Strategies in environmental education

The causes of environmental changes, including climate, are neither fully understood nor identified, nor do scientists agree about their nature. Yet, their impact is such that action cannot be delayed. This involves spreading public awareness through environmental education and sensitization. Hence a need to reach, to educate the poorly informed public at large. With the classroom as the base, “town meetings” and eco‐tourism may constitute potentially useful approaches towards that goal.     

Assessing Grey Squirrel Dispersal Patterns within the Landscape Using Sequence Variation

Abstract

The grey squirrel Sciurus carolinensis is thought to have contributed to the decline of red squirrel S. vulgaris populations in the UK through resource competition and disease spread. This study used mtDNA sequencing to assess patterns of grey squirrel dispersal in the UK. Patterns of genetic variation within the dloop sequence were characterised for seven grey squirrel populations. Infiltration directions and potential barriers to dispersal are identified and discussed, with a focus on Cumbria, a county at the forefront of grey squirrel expansion. Understanding the dynamics of grey squirrel dispersal will aid their management at a landscape scale and enhance the conservation of red squirrels.     

N‐Benzyl‐4‐((heteroaryl)methyl)benzamides: A New Class of Direct NADH‐Dependent 2‐trans Enoyl–Acyl Carrier Protein Reductase (InhA) Inhibitors with Antitubercular Activity

Isoniazid (INH) remains one of the cornerstones of antitubercular chemotherapy for drug‐sensitive strains of M. tuberculosis bacteria. However, the increasing prevalence of multidrug‐resistant (MDR) and extensively drug‐resistant (XDR) strains containing mutations in the KatG enzyme, which is responsible for the activation of INH into its antitubercular form, have rendered this drug of little or no use in many cases of drug‐resistant tuberculosis. Presented herein is a novel family of antitubercular direct NADH‐dependent 2‐trans enoyl–acyl carrier protein reductase (InhA) inhibitors based on an N‐benzyl‐4‐((heteroaryl)methyl)benzamide template; unlike INH, these do not require prior activation by KatG. Given their direct InhA target engagement, these compounds should be able to circumvent KatG‐related resistance in the clinic. The lead molecules were shown to be potent inhibitors of InhA and showed activity against M. tuberculosis bacteria. This new family of inhibitors was found to be chemically tractable, as exemplified by the facile synthesis of analogues and the establishment of structure–activity relationships. Furthermore, a co‐crystal structure of the initial hit with the enzyme is disclosed, providing valuable information toward the design of new InhA inhibitors for the treatment of MDR/XDR tuberculosis.     

Nitroarenes as Antitubercular Agents: Stereoelectronic Modulation to Mitigate Mutagenicity

Nitroarenes are less preferred in drug discovery due to their potential to be mutagenic. However, several nitroarenes were shown to be promising antitubercular agents with specific modes of action, namely, nitroimidazoles and benzothiazinones. The nitro group in these compounds is activated through different mechanisms, both enzymatic and non‐enzymatic, in mycobacteria prior to binding to the target of interest. From a whole‐cell screening program, we identified a novel lead nitrobenzothiazole (BT) series that acts by inhibition of decaprenylphosphoryl‐β‐d ‐ribose 2′‐epimerase (DprE1) of Mycobacterium tuberculosis (Mtb). The lead was found to be mutagenic to start with. Our efforts to mitigate mutagenicity resulted in the identification of 6‐methyl‐7‐nitro‐5‐(trifluoromethyl)‐1,3‐benzothiazoles (cBTs), a novel class of antitubercular agents that are non‐mutagenic and exhibit an improved safety profile. The methyl group ortho to the nitro group decreases the electron affinity of the series, and is hence responsible for the non‐mutagenic nature of these compounds. Additionally, the co‐crystal structure of cBT in complex with Mtb DprE1 established the mode of binding. This investigation led to a new non‐mutagenic antitubercular agent and demonstrates that the mutagenic nature of nitroarenes can be solved by modulation of stereoelectronic properties.     

