Cold sintering process: A new era for ceramic packaging and microwave device development

Cold sintering process (CSP) is an extremely low‐temperature sintering process (room temperature to ~200°C) that uses aqueous‐based solutions as transient solvents to aid densification by a nonequilibrium dissolution‐precipitation process. In this work, CSP is introduced to fabricate microwave and packaging dielectric substrates, including ceramics (bulk monolithic substrates and multilayers) and ceramic‐polymer composites. Some dielectric materials, namely Li₂MoO₄, Na₂Mo₂O₇, K₂Mo₂O₇, and (LiBi)_0.5MoO₄ ceramics, and also (1?x)Li₂MoO₄?xPTFE and (1?x)(LiBi)_0.5MoO₄?xPTFE composites, are selected to demonstrate the feasibility of CSP in microwave and packaging substrate applications. Selected dielectric ceramics and composites with high densities (88%‐95%) and good microwave dielectric properties (permittivity, 5.6‐37.1; Q × f, 1700‐30 500 GHz) were obtained by CSP at 120°C. CSP can be also used to potentially develop a new co‐fired ceramic technology, namely CSCC. Li₂MoO₄?Ag multilayer co‐fired ceramic structures were successfully fabricated without obvious delamination, warping, or interdiffusion. Numerous materials with different dielectric properties can be densified by CSP, indicating that CSP provides a simple, effective, and energy‐saving strategy for the ceramic packaging and microwave device development.     

Dielectric studies of the effect of water on the relaxation properties of nitroglycerine-nitrocellulose mixtures

Dielectric relaxation and water adsorption data are reported on mixtures of nitrocellulose and nitroglycerine which have been exposed to moisture to varying degrees. It was observed that the characteristics of these systems depend on the level of nitrogen in the base polymer. At 10.9% hydroxyl sites still exist which can effectively interact with the moisture, whereas at 12.9% the free hydroxyls appear to be incorporated into the ordered semi-crystalline regions of the polymer. The addition of water to nitroglycerine-nitrocellulose mixtures has little effect on the dominant beta relaxation other than to narrow the distribution of relaxations. The relaxation process is, in this case, associated with a cooperative relaxation of nitroglycerine moieties. Water has the effect of decreasing the cooperativity of the beta relaxation process.     

Lycopene from two food sources does not affect antioxidant or cholesterol status of middle-aged adults

Background

Epidemiological studies have reported associations between reduced cardiovascular disease and diets rich in tomato and/or lycopene. Intervention studies have shown that lycopene-containing foods may reduce cholesterol levels and lipid peroxidation, factors implicated in the initiation of cardiovascular disease. The objective of this study was to determine whether consumption of lycopene rich foods conferred cardiovascular protection to middle-aged adults as indicated by plasma lipid concentrations and measures of ex vivo antioxidants.

Methods

Ten healthy men and women consumed a low lycopene diet with no added lycopene (control treatment) or supplemented with watermelon or tomato juice each containing 20 mg lycopene. Subjects consumed each treatment for three weeks in a crossover design. Plasma, collected weekly was analyzed for total cholesterol, high density lipoprotein cholesterol (HDL-C) and triglyceride concentrations and for the antioxidant biomarkers of malondialdehyde formation products (MDA), plasma glutathione peroxidase (GPX) and ferric reducing ability of plasma (FRAP). Data were analyzed using Proc Mixed Procedure and associations between antioxidant and lipid measures were identified by Pearson's product moment correlation analysis.

Results

Compared to the control diet, the lycopene-containing foods did not affect plasma lipid concentrations or antioxidant biomarkers. Women had higher total cholesterol, HDL-C and triglyceride concentrations than did the men. Total cholesterol was positively correlated to MDA and FRAP while HDL-C was positively correlated to MDA and GPX. GPX was negatively correlated to triglyceride concentration.

Conclusions

The inclusion of watermelon or tomato juice containing 20 mg lycopene did not affect plasma lipid concentrations or antioxidant status of healthy subjects. However, plasma cholesterol levels impacted the results of MDA and FRAP antioxidant tests.     

