X-ray microtomography shows pore structure and tortuosity in alkali-activated binders

Durability of alkali-activated binders is of vital importance in their commercial application, and depends strongly on microstructure and pore network characteristics. X-ray microtomography (μCT) offers, for the first time, direct insight into microstructural and pore structure characteristics in three dimensions. Here, μCT is performed on a set of sodium metasilicate-activated fly ash/slag blends, using a synchrotron beamline instrument. Segmentation of the samples into pore and solid regions is then conducted, and pore tortuosity is calculated by a random walker method. Segmented porosity and diffusion tortuosity are correlated, and vary as a function of slag content (slag addition reduces porosity and increases tortuosity), and sample age (extended curing gives lower porosity and higher tortuosity). This is particularly notable for samples with ≥ 50% slag content, where a space-filling calcium (alumino)silicate hydrate gel provides porosity reductions which are not observed for the sodium aluminosilicate (‘geopolymer’) gels which do not chemically bind water of hydration.     

Chitosan effects on glass matrices evaluated by biomaterial. MAS-NMR and biological investigations

Bioactive glass 46S6 and biodegradable therapeutic polymer (Chitosan: CH) have been elaborated to form 46S6-CH composite by freeze-drying process. The kinetics of chemical reactivity and bioactivity at the surface were investigated by using physicochemical techniques, particularly solid-state MAS-NMR. Immortalized cell line used to construct multicellular spheroids was employed as three-dimensional (3D) cell cultures for in vitro studies. Obtained results showed a novel structure of the composite; the chemical treatment (ultrasound, magnetic stirring, freeze drying process and lyophilization) led the bioactive glass particles to be loaded in the chitosan-based materials. ²⁹Si and ³¹P MAS-NMR results showed the emergence of two new species, Q _Si ³ (OH) and Q _Si ⁴ , which are characteristic of the vitreous network dissolution in simulated body fluid (SBF). MAS-NMR also confirmed the formation of amorphous calcium phosphate (ACP) at the surface of the initial 46S6-CH. Three-dimensional (3D) cell cultures highlighted the effect of chitosan, where the cell viability reached up to 78% in 46S6-CH composite and up to 67% in 46S6. The association of (CH) and bioactive glass (BG) matrix promotes a highly significant bioactivity, demonstrating surface bone formation and satisfactory behavior in biological environment.     

Dietary intakes and food sources of fat and fatty acids in Guatemalan schoolchildren: A cross-sectional study

Background  

Consumption of healthy diets that contribute with adequate amounts of fat and fatty acids is needed for children. Among Guatemalan children, there is little information about fat intakes. Therefore, the present study sought to assess intakes of dietary fats and examine food sources of those fats in Guatemalan children.     

Hydroxytelechelic hydrocarbon copolymers with high aging resistance for elastomeric materials

Dihydroxytelechelic copolyalkenamers were prepared via metathetical polymerization of cyclic olefins (cyclooctadiene, cyclooctene and cyclododecene) in presence of first generation Grubbs catalyst and butene diacetate as functionalizing chain transfer agent in order to study their aging resistance. The influence of compositions and molar masses of the copolyalkenamers were investigated in terms of thermo‐mechanical properties. Increasing chains length or the proportion of polycyclooctadiene allow to get non‐cristalline polymers. Low T_g materials (between ?78°C and ?108°C) were prepared. The resistance towards oxidation of the different copolyalkenamers was carried out using a viscosity measurement method. A critical time, corresponding to a brutal increase of the apparent viscosity, was related to degradation of the polymers and was shown to be dependent on the Csp² proportion in the structure. The absence of vinylic units and the decrease of the double bonds content within the copolymers were proved to enhance the stability of the copolyalkenamers towards aging resistance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

PCA3 and PCA3-Based Nomograms Improve Diagnostic Accuracy in Patients Undergoing First Prostate Biopsy

While now recognized as an aid to predict repeat prostate biopsy outcome, the urinary PCA3 (prostate cancer gene 3) test has also been recently advocated to predict initial biopsy results. The objective is to evaluate the performance of the PCA3 test in predicting results of initial prostate biopsies and to determine whether its incorporation into specific nomograms reinforces its diagnostic value. A prospective study included 601 consecutive patients addressed for initial prostate biopsy. The PCA3 test was performed before ≥12-core initial prostate biopsy, along with standard risk factor assessment. Diagnostic performance of the PCA3 test was evaluated. The three available nomograms (Hansen’s and Chun’s nomograms, as well as the updated Prostate Cancer Prevention Trial risk calculator; PCPT) were applied to the cohort, and their predictive accuracies were assessed in terms of biopsy outcome: the presence of any prostate cancer (PCa) and high-grade prostate cancer (HGPCa). The PCA3 score provided significant predictive accuracy. While the PCPT risk calculator appeared less accurate; both Chun’s and Hansen’s nomograms provided good calibration and high net benefit on decision curve analyses. When applying nomogram-derived PCa probability thresholds ≤30%, ≤6% of HGPCa would have been missed, while avoiding up to 48% of unnecessary biopsies. The urinary PCA3 test and PCA3-incorporating nomograms can be considered as reliable tools to aid in the initial biopsy decision.     

Polymer stain resistance: Prediction versus experiment

The coloration of different polymer films (from commodity and packaging films to performance films) by contact with various food coloring substances was evaluated. For this purpose, both solubility parameters as a prediction tool, and immersion experiments for time range between 24 and 1000 h were established. The two predicting tools are the Hoy and Hoftyzer‐Van Krevelen (HVK) methods. For PE and PP, HVK's method is preferred for predicting coloration. Neither of the HVK's and Hoy's methods was able to establish a coloration prediction for PET while both methods could predict the staining of PEEK. The coloration of partially and fully fluorinated polymers is well predicted by the Hoy's method. The behavior of PP/PA and PP/PA/PP multilayer films was also studied. Crystallinity degree of polymers, temperature and concentration of coloring molecules are also important parameters, which are not taken into account in solubility theories. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Modelling and measurements of the velocity gradient and local flow direction at the pore scale of a packed bed

In a packed bed with single phase liquid flow, velocity gradient and local flow direction are measured at the pore scale using tri-segmented microelectrodes flush mounted at the surface of a sphere equator area. The experimental measurements are compared to numerical predictions deduced from the solution of a 3D model based on continuity and momentum balance equations.