Influence of A-site Ba substitution on microwave dielectric properties of (BaxMg1−x)(A0.05Ti0.95)O3 (A=Zr,Sn) ceramics

The microwave dielectric properties of (Ba_xMg_1−x)(A_0.05Ti_0.95)TiO₃ (A=Zr, Sn) ceramics were investigated with regard to substitution of Ba for Mg of A-site. The microwave dielectric properties were correlated with the Ba content. With an increase in Ba content from 0.01 to 0.1, the dielectric constant and the τ_f value increased, but the Q×f value decreased. The sintered (Ba_xMg_1−x)(Zr_0.05Ti_0.95)TiO₃ (called B_xMZT) ceramics had a permittivity in the range of 19.1−20.6, quality factor from 180,000 to 25,000 GHz, and variation in temperature coefficient of resonant frequency from −35 to −39 ppm/°C with increasing composition x. For sintered (Ba_xMg_1−x)(Sn_0.05Ti_0.95)TiO₃ (called B_xMST) ceramics, the dielectric constant increased from 19 to 20.5, Q×f value increased from 120,000 to 37,000 (GHz), and the τ_f value increased from −50 to −3.3 ppm/°C as the x increased from 0.01 to 0.1. When A=Sn and x=0.1, (Ba_0.1Mg_0.9)(Sn_0.05Ti_0.95)TiO₃ ceramics exhibited dielectric constant of 20.5, Q×f value of 37,000 (GHz), and a near-zero τ_f value of −3.3 ppm/°C sintered at 1210 °C for 4 h.     

Emergence of Ag particles and their effects on the mechanical properties of TaN-Ag nanocomposite thin films

TaN-Ag nanocomposite films were deposited by reactive co-sputtering on tool steel substrates. The films were then annealed using RTA (Rapid Thermal Annealing) at 350 °C for 2, 4, 8 min respectively to induce the nucleation and growth of Ag particles in TaN matrix and on film surface. C-AFM (Conductive Atomic force Microscopy) and FESEM (Field-Emission Scanning Electron Microscopy) were applied to examine the Ag nano-particles emerged on the surface of these thin films. A nano-indenter and a pin-on-disk tribometer were used to study the effect of annealing on the films' mechanical properties. The results reveal that annealing by RTA can cause Ag nano-particles to emerge on the TaN surface. Consequently, the mechanical properties of the films will vary depending on annealing conditions, Ag content, and Ag particle emergence.     

Modelling complex manufacturing systems using discrete event simulation

This paper presents an approach in simulating complex manufacturing systems. The approach is founded on developing several general purpose simulation generators for an assembly station, a manufacturing cell, and an inventory transfer function. These simulation generators can then be linked together to create a model of a complex manufacturing system. A typical manufacturing system is modelled using these simulation generators and the results summarized.     

Facilitation of consumer loyalty toward branded applications: The dual-route perspective

Although many brands develop mobile applications (apps) to build relationships with consumers, most branded apps fail to retain consumers’ loyalty. This study examines the facilitation of consumer loyalty toward branded apps (continuance intention, in-app purchase intention, and word-of-mouth intention) from the dual-route perspective. One route is the affective (relationship) route, where brand benefits (functional benefits, experiential benefits, symbolic benefits, and monetary benefits) drive parasocial interactions between consumers and the brand, which, in turn, influences branded app loyalty. The other route is the utility route, where system characteristics (system quality and information quality) affect perceived usefulness, which, in turn, facilitates branded app loyalty. An online survey was conducted, and the research model was empirically tested using partial least squares structural equation modeling. The findings support the dual-route perspective according to which both affective and utilitarian paths facilitate branded app loyalty. The key theoretical contribution of this study is that it moves beyond the utilitarian path and finds the affective (relationship) path to give a more complete picture of the facilitation of consumer loyalty in the branded app context. A strategy is provided to suggest to practitioners how to design branded apps to facilitate consumer loyalty.     

Comprehensiveness and uniqueness of commercial databases and open access systems

Scientometrics - In this study, scholarly communication systems provided by commercial services and open access systems are examined on the basis of the comprehensiveness and uniqueness of their...     