Properties of phyllosilicate-based porous ceramics shaped by conventional tape casting and freeze tape casting

Silicate ceramics were shaped using tape casting (TC) and freeze tape casting (FTC) processes from three clays labeled HCR, KORS, and KCR. These clays exhibited mass content of 77% halloysite–10 Å, 29% kaolinite, and 98% kaolinite minerals, respectively. After casting the slurries, the dried tapes were sintered at 1200°C. The microstructure changes were characterized before and after sintering using scanning electron microscopy. The apparent porosity of TC samples was lower (36–47 vol.%) compared to values obtained with FTC samples (67–79 vol.%). The latter samples exhibited a highly textured porosity, with micron-sized pores aligned perpendicular to the tape surfaces. Upon sintering, the porosity of TC samples tended to decrease conversely to the case of FTC samples. Such behavior seemed related to the simultaneous effect of organic additives and ice templating. Consequently, the FTC samples showed a relatively low mechanical strength of 3–7 MPa and thermal conductivity of .14– .22 W m⁻¹ K⁻¹. After sintering, the mullite crystallization contributed to strengthen the bulk materials, helping to compensate for the detrimental effect of porosity on the stress to rupture and on thermal conductivity values.     

Mass Spectrometric Assays Reveal Discrepancies in Inhibition Profiles for the SARS-CoV-2 Papain-Like Protease

The two SARS-CoV-2 proteases, i. e. the main protease (M^pro) and the papain-like protease (PL^pro), which hydrolyze the viral polypeptide chain giving functional non-structural proteins, are essential for viral replication and are medicinal chemistry targets. We report a high-throughput mass spectrometry (MS)-based assay which directly monitors PL^pro catalysis in vitro. The assay was applied to investigate the effect of reported small-molecule PL^pro inhibitors and selected M^pro inhibitors on PL^pro catalysis. The results reveal that some, but not all, PL^pro inhibitor potencies differ substantially from those obtained using fluorescence-based assays. Some substrate-competing M^pro inhibitors, notably PF-07321332 (nirmatrelvir) which is in clinical development, do not inhibit PL^pro. Less selective M^pro inhibitors, e. g. auranofin, inhibit PL^pro, highlighting the potential for dual PL^pro/M^pro inhibition. MS-based PL^pro assays, which are orthogonal to widely employed fluorescence-based assays, are of utility in validating inhibitor potencies, especially for inhibitors operating by non-covalent mechanisms.     

Design and Laboratory Evaluation of a Sequential Spot Sampler for Time-Resolved Measurement of Airborne Particle Composition

A new sampling approach has been developed to enable affordable, time-resolved monitoring of particulate chemical composition, and more generally to provide concentrated samples of airborne particles. Using a newly developed, moderated water-based condensational growth technology, individual particle samples are deposited in a 1-mm diameter dry “spot.” The moderated condensation technology enables this collection with minimal temperature rise, providing robust collection for volatile constituents. Measured collection efficiencies are above 95% for particles in the size range from 0.010 μm to 2.5 μm. A set of 20 or more time-resolved samples, plus blanks, may be collected onto a multiwell collection plate. For chemical analysis the plate is returned to the laboratory, and placed directly into a modified autosampler, without extraction or preparation. The autosampler handles the addition of eluent, extraction, and sample injection without user manipulation. This article presents the design and laboratory evaluation of a 1.5 L/min sampling rate version of this system.

Copyright 2014 American Association for Aerosol Research     

Optimized silyl ester diblock methacrylic copolymers: A new class of binders for chemically active antifouling coatings

This work focuses on the assessment of the erosion properties and antifouling (AF) performance of silyl ester copolymer-based coatings through laboratory and field tests. Silyl ester diblock copolymers were synthesized via the reversible addition-fragmentation chain transfer polymerization and were selected as binders for developing copper-free chemically active coatings. AF coatings were subsequently prepared using biocides (Sea-Nine™ 211, Preventol^® A4S, and zinc pyrithione). Laboratory-based bioassays, targeting the growth of selected microorganisms (bacteria and microalgae) and barnacle settlement, highlighted that the silyl ester methacrylic-based binders did not inhibit the growth of microorganisms, are essentially non-toxic to nauplii and reduced the settlement of Amphibalanus amphitrite cyprids. The corresponding biocidal coatings are potent toward bacteria and diatoms but were demonstrated to be toxic against the barnacle larvae. Field test results showed variations with geographical locations: in sub-tropical area, the silyl ester methacrylic-based coatings failed to inhibit the settlement of barnacles; however, field tests performed in Mediterranean Sea for 18 months demonstrated that biocidal silyl ester methacrylic-based coatings were promising candidates.