 adrenoceptors in conscious normotensive rabbits. Thus, a higher selectivity of the second generation agents moxonidine and rilmenidine for I1-IR over alpha 2 adrenoceptors, compared with the first generation agent clonidine, appears to be necessary for this effect to be manifested in their hypotensive actions.     

Effects of growth with ethanol on fermentation and membrane fluidity of Saccharomyces cerevisiae

Saccharomyces cerevisiae HSc was grown with ethanol at concentrations up to 10% (v/v). The immediate effects of additions of externally added ethanol on CO₂ production and O₂ consumption of washed organisms were studied by stopped-flow membrane inlet quadrupole mass spectrometry. Fermentative activities of organisms grown with ethanol (0–5% v/v) showed similar sensitivities to inhibition by ethanol, whereas those grown with 10% (v/v) ethanol had become protected and were markedly less sensitive. The fluidity of subcellular membrane fractions was measured by determination of the temperature dependence of the rotational order parameter of the spin label 5-doxyl stearic acid (free radical) by electron spin resonance. Mitochondria prepared from yeasts grown with 0, 7 and 9% (v/v) ethanol showed similar overall fluidity, although differences in temperature-dependent behaviour indicate altered lipid composition or lateral phase separations. On the other hand the microsomal fraction from organisms grown with 9% ethanol showed a remarkable increase in fluidity. These data suggest that the protective effects of growth with ethanol near the limit of tolerance on fermentative activities may arise from altered plasma membrane fluidity properties.