Enthalpies of pyrolysis and oxidation of Athabasca oil sands

Thermal degradation of Athabasca oil sands, bitumen, and its fractions have been investigated in N₂and in air, at 25–600 °C and at pressures up to 6.9 MPa, using thermogravimetry (TG) and high pressure differential scanning calorimetry (PDSC). These conditions are likely to occur during in-situ recovery of bitumen by underground combustion processes. Two regions of weight loss are detected using both gases. The endothermic low temperature volatilization reactions (150–400 °C) absorbed +26 mJ mg^?1 for oil sand to +2319 mJ mg^?1 for medium oil. The heats of reaction for high-temperature cracking and volatilization reactions (400–550 °C) were similar. The heats of reaction for the low-temperature oxidation reactions (150–375 °C) were ?405 mJ mg^?1 for oil sand to ?30200mJ mg^?1 for medium oil. Values for the high-temperature oxidation reactions (400–550 °C) were slightly higher. Increasing the pressure of nitrogen and air caused an increase in the endothermicity and exothermicity of the respective reactions.     

Molecular mass calibration in size-exclusion chromatography of coal derivatives

A number of procedures have been investigated for the calibration of a size-exclusion chromatography (s.e.c.) column in the determination of molecular mass (MM) distributions of coal derivatives. The behaviour of narrow fractions of coal extracts in the MM range 200–3000 was compared with a variety of the more generally available calibration standards. Calibration with preparative s.e.c. subfractions of materials similar to those under study has been recommended. Polystyrene standards are satisfactory, however, for MM < 1000, but above this range other polymer standards should be sought. Universal and molar volume calibration do not apply to coal-derived materials.     

SkaSim – Skalierbare HPC‐Software für molekulare Simulationen in der chemischen Industrie

This article outlines advances in molecular modeling and simulation using massively parallel high‐performance computers (HPC). In the SkaSim project, partners from the HPC community collaborated with users from science and industry. The aim was to optimize the prediction of thermodynamic property data in terms of efficiency, quality and reliability using HPC methods. In this context, various topics were dealt with: atomistic simulation of homogeneous gas bubble formation, surface tension of classical fluids and ionic liquids, multicriteria optimization of molecular models, the development of the molecular simulation codes ls1 mardyn and ms2, atomistic simulation of gas separation processes, molecular membrane structure generators, transport resistors and the evaluation of predictive property data models based on specific mixture types.     

The effect of human chorionic gonadotrophin on the expression of progesterone receptors in human luteal cells in vivo and in vitro

The human corpus luteum expresses genomic progesterone receptors (PRs) suggesting that progesterone may have an autocrine or paracrine role in luteal function. We hypothesised that the reduction in luteal PR reported in the late-luteal phase augmented progesterone withdrawal and had a role in luteolysis. We therefore tested the hypothesis that luteal rescue with human chorionic gonadotrophin (hCG) would maintain PR expression. PR was immunolocalised to different cell types in human corpora lutea (n = 35) from different stages of the luteal phase and after luteal rescue with exogenous hCG. There was no change in the staining intensity of theca-lutein cell or stromal cell PR throughout the luteal phase or after luteal rescue. In the late-luteal phase, granulosa-lutein cell PR immunostaining was reduced (P < 0.05) but the trend to reduction was also seen after luteal rescue with hCG (P = 0.055). To further investigate the effect of hCG on granulosa-lutein cell PR expression, an in vitro model system of cultured human luteinised granulosa cells was studied. Cells were cultured for 12-13 days exposed to different patterns of hCG and aminoglutethamide to manipulate progesterone secretion (P < 0.0001). Expression of PR A/B and PR B isoforms was examined by quantitative real-time RT-PCR. PR A/B mRNA was lower (P < 0.05) after 11-13 days of culture than after 7 days of culture. This reduction could not be prevented by hCG in the presence (P < 0.05) or absence (P < 0.05) of stimulated progesterone secretion. The expression of PR B mRNA showed a similar pattern (P = 0.054). Simulated early pregnancy in vivo and hCG treatment of luteinised granulosa cells in vitro did not appear to prevent the down-regulation of PR seen during luteolysis.     

Mobility of trace elements from selected Australian fly ashes and its potential impact on aquatic ecosystems

Batch leaching tests have been performed on fly ashes collected from four Australian power stations fuelled by chemically different coals. Two acidic and two alkaline fly ashes were subjected to long-term (144 h) leaching tests, and the behaviour of As, B, Mo and Se was investigated to obtain data on their potential for mobilisation during fly ash-water interactions. All four elements are mobile under different conditions and over different leaching times. The concentrations of these elements released in leaching solutions with initial pH values of 4, 7 and 10 were used to assess the influence of pH conditions on element mobility from the acidic and alkaline fly ashes. The most mobile of the four elements leached were Mo from alkaline fly ashes and B from acidic fly ashes. Arsenic concentration increased with time in leachate solutions from acidic and alkaline fly ashes; however, in solutions in contact with alkaline fly ashes the As concentration, after reaching a maximum, later decreased with time. Selenium mobility shows a similar pattern to that of As, with similar leaching concentrations. Boron has the highest relative mobility of all four elements. A process possibly responsible for the decrease in concentration of B, As and Se in alkaline leaching solutions is the formation of ettringite. Equilibrium between the solid phase (ash) and the leaching solution was not reached in any of the leaching experiments. The pH of the leaching solution is the key factor affecting the mobility of these trace elements in these fly ashes.     

Design and optimization of electrochemical microreactors for continuous electrosynthesis

The study focuses on the design and construction, as well as the theoretical and experimental optimization of electrochemical filter press microreactors for the electrosynthesis of molecules with a high added value. The main characteristics of these devices are firstly a high-specific electrochemical area to increase conversion and selectivity, and secondly the shape and size of the microchannels designed for a uniform residence time distribution of the fluid. A heat exchanger is integrated into the microstructured electrode to rapidly remove (or supply) the heat required in exo- or endothermic reactions. The microreactors designed are used to perform-specific electrosynthesis reactions such as thermodynamically unfavorable reactions (continuous NADH regeneration), or reactions with high enthalpy changes.     

Detection of Axial Cracks in Pipes Using Focused Guided Waves

The implementation of synthetic guided wave focusing to locate axially aligned defects in pipes has been investigated. Results from both finite element computer models and experiments on real pipes are presented and the data show good agreement. Focusing is necessary to improve the reflection coefficient from axially aligned defects, as the signals are very weak. The Common Source Method (CSM) of synthetic focusing has been applied which makes it possible to apply focusing via post processing to previously collected data. The dependence of reflection coefficient on crack length was measured for both through thickness and part depth axially aligned defects, at a range of frequencies, using the torsional guided wave family. The results show that the reflection coefficient is approximately doubled when focusing is employed, compared to the sensitivity for unfocused fundamental torsional waves. However the sensitivity is still very low, so in practise this approach could only be used to find severe defects.