Distribution and identification of culturable airborne microorganisms in a Swiss milk processing facility

Airborne communities (mainly bacteria) were sampled and characterized (concentration levels and diversity) at 1 outdoor and 6 indoor sites within a Swiss dairy production facility. Air samples were collected on 2 sampling dates in different seasons, one in February and one in July 2012 using impaction bioaerosol samplers. After cultivation, isolates were identified by mass spectrometry (matrix-assisted laser desorption/ionization-time-of-flight) and molecular (sequencing of 16S rRNA and rpoB genes) methods. In general, total airborne particle loads and total bacterial counts were higher in winter than in summer, but remained constant within each indoor sampling site at both sampling times (February and July). Bacterial numbers were generally very low (<100 cfu/m³ of air) during the different steps of milk powder production. Elevated bacterial concentrations (with mean values of 391 ± 142 and 179 ± 33 cfu/m³ of air during winter and summer sampling, respectively; n = 15) occurred mainly in the “logistics area,” where products in closed tins are packed in secondary packaging material and prepared for shipping. However, total bacterial counts at the outdoor site varied, with a 5- to 6-fold higher concentration observed in winter compared with summer. Twenty-five gram-positive and gram-negative genera were identified as part of the airborne microflora, with Bacillus and Staphylococcus being the most frequent genera identified. Overall, the culturable microflora community showed a composition typical and representative for the specific location. Bacterial counts were highly correlated with total airborne particles in the size range 1 to 5 µm, indicating that a simple surveillance system based upon counting of airborne particles could be implemented. The data generated in this study could be used to evaluate the effectiveness of the dairy plant’s sanitation program and to identify potential sources of airborne contamination, resulting in increased food safety.     

Analyzing visually impaired people’s touch gestures on smartphones

Multimedia Tools and Applications - We present an analysis of how visually impaired people perform gestures on touch-screen smartphones and report their preferences, explaining the procedure and...     

Experimental study on micro manufacturing of carbon nanotube (CNT) plastic composites

In recent years, innovative materials such as carbon nanotube composites are finding growing interest in several industrial sectors, from sports and leisure to electronics, automotive, aircraft, and defence. The reinforcing influence of the carbon nanotube is of prime interest. However, technological issues concerning the production methods and the manufacturing processes of carbon nanotube components limit the industrial application of this innovative and interesting material, especially whether small features are required. For this reason, manufacturing strategy involving new production technologies must be designed and developed. This paper studies the challenges of a manufacturing chain based on two manufacturing processes: injection moulding and micro milling. A case study based on these innovative processes is reported and discussed. The propagation chain effect and the influence of each considered process parameter on cutting force and geometrical accuracy of the features (the key characteristics of the process chain) were assessed by means of statistical analysis of variance (ANOVA). The ANOVA analysis demonstrated that cutting forces in micro milling are mainly influenced by the material and percentage of carbon nanotubes, while the main parameter influencing the geometrical accuracy of micro features is the matrix material.     

Geranylgeraniol and Neurological Impairment: Involvement of Apoptosis and Mitochondrial Morphology

Deregulation of the cholesterol pathway is an anomaly observed in human diseases, many of which have in common neurological involvement and unknown pathogenesis. In this study we have used Mevalonate Kinase Deficiency (MKD) as a disease-model in order to investigate the link between the deregulation of the mevalonate pathway and the consequent neurodegeneration. The blocking of the mevalonate pathway in a neuronal cell line (Daoy), using statins or mevalonate, induced an increase in the expression of the inflammasome gene (NLRP3) and programmed cell death related to mitochondrial dysfunction. The morphology of the mitochondria changed, clearly showing the damage induced by oxidative stress and the decreased membrane potential associated with the alterations of the mitochondrial function. The co-administration of geranylgeraniol (GGOH) reduced the inflammatory marker and the damage of the mitochondria, maintaining its shape and components. Our data allow us to speculate about the mechanism by which isoprenoids are able to rescue the inflammatory marker in neuronal cells, independently from the block of the mevalonate pathway, and about the fact that cell death is mitochondria-related.     

Preparation and characterization of light‐cured methacrylate/montmorillonite nanocomposites

Polymer/clay nanocomposites were prepared from dimethacrylate monomers, commonly used in dental restorative resins, and an organically modified silicate (montmorillonite). The photopolymerization process was hardly affected by the presence of the silicate filler, and thus 2 mm thick samples containing 3 wt% clay were extensively cured. Transmission electron microscopy revealed that the montmorillonite platelets were either intercalated or exfoliated. Nevertheless, for all formulations, intermediate‐sized aggregates of about 1 µm were present and their fraction increased as the amount of filler increased. The presence of the clay was found to have no major effect on the flexural modulus and compressive yield strength of the nanocomposites. Moreover, the water uptake of nanocomposites containing 3 wt% clay was about 10–15% higher than that of unfilled monomers. Modification of the clay surface with alternative organic cations is certainly necessary in order to achieve an optimal dispersion of the clay in the polymer matrix. Copyright © 2010 Society of Chemical Industry     

Gb3 Glycosphingolipids with Fluorescent Oligoene Fatty Acids: Synthesis and Phase Behavior in Model Membranes

