A fiber depolarizer using polarization beam splitter loop structure for narrow linewidth light source

A new fiber depolarizer employing a polarization beam splitter loop structure is proposed and demonstrated. The depolarizer is devised for broad-band operation and the depolarization of narrow linewidth light source without any help of polarization controllers or Faraday rotator mirrors. A polarizing method is developed that shows good performance without polarization control unit. Therefore, the proposed depolarizer can be cost-effective and easily configured. From experiments, low output degree of polarization less than 10% is obtained for a narrow linewidth light source.     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

K- and Q-bands CMOS frequency sources with X-band quadrature VCO

Fully integrated 10-, 20-, and 40-GHz frequency sources are presented, which are implemented with a 0.18-/spl mu/m CMOS process. A 10-GHz quadrature voltage-controlled oscillator (QVCO) is designed to have output with a low dc level, which can be effectively followed by a frequency multiplier. The proposed multipliers generate signals of 20 and 40 GHz using the harmonics of the QVCO. To have more harmonic power, a frequency doubler with pinchoff clipping is used without any buffers or dc-level shifters. The QVCO has a low phase noise of -118.67 dBc/Hz at a 1-MHz offset frequency with a 1.8-V power supply. The transistor size effect on phase noise is investigated. The frequency doubler has a low phase noise of -111.67 dBc/Hz at a 1-MHz offset frequency is measured, which is 7 dB higher than a phase noise of the QVCO. The doubler can be tuned between 19.8-22 GHz and the output is -6.83 dBm. A fourth-order frequency multiplier, which is used to obtain 40-GHz outputs, shows a phase noise of -102.0 dBc/Hz at 1-MHz offset frequency with the output power of -18.0 dBm. A large tuning range of 39.3-43.67 GHz (10%) is observed.     

A Dual-based Heuristic for the Simple Facility Location Problem With Stochastic Demand

This paper deals with a stochastic version of the simple facility location problem where the demands of customers are random variables. Under the assumption of step function type distribution of demands, the problem is shown to be approximated by a mixed 0-1 linear programming problem. A heuristic procedure is developed to solve the problem, which successfully extends the well known dual-based approach by Bilde & Krarup, and Erlenkotter. Computational results with 20 test problems are presented to demonstrate the effectiveness of the proposed heuristic.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Metabolic changes in blood and liver of dairy cows during either feed restriction or administration of 1,3-butanediol.

Previous research has shown that a combination of feed restriction and dietary 1,3-butanediol starting at 14 d post-partum resulted in fatty liver and ketosis. Sixteen multiparous Holstein cows were used to determine effects of feed restriction or 1,3-butanediol as separate treatments. Treatments during d 14 to 42 postpartum were 1) control (ad libitum intake), 2) 20% feed restriction, or 3) control plus dietary 1,3-butanediol (5.5% of DM). From d 43 to 56, cows assigned to treatments 2 and 3 received a combination of feed restriction and butanediol. One cow on treatment 2 developed ketosis, but not fatty liver, after only 4 d of feed restriction. No other cows developed fatty liver or ketosis. Both treatments decreased milk production compared with controls. Feed restriction increased the extent of negative energy balance and caused transient increases in concentrations of NEFA, acetate, and beta-hydroxybutyrate in plasma. Concentrations of beta-hydroxybutyrate and insulin in plasma were increased by butanediol, which is a potent ketone body precursor. Concentration of glycogen in liver was less in feed-restricted cows, whereas glycogen and total lipid were greater in cows given butanediol separately. Gluconeogenic capacity of liver slices was not different among groups. Addition of 1,3-butanediol to in vitro incubation media decreased oxidation of propionate to CO2. Neither feed restriction nor dietary 1,3-butanediol as separate treatments induced the fatty liver and ketosis observed in earlier experiments in which the two treatments were given together.     

Monolithically integrated four-channel receiver array using diffused InGaAs (JFET technology)

Four-channel receiver arrays have been fabricated by monolithically integrating diffused InGaAs JFET-based electronics with InGaAs pin photodiodes. Cascode and simple inverter transimpedance amplifier circuits have been produced, both of which use a micro-FET as a tunable feedback element to vary bandwidth between 20 and 800 MHz. A sensitivity of -28.2 dBm was achieved at 1.25 Gbit/s with crosstalk between adjacent channels of -50 dB (electrical).<>     

Heparin Use in Daily Hemodialysis

More frequent dialysis is thought to be associated with increased heparin requirements; however, limited data are available which compare heparin requirements of conventional to daily dialysis. Objectives: To determine differences in heparin dose during conventional thrice‐weekly dialysis (CHD) compared to daily hemodialysis (DHD). Methods: All patients within the daily home hemodialysis at the Northwest Kidney Centers were evaluated for heparin dose both pre‐ and post initiation of daily hemodialysis. Patients on DHD received an initial bolus of heparin, without a continuous heparin drip, and supplemental heparin midway through the dialysis run as needed to maintain adequate activated clotting times (ACTs). CHD patients received a heparin bolus, followed by initiation of heparin drip as needed to maintain adequate ACTs. Results: Of the 1117 patients who dialyze at the NKC, 55% were Caucasian, 21% African‐American, 20% Asian/Pacific Islander, and 35% were of other ethnicity. The majority of patients were greater than 60 years (56%), while 36% ranged from 40–60 years and 13% ranged from 20–40 years. Male patients constituted 54% of patients. Diabetes was the primary cause of renal disease (36%), followed by hypertension (21%) and glomerular disease (18%). Of those patients in the home hemodialysis program (n = 45), 10 patients started daily home hemodialysis using the Aksys daily home hemodialysis system. Of those, the majority was male (100%), Caucasian (78.8%) with an average age of 46.7 ± 18 years. Glomerulonephritis was the primary cause of end‐stage renal disease (40%), while the percentages of other diseases were similar [Alport's syndrome (20%), hypertension (20%) and diabetes (10%)]. Compared to initial DHD heparin requirements (10,111 ± 2219 units), CHD heparin dose requirements (6833 ± 2715 units) were significantly lower (p = 0.045); however, total heparin needs were similar between groups (10,166 ± 4380 units vs. 10,778 ± 2959 units) (p = 0.324). Conclusion: Although patients initiating DHD have greater initial heparin requirements than when on CHD, total heparin doses remain similar to those required on conventional thrice‐weekly hemodialysis. Greater initial heparin doses required during short daily dialysis appear safe compared to those of conventional dialysis.