Physical and chemical properties and adsorption type of activated carbon prepared from plum kernels by NaOH activation

Activated carbon was prepared from plum kernels by NaOH activation at six different NaOH/char ratios. The physical properties including the BET surface area, the total pore volume, the micropore ratio, the pore diameter, the burn-off, and the scanning electron microscope (SEM) observation as well as the chemical properties, namely elemental analysis and temperature programmed desorption (TPD), were measured. The results revealed a two-stage activation process: stage 1 activated carbons were obtained at NaOH/char ratios of 0-1, surface pyrolysis being the main reaction; stage 2 activated carbons were obtained at NaOH/char ratios of 2-4, etching and swelling being the main reactions. The physical properties of stage 2 activated carbons were similar, and specific area was from 1478 to 1887m(2)g(-1). The results of reaction mechanism of NaOH activation revealed that it was apparently because of the loss ratio of elements C, H, and O in the activated carbon, and the variations in the surface functional groups and the physical properties. The adsorption of the above activated carbons on phenol and three kinds of dyes (MB, BB1, and AB74) were used for an isotherm equilibrium adsorption study. The data fitted the Langmuir isotherm equation. Various kinds of adsorbents showed different adsorption types; separation factor (R(L)) was used to determine the level of favorability of the adsorption type. In this work, activated carbons prepared by NaOH activation were evaluated in terms of their physical properties, chemical properties, and adsorption type; and activated carbon PKN2 was found to have most application potential.     

Isolated-utterance speech recognition using hidden Markov modelswith bounded state durations

Hidden Markov models (HMMs) with bounded state durations (HMM/BSD) are proposed to explicitly model the state durations of HMMs and more accurately consider the temporal structures existing in speech signals in a simple, direct, but effective way. A series of experiments have been conducted for speaker dependent applications using 408 highly confusing first-tone Mandarin syllables as the example vocabulary. It was found that in the discrete case the recognition rate of HMM/BSD (78.5%) is 9.0%, 6.3%, and 1.9% higher than the conventional HMMs and HMMs with Poisson and gamma distribution state durations, respectively. In the continuous case (partitioned Gaussian mixture modeling), the recognition rates of HMM/BSD (88.3% with 1 mixture, 88.8% with 3 mixtures, and 89.4% with 5 mixtures) are 6.3%, 5.0%, and 5.5% higher than those of the conventional HMMs, and 5.9% (with 1 mixture), 3.9% (with 3 mixtures) and 3.1% (with 1 mixture), 1.8% (with 3 mixtures) higher than HMMs with Poisson and gamma distributed state durations, respectively     

Design of linear phase FIR filters using fractional derivative constraints

In this paper, the designs of linear phase FIR filters using fractional derivative constraints are investigated. First, the definition of fractional derivative is reviewed briefly. Then, the linear phase FIR filters are designed by minimizing integral squares error under the constraint that the ideal response and actual response have several same fractional derivatives at the prescribed frequency point. Next, the fractional maximally flat FIR filters are designed by letting the number of fractional derivative constraints be equal to the number of filter coefficients. Finally, numerical examples are demonstrated to show that the proposed method has larger design flexibility than the conventional integer derivative constrained methods.     

Initial and boundary conditions in multidimensional wave digital filter algorithms for plate vibration

Recently, multidimensional wave digital filter (MDWDF) structures have been proposed for the modeling of plate vibration problems. In this paper, we discuss how initial and boundary conditions may be properly embedded into such an algorithm in terms of the state quantities that are an integral part of the algorithm. Due to the essential feature of fully-local interconnectivity in the MDWDF model, different types of boundary conditions can be easily satisfied in a very simple and efficient manner. Instead of remodifying the whole algorithm, usually required by finite elements based methods, boundary conditions in terms of state outputs are simply attached to the model. This feature is especially useful when dealing with the mixed-edges boundary conditions frequently encountered in practice. Graphical results obtained from implementing the MDWDF algorithm are given to further demonstrate the capacities of the method in efficiently handling a fourth-order Mindlin plate vibration system with various types of boundary conditions.