Glycosphingolipids are involved in a number of physiological and pathophysiological processes, and they serve as receptors for a variety of bacterial toxins and viruses. To investigate their function in lipid membranes, fluorescently labeled glycosphingolipids are highly desirable. Herein, a synthetic route to access Gb₃ glycosphingolipids with fluorescently labeled fatty acids, consisting of pentaene and hexaene moieties either at the terminus or in the middle of the acyl chain, has been developed. The fluorescent properties of the Gb₃ derivatives were investigated in small unilamellar vesicles composed of a raft-like mixture. Phase-separated giant unilamellar vesicles (GUVs) allowed the quantification of the apparent partitioning coefficients of the Gb₃ compounds by means of confocal fluorescence laser scanning microscopy. The determined partition coefficients demonstrate that the Gb₃ derivatives are preferentially localized in the liquid-disordered (l_d) phase. To analyze whether the compounds behave like their physiological counterparts, Cy3-labeled (Cy: cyanine) Shiga toxin B subunits (STxB) were specifically bound to Gb₃-doped GUVs. However, the protein was favorably localized in the l_d phase, in contrast to results reported for STxB bound to naturally occurring Gb₃, which is discussed in terms of the packing density of the lipids in the liquid-ordered (l_o) phase.     

Cheaper membrane materials for microalgae dewatering

Among different strategies to reduce costs in microalgae dewatering process via cross-flow filtration, the one related to membrane material was investigated in order to be decreased. Several materials were tested, starting with the ones commonly used in membrane technology [ceramic, polysulfone (PSf) and polyacrylonitrile (PAN)] to the ones generally employed in packaging industry [acrylonitrile butadiene styrene (ABS), glycol-modified polyethylene terephthalate (PETG) and polylactic acid (PLA)], the latter being considerably cheaper. Experiments carried out showed promising results in terms of permeabilities for PSf–Pluronic^® F127 blended membranes and PAN membranes (11 ± 1 L/h/m²/bar and 22 ± 1 L/h/m²/bar, respectively, instead of 2 ± 2 L/h/m²/bar of PSf membranes), but with high related costs. PLA membranes showed good mechanical properties, biodegradability and price, but low permeability values (5 ± 1 L/h/m²/bar). PETG membranes showed attractive results in terms of costs and permeability, but poor mechanical properties. The polymer that offered the best results was the ABS that reached membrane permeabilities of 19 ± 1 L/h/m²/bar, maintaining good mechanical properties while filtering the microalgae Phaeodactylum tricornutum Bohlin. Thus, a novel functionality was found for these not so common polymers in microalgae dewatering. This indicates that use of these materials could also be considered in other aqueous micro/ultrafiltration applications. In addition, the biodegradable PLA polymer introduces a new concept of cheap and environmental friendly membrane in this application.     

Influence of the reaction time and the Triton x-100/Cyclohexane/Methanol/H2O ratio on the morphology and size of silica nanoparticles synthesized via sol–gel assisted by reverse micelle microemulsion

The present paper describes the synthesis of silica nanoparticles via the sol–gel method assisted by reverse micelle microemulsion, using reagents as Triton x-100/Cyclohexane/Methanol/H₂O, and also the effect on particle size of some synthesis parameters such as the water-surfactant molar ratio (R), Co-surfactant-surfactant (ρ), and synthesis time (t). The structure, morphology, and size of the silica nanoparticles were characterized with transmission electron microscopy and scanning electron microscopy. A variation of ρ = [Methanol]/[Triton X-100] affects the size, morphology, and dispersion of the particles. An increase in the concentration of methanol produces a decrease in particle size. The condition that resulted in smaller particle size, better spherical morphology, and monodispersity was when ρ = 7.6, which generated an approximate size of 83 ± 7 nm. The parameter R = [H₂O]/[Triton X-100] affects not only the size of the particles, but also their morphology. Higher values of R result in a decrease in the amount of catalyst present in the interior of the micelle, but in turn generate a greater amount of water, which results in a decrease in particle size and polydispersity. Time is a parameter that directly affects the size of the silica particles. The optimal time for the synthesis of nanoparticles was 2 h, resulting in silica nanoparticles of 25 ± 3 nm, monodisperse, with spherical morphology and without the presence of agglomerations.     

Effect of stocking density and group size on growth performance,carcass traits and meat quality of outdoor-reared rabbits

The effect of stocking density (16 rabbits/m², 5 rabbits/m², 2.5 rabbits/m², n = 60, Experiment 1) and group size (4 rabbits/cage, 8 rabbits/cage, 16 rabbits/cage, n = 88, Experiment 2) on productive performance, carcass and meat quality of a slow-growing rabbit population reared outdoors was investigated in two experiments. The highest stocking density induced the highest skin percentage. Lower stocking densities showed lower lightness of Biceps femoris and higher redness of Longissimus lumborum muscles. Four rabbits/cage group (Experiment 2) showed the highest daily weight gain and slaughter weight and the lowest skin percentage. The muscles of 16 rabbits/cage showed significantly higher pHu than 8 and 4 rabbits/cage. BF of 16 and 4 rabbits/cage showed higher L* value. Productive performance and meat quality of rabbits reared outdoors improved in low group size while stocking density needs more experiments. The best combination of density, group size and total available surface that showed the best production and carcass traits was of 5 rabbits/m², 4 rabbits/cage, and 0.8 m².