Heat evolution of high-volume fly ash concrete

In this paper, the results of a laboratory investigation conducted with heat evolution of high-volume fly ash (HVFA) concrete are presented. Heat evolution of concrete was studied by measuring the temperature increase in concrete under adiabatic curing condition. Characteristic of heat evolution of fly ash concrete was found to be strongly dependent on the replacement level of fly ash and dosage of superplasticizer used to maintain workability. It was also found that using fly ash as cement replacement resulted in a reduction on the maximum temperature rise. Increasing the replacement level of fly ash caused lower temperature rise in concrete. Superplasticizer caused a delay in peak temperature rise time; this is taken as an indicator that high-dosage superplasticizer used in concrete caused retardation in hydration of cement. Concretes having similar ingredients showed similar peak temperature rise whether they are superplasticized or not.     

Lipid peroxidation and antioxidant system changes in acute L-arginine pancreatitis in rats

The World Wide Web-based form is a promising method for the construction of an on-line data collection system for clinical and epidemiological research. It is, however, laborious to prepare a common gateway interface (CGI) program for each project, which the World Wide Web server needs to handle the submitted data. In medicine, it is even more laborious because the CGI program must check deficits, type, ranges, and logical errors (bad combination of data) of entered data for quality assurance as well as data length and meta-characters of the entered data to enhance the security of the server. We have extended the specification of the hypertext markup language (HTML) form to accommodate information necessary for such data checking and we have developed software named AUTOFORM for this purpose. The software automatically analyzes the extended HTML form and generates the corresponding ordinary HTML form, 'Makefile', and C source of CGI programs. The resultant CGI program checks the entered data through the HTML form, records them in a computer, and returns them to the end-user. AUTOFORM drastically reduces the burden of development of the World Wide Web-based data entry system and allows the CGI programs to be more securely and reliably prepared than had they been written from scratch.     

Effects of preload, afterload and inotropy on dynamics of ischemic segmental wall motion

OBJECTIVES: This study sought to explore the separate and combined effects of changes in preload, afterload and contractility on the dynamics of systolic bulging. BACKGROUND: The extent of ischemic systolic bulging has been shown to be mechanically disadvantageous to left ventricular pump performance. The factors that determine ischemic segmental wall motion have not been systematically studied. METHODS: Fourteen beagles were instrumented with sonomicrometers, micromanometer pressure gauges and a balloon in the inferior vena cava. Regional function was evaluated before and after 90 s of proximal left circumflex coronary artery occlusion. Occlusions were repeated after increasing systolic pressure by 5 to 10 (afterload I) and 15 to 20 mm Hg (afterload II) with graded aortic occlusion during inotropic stimulation with dobutamine (2.5 and 5 micrograms/kg body weight per min intravenously), with simultaneous 5 micrograms/kg per min dobutamine infusion and afterload II and during 2.5% halothane (negative inotrope) concentration. A 20-min recovery period was allowed between each stage of the experiment so that regional function returned to its preocclusion level. Ischemic wall motion was characterized by percent systolic bulging and its peak positive systolic lengthening rate (+dL/dt). RESULTS: Because bulging is markedly influenced by regional preload, systolic bulging was characterized over a wide range of end-diastolic lengths of the ischemic segment during caval balloon occlusion. During each intervention, a decrease in regional preload increased the extent of percent systolic bulging. This preload dependency was more pronounced with dobutamine infusions. An increase in afterload was not associated with increased percent systolic bulging at any given preload. At a predetermined preload, bulging was not appreciably altered when an increase in left ventricular systolic pressure was not associated with a change in peak positive first derivative of left ventricular pressure (+dP/dt) but was significantly worse when peak +dP/dt increased. Dobutamine caused a dose-dependent increase in percent systolic bulging and peak +dL/dt that was positively correlated with peak +dP/dt. CONCLUSIONS: By using different loading and inotropic interventions and analyzing the regional wall motion behavior over a range of regional preloads, we can conclude that preload and rate of pressure (tension) development are the principal determinants of systolic bulging. Increases in left ventricular pressure alone had a minimal effect on systolic bulging.     

Signals,timers, and continuations for multithreaded user‐level protocols

Precise timing and asynchronous I/O are appealing features for many applications. Unix kernels provide such features on a per‐process basis, using signals to communicate asynchronous events to applications. Per‐process signals and timers are grossly inadequate for complex multithreaded applications that require per‐thread signals and timers that operate at finer granularity. To respond to this need, we present a scheme that integrates asynchronous (Unix) signals with user‐level threads, using the ARIADNE system as a platform. This is done with a view towards support for portable, multithreaded, and multiprotocol distributed applications, namely the CLAM (connectionless, lightweight, and multiway) communications library. In the same context, we propose the use of continuations as an efficient mechanism for reducing thread context‐switching and busy‐wait overheads in multithreaded protocols. Our proposal for integrating timers and signal‐handling mechanisms not only solves problems related to race conditions, but also offers an efficient and flexible interface for timing and signalling threads. Copyright © 2006 John Wiley & Sons, Ltd.     

Loss of endogenous mouse mammary tumor virus superantigen increases tumor resistance

From a cross between a tumor-susceptible mouse strain (DBA/2; D) and a tumor-resistant MHC-identical strain (B10.D2; D2) new recombinant inbred mouse strains were established over many generations of inbreeding and tumor resistance selection. Since resistance to the highly metastatic DBA/2 lymphoma variant ESb had an immunologic basis, and the two parental strains differed in endogenous viral superantigens (vSAGs), DNA of three D2 x D recombinant inbred mouse lines was typed for endogenous mouse mammary tumor viruses using mouse mammary tumor virus long terminal repeat- and env gene-specific probes. The resistant D2 x D mice were very similar to the susceptible parental strain D in their Mtv Southern blots, except for the lack of a single band corresponding to Mtv-7, the provirus coding for the strong DBA/2 superantigen Mls-1a. A backcross analysis revealed that Mtv-7-negative F2 mice were significantly more resistant than Mtv-7-positive F2 mice. When Mtv-7 was reintroduced into the resistant lines by crossing them with either CBA/J or BALB/D2.Mls-1a, the mice became again more tumor susceptible. Finally, we demonstrate the ability to transfer immunoresistance and graft-vs-leukemia reactivity from tumor-resistant to tumor-susceptible mice.