Characterization of arylamine N-acetyltransferase in Enterobacter aerogenes

N-acetyltransferase (NAT) activity was determined by incubation of purified Enterobacter aerogenes enzyme with 2-aminofluorene (2-AF) as the substrate, followed by high pressure liquid chromatography assays. The NAT activity from E. aerogenes was 0.58 +/- 0.08 nmol/min/mg protein for 2-AF. The values of apparent K(m) and Vmax were 0.72 +/- 0.14 mM and 2.45 +/- 0.29 nmol/min/mg protein, respectively, for 2-AF. The optimal pH value for the enzyme activity was 7.5 for the 2-AF tested. The optimal temperature for enzyme activity was 37 degrees C for the 2-AF substrate. The molecular weight of NAT from E. aerogenes was 44.9 kD. Among a series of divalent cations and salts, Zn2+, Ca2+, and Fe2+ were demonstrated to be the most potent protease inhibitors, and only ethylenediaminetetraacetic acid significantly protected the NAT. Iodoacetamide, in contrast to other agents, markedly inhibited NAT.     

Intelligent copyright protection system using a matching video retrieval algorithm

Many video service sites headed by YouTube know what content requires copyright protection. However, they lack a copyright protection system that automatically distinguishes whether uploaded videos contain legal or illegal content. Existing protection techniques use content-based retrieval methods that compare the features of video. However, if the video encoding has changed in resolution, bit-rate or codec, these techniques do not perform well. Thus, this paper proposes a novel video matching algorithm even if the type of encoding has changed. We also suggest an intelligent copyright protection system using the proposed algorithm. This can serve to automatically prevent the uploading of illegal content. The proposed method has represented the accuracy of 97% with searching algorithm in video-matching experiments and 98.62% with automation algorithm in copyright-protection experiments. Therefore, this system could form a core technology that identifies illegal content and automatically excludes access to illegal content by many video service sites.     

Predictive simulation of human walking transitions using an optimization formulation

A general optimization formulation for transition walking prediction using 3D skeletal model is presented. The formulation is based on a previously presented one-step walking formulation (Xiang et al., Int J Numer Methods Eng 79:667–695, 2009b). Two basic transitions are studied: walk-to-stand and slow-to-fast walk. The slow-to-fast transition is used to connect slow walk to fast walk by using a step-to-step transition formulation. In addition, the speed effects on the walk-to-stand motion are investigated. The joint torques and ground reaction forces (GRF) are recovered and analyzed from the simulation. For slow-to-fast walk transition, the predicted ground reaction forces in step transition is even larger than that of the fast walk. The model shows good correlation with the experimental data for the lower extremities except for the standing ankle profile. The optimal solution of transition simulation is obtained in a few minutes by using predictive dynamics method.     

Effect of stress-strain-law transients on formability

The effect of work-hardening changes, of the type that follow a rapid change of strain state or strain rate, on formability has been investigated using finite element modeling (FEM). A standard sheet tensile test was chosen as an arbitrary forming operation and a rigid-viscoplastic FEM program was employed for analysis. In each case, a transitional region of true strains between 0.1 and 0.2 was modeled. Transients involving lowered work-hardening rates (negative value of An) promoted increased strain localization and premature failure while transients with increased work-hardening rates enhanced formability. Total engineering elongations (50 mm gage length) varied between 20 pct and 46 pct, illustrating the importance of the transient far beyond the transient region. The controlling factor is the effective work-hardening rate in the transient region rather than the change in strength coefficient or flow stressper se. A direct stress offset of the flow curve { } also affects strain localization through a change in effective work-hardening rate.     

A study on the dynamic characteristics of the Korean Yi-dynasty bell type structure

The dynamic characteristics of the Korean Yi-dynasty bell type structure, including the acoustic effects, are analyzed both theoretically and experimentally. The numerical solutions of natural frequencies and mode shape for membrane and flexural behavior are obtained by using the NASTRAN program for the finite element method with plate shell elements of triangular and quadrilateral types. Test bells, A and B types similar to the Kap-Sa bell in Kong-Ju chosen among typical Korean Yi-dynasty bells, are manufactured on different scales to the original bell. To consider the effects of the variation of the structural dimension on the dynamic response, these bells are analyzed with respect to the variation of the thickness of the wall and the bottom rim and the asymmetric Dang-Jwas. The impact method with the Fast Fourier Transform Analyzer is adopted to experimentally assess the dynamic response. Results are in good agreement with the numerical solutions.     

Rheology of poly(vinyl chloride) blends

PVC/EVA blends were studied with an extrusion plastometer in order to examine the effect of EVA on the processability of PVC. The melt flow of PVC/EVA blends containing from 4 to 30 weight percent EVA follows a simple power law between 160 and 180°C. EVA reduced the melt viscosity and enhanced processability. Blends of PVC and EVA were morphologically incompatible. The molecular weight of extruded PVC in the blends was unchanged.     

Analytical melting model for extrusion: Stress of fully compacted solid polymers

Our laboratory recently published several analytical equations that can be used to predict the melting rate of fully compacted solid polymers sliding on a heated metal surface, modeling the melting mechanism inside an extruder. These equations were obtained by seeking asymptotic solutions to the differential equations describing the melting mechanism, temperature, and shear-dependent viscosity of polymer melts. Following the same asymptotic approach, we successfully developed accompanying analytical equations for predicting the stress required to slide fully compacted solid polymers on a heated metal surface. The accuracy of these analytical stress equations was found to be reasonable, although not fully satisfactory, by comparing their predictions to the experimentally measured values. The accuracy of the stress calculation is directly related to the accuracy of the viscosity values at high shear rates. The consideration of the temperature and shear dependencies of melt viscosity is most important for accurate prediction of the stress, just as it is for the melting rate. The stress not only depends on the melt rheological properties of the polymer but also on the thermodynamic properties.     

Mathematical model and optimization of drying process for a through-circulation dryer

A mathematical model of a through-circulation dryer is proposed. This model approximates the drying time of constantrate drying and fallingrate drying processes. Based on the proposed model, the optimal drying conditions of maximizing the drying production rate in a continuous through-circulation dryer are obtained. The drying production rate, in terms of the independent operating variables, is a nonlinear objective function, and is optimized under the nonlinear inequality constraint functions by a differential algorithm.     

JackHare: a framework for SQL to NoSQL translation using MapReduce

As data exploration has increased rapidly in recent years, the datastore and data processing are getting more and more attention in extracting important information. To find a scalable solution to process the large-scale data is a critical issue in either the relational database system or the emerging NoSQL database. With the inherent scalability and fault tolerance of Hadoop, MapReduce is attractive to process the massive data in parallel. Most of previous researches focus on developing the SQL or SQL-like queries translator with the Hadoop distributed file system. However, it could be difficult to update data frequently in such file system. Therefore, we need a flexible datastore as HBase not only to place the data over a scale-out storage system, but also to manipulate the changeable data in a transparent way. However, the HBase interface is not friendly enough for most users. A GUI composed of SQL client application and database connection to HBase will ease the learning curve. In this paper, we propose the JackHare framework with SQL query compiler, JDBC driver and a systematical method using MapReduce framework for processing the unstructured data in HBase. After importing the JDBC driver to a SQL client GUI, we can exploit the HBase as the underlying datastore to execute the ANSI-SQL queries. Experimental results show that our approaches can perform well with efficiency and scalability.