Second Life as a support element for learning electronic related subjects: A real case

Looking for more active and motivating methodological alternatives from the students’ perspective, which promote analysis and investigation abilities that make the student a more participative agent and some learning processes are facilitated, a practical study was conducted in the University of La Sabana (Chía, Colombia), in Computing Engineering (INF) and Agroindustrial Production Engineering (IPA) academic programs under the guiding question: Is Second Life an attractive tool for students, does it increment motivation, promote participation and facilitate learning processes in electronic related subjects in Engineering degrees?Second Life (SL) platform was then used as a traditional on-site class complement in electronic related subjects. A follow up was conducted with several groups during a year and a half, some students followed the subject with the traditional on-site methodology and others did it following a mixed methodology that combined traditional on-site lessons with virtual sessions trough SL, making a comparison and applying a quantitative as well as a qualitative methodology for the information analysis and recollection.After the specified study period it was found that using SL as part of the methodology, increments motivation toward electronic related subjects, and promotes participation and investigation, due to the fact that this tool makes learning possible in a funnier, more interactive and deeper way than if it had been taught in a master class. Having real-time access from a virtual classroom to all types of audiovisual information, helps more senses get involved in the learning process, making it more effective; nevertheless a weakness was detected related to the attention and concentration: students tend to get distracted, because their classroom is the computer and from there they have access not only to the many worlds of SL but to all the social networks and the Internet in general.     

The influence of virtual presence: Effects on experienced cognitive load and learning outcomes in educational computer games

Does the immersive design of an educational gaming environment affect learners’ virtual presence and how much do they learn? Does virtual presence affect learning? This study tries to answer these questions by examining the differences in virtual presence and learning outcomes in two different computer-based multimedia environments: a gaming environment with high immersive design vs. hypertext learning environment with low immersive design. As the main focus, the effect of virtual presence on learning is also explained and tested. By identifying virtual presence as a variable that may determine learning, it is argued that computer gaming environments present a new challenge for researchers to investigate, particularly, the effects of virtual presence on the immersive design of games in order to help designers to predict which instructional configurations will maximize learning performance. In general, results revealed that the high-immersive gaming environment leads to the strongest form of virtual presence but also decreased learning. Although regression analyses indicate that virtual presence positively influences trivial- and non-trivial learning outcomes, learners who learned in a low-immersive environment outperformed the gaming group. A mediation analysis showed that the relation between virtual presence and non-trivial learning outcomes is partly mediated through increased cognitive load.     

Novel 3D manufacturing method combining microelectrial discharge machining and electrochemical polishing

This paper reports on the potential of microelectrical discharge machining (μEDM) as an innovative method for the fabrication of 3D microdevices. To demonstrate the wide capabilities of μEDM two different microsystems—a microfluidic device for the dispersion of nanoparticles and a star probe for microcoordinate metrology—are presented. To gain optimized process conditions as well as a high surface quality an adequate adaption of the single erosion parameters such as energy, pulse frequency and spark gap has to be carried out and is discussed below. Thus, a surface roughness of R_a?=?80?nm is achieved at the channel bottom. The fabricated stylus elements for the star probe have sphere diameters of 40–200?μm. For further surface quality enhancement a subsequent electrochemical polishing step is investigated. In case of the dispersion micromodule a combined process chain of μEDM-milling and electropolishing has reached a surface improvement above 70%.     

Activity-rest schedules in physically demanding work and the variation of responses with age

Workers in physically demanding occupations require work breaks to recover from exertion. In a laboratory setting, we investigated the impact of ergometer cycling for 7 h in two conditions with an identical total break time but with two different activity-rest schedules. We hypothesised that more frequent but shorter breaks lead to less psychophysical strain and its effects than do less frequent but longer breaks, particularly for older workers. Twenty-nine participants representing three different age groups were tested in both conditions. Heart rate, perceived exertion/tension and feelings of fatigue were assessed and used as dependent variables. Results indicate no general activity-rest differences as well as no age-related differences of break effects under the condition of subjectively equal straining load. However, heart rate was found to be lower at some measurement points in the frequent-short-break condition and perceived exertion was lower in the infrequent-long-break condition. PRACTITIONER SUMMARY: Design of activity-rest schedules in physically demanding occupations is a key issue in the prevention of strain and hence of interest to ergonomists. Our study suggests that breaks during physically demanding work have the same effect if they are frequent and short or infrequent and long, regardless of age.     

Monitoring and improving Greek banking services using Bayesian Networks: An analysis of mystery shopping data

Mystery shopping is a well known marketing technique used by companies and marketing analysts to measure quality of service, and gather information about products and services. In this article, we analyse data from mystery shopping surveys via Bayesian Networks in order to examine and evaluate the quality of service offered by the loan departments of Greek Banks. We use mystery shopping visits to collect information about loan products and services and, by this way, evaluate the customer satisfaction and plan improvement strategies that will assist banks to reach their internal standards. Bayesian Networks not only provide a pictorial representation of the dependence structure between the characteristics of interest but also allow to evaluate, interpret and understand the effects of possible improvement strategies.     

Optimization of dc SQUID voltmeter and magnetometer circuits

We calculate the signal-to-noise ratio in a dc SQUID system as a function of source impedance, taking into account the effects of current and voltage noise sources in the SQUID. The optimization of both tuned and untuned voltmeters and magnetometers is discussed and typical sensitivities are predicted using calculated noise spectra. The calculations are based on an ideal symmetric dc SQUID with % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4baFfea0dXde9vqpa0lb9% cq0dXdb9IqFHe9FjuP0-iq0dXdbba9pe0lb9hs0dXda91qaq-xfr-x% fj-hmeGabaqaciGacaGaaeqabaWaaeaaeaaakeaacqaHYoGycqGH9a% qpcaaIYaacbaGaa8htaiaa-LeadaWgaaWcbaacbiGaa4hmaaqabaGc% caGGVaGaeuOPdy0aaSbaaSqaaiaa+bdaaeqaaOGaeyypa0JaaGymaa% aa!3D23!\[\beta = 2LI_0 /\Phi _0 = 1\] and moderate noise rounding % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4baFfea0dXde9vqpa0lb9% cq0dXdb9IqFHe9FjuP0-iq0dXdbba9pe0lb9hs0dXda91qaq-xfr-x% fj-hmeGabaqaciGacaGaaeqabaWaaeaaeaaakeaaiiGacqWFOaakcq% WFtoWrcqWF9aqpcqWFYaGmcqaHapaCcaWGRbWaaSbaaSqaaiaadkea% aeqaaGqaaOGaa4hvaiaac+cacaGFjbWaaSbaaSqaaerbbjxAHXgaiu% GacaqFWaaabeaakiab-z6agnaaBaaaleaacaqGGaacbiGaaWhmaaqa% baGccqGH9aqpcaaIWaGaaiOlaiaaicdacaaI1aGaaiykaaaa!471A!\[(\Gamma = 2\pi k_B T/I_0 \Phi _{{\rm{ }}0} = 0.05)\], where ₀ is the flux quantum, T is the temperature, L is the SQUID inductance, and I ₀ is the critical current of each junction. The optimum noise temperatures of tuned and untuned voltmeters are found to be 2.8(L/R)T and 8(L/R)T (1 + 1.5² + 0.7⁴)^1/2/² respectively, where /2 is the signal frequency, assumed to be much less than the Josephson frequency, and is the coupling coefficient between the SQUID and its input coil. It is found that tuned and untuned magnetometers can be characterized by optimum effective signal energies given by (16k _B TLE/² R)[1 + (1 + 1.5² + 0.7²)^1/2 + 0.75²] and 2k_B T _iR_iB/² L _p respectively, where B is the bandwidth, R _i is the resistance representing the losses in the tuned circuit at temperature T _i and L _p is the inductance of the pickup coil.This work was supported by the Division of Materials Sciences, Office of Basic Energy Sciences, U.S. Department of Energy, and by the U.S. Office of Naval Research.Guggenheim Fellow.     

The Value of Temptation

There is an implicit assumption in electronic commerce that induces the buyers to believe that their deals will be handled appropriately. However, after a seller has already committed to a buyer, he may be tempted by several requests though he will not be able to supply them all. We analyze markets in which a finite set of automated buyers interacts repeatedly with a finite set of automated sellers. These sellers can satisfy one buyer at a time, and they can be tempted to break a commitment they already have. We have found the perfect equilibria that exist in markets with a finite horizon, and with an unrestricted horizon. A significant result stemming from our study reveals that sellers are almost always tempted to breach their commitments. However, we also show that if markets' designers implement an external mechanism that restricts the automated buyers actions, then sellers will keep their commitments.     

A Novel Human Neutralizing mAb Recognizes Delta,Gamma and Omicron Variants of SARS-CoV-2 and Can Be Used in Combination with Sotrovimab

The dramatic experience with SARS-CoV-2 has alerted the scientific community to be ready to face new epidemics/pandemics caused by new variants. Among the therapies against the pandemic SARS-CoV-2 virus, monoclonal Antibodies (mAbs) targeting the Spike glycoprotein have represented good drugs to interfere in the Spike/ Angiotensin Converting Enzyme-2 (ACE-2) interaction, preventing virus cell entry and subsequent infection, especially in patients with a defective immune system. We obtained, by an innovative phage display selection strategy, specific binders recognizing different epitopes of Spike. The novel human antibodies specifically bind to Spike-Receptor Binding Domain (RBD) in a nanomolar range and interfere in the interaction of Spike with the ACE-2 receptor. We report here that one of these mAbs, named D3, shows neutralizing activity for virus infection in cell cultures by different SARS-CoV-2 variants and retains the ability to recognize the Omicron-derived recombinant RBD differently from the antibodies Casirivimab or Imdevimab. Since anti-Spike mAbs, used individually, might be unable to block the virus cell entry especially in the case of resistant variants, we investigated the possibility to combine D3 with the antibody in clinical use Sotrovimab, and we found that they recognize distinct epitopes and show additive inhibitory effects on the interaction of Omicron-RBD with ACE-2 receptor. Thus, we propose to exploit these mAbs in combinatorial treatments to enhance their potential for both diagnostic and therapeutic applications in the current and future pandemic waves of coronavirus.     

Printing highly efficient organic solar cells

The technological attraction in organic solar cells is their compatibility to printing processes. However, up to today, nearly no literature on "printed" organic solar cells have been published and the major body of the research work was done by spin coating or blading techniques. Transferring the spin-coating or doctor blading process currently used for the fabrication of bulk heterojunction solar cell to a printing process holds morphological challenges that have not been observed or reported up to today. We highlight these challenges and we show that inkjet printing of organic bulk heterojunction solar cells requires completely novel approaches and skill sets compared to the current state of the art. By adjusting the chemical properties of the poly(3-hexylthiophene) polymer donor and by using our recently developed inkjet solvent mixture, we have gained control over the nanomorphology of poly(3-hexylthiophene):fullerene blends during the printing process and report a new record power conversion efficiency of 3.5% for inkjet printed poly(3-hexylthiophene):fullerene based solar cells.