How good are clinical MEDLINE searches? A comparative study of clinical end-user and librarian searches

The objective of this study was to determine the quality of MEDLINE searches done by physicians, physician trainees, and expert searchers (clinicians and librarians). Its design was an analytic survey with independent replication in a setting of self-service online searching from medical wards, an intensive care unit, a coronary care unit, an emergency room, and an ambulatory clinic in a 300-bed teaching hospital. Participating were all M.D. clinical clerks, house, and attending staff responsible for patients in the above settings. Intervention for all participants consisted of a 2-h small group class and 1-h practice session on MEDLINE searching (GRATEFUL MED) before free access to MEDLINE. Search questions from 104 randomly selected novice searches were given to 1 of 13 clinicians with prior search experience and 1 of 3 librarians to run independent searches (triplicated searches). Measurements and main results from these unique citations of the triplicated searches were sent to expert clinicians to rate for relevance (7-point scale). Recall (number of relevant citations retrieved from an individual search divided by the total number of relevant citations from all searches on the same topic) and precision (proportion of relevant citations retrieved in each search) were calculated. Librarians were significantly better than novices for both. Librarians had equivalent recall to, and better precision than, experienced end-users. Unexpectedly, only 20% of relevant citations were retrieved by more than one search of the set of three, with the conclusion that novice searchers on MEDLINE via GRATEFUL MED after brief training have relatively low recall and precision. Recall improves with experience but precision remains suboptimal. Further research is needed to determine the "learning curve," evaluate training interventions, and explore the non-overlapping retrieval of relevant citations by different searchers.     

△∑转换器中的转换时延

小信号传感器通常生成慢速移动的DC信号。对这类传感器来说,△∑ADC就可以作为完整的高分辨率、低噪声解决方案,而无需大部分模拟输入电路。一些系统采用多个传感器,这些传感器要求输出端带多路复用器的高分辨率、低噪声ADC相匹配。例如,汽车诊断应用就是一种多路夏用传感器系统,其通过焱多小信号传感器监控温度、胎压、气囊就绪情况等（如图1所示）。     

Analysis of cross-weld creep rupture data on the ½Cr½Mo¼V type IV zone

For the ferritic steel ½Cr½Mo¼V, the operating experience of medium and long term creep failures in power station welds has been of cavitation and cracking in the heat affected zone (HAZ) adjacent to the parent material, in what is referred to as the Type IV zone. This experience has led to the generation of uniaxial cross-weld creep rupture data on ½CrMoV weldments and to the development of life assessment procedures such as R5 Volume 7, which uses the rupture strength of the Type IV zone to calculate the life of power station components. Recently, the ECCC Working Group 3A has conducted a collation of the UK and German cross-weld creep rupture data on ½CrMoV weldments. Creep failure in ½CrMoV cross-weld specimens occurs in a variety of weldment zones; typically in the parent, the Type IV zone or the weld metal. Post test examination of the specimens has enabled those tests that failed in the Type IV zone to be identified and a creep rupture data assessment has been performed to derive a new model for the rupture strength of the Type IV zone.     

Thermal comfort in outdoor urban spaces: understanding the human parameter

The research being undertaken seeks to achieve a better understanding of the richness of microclimatic characteristics in outdoor urban spaces, and the comfort implications for the people using them. The underlying hypothesis is that these conditions influence people’s behaviour and usage of outdoor spaces. The initial results demonstrate that a purely physiological approach is inadequate in characterising comfort conditions outdoors, and an understanding of the dynamic human parameter is necessary in designing spaces for public use. The thermal environment is indeed of prime importance influencing people’s use of these spaces, but psychological adaptation (available choice, environmental stimulation, thermal history, memory effect, expectations) is also of great importance in such spaces that present few constraints.     

High performance AlyGa1−yAs-GaAs-lrxGa1−xAs quantum well lasers defined by silicon-oxygen impurity-induced layer disordering

In these experiments impurity-induced layer disordering (IILD) utilizing chemical reduction of SiO₂ by Al (from Al_0.8Ga_0.2As) is employed to generate Si and O to effect layer disordering. The SiO₂-Al_0.8Ga_0.2As reaction is studied with respect to annealing ambient. By controlling the extent of disordering via As₄ overpressure, closely spaced (∼1μm) Si-O IILD buried heterostructure lasers can be optically coupled or uncoupled. Direct observation of O incorporation into the buried layers is shown using secondary ion mass spectroscopy (SIMS). The thermal stability of separate-confinement Al_yGa_1−yAs-GaAs-In_xGa_1−xAs quantum well heterostructure (QWH) laser crystals is investigated using SIMS, transmission electron microscopy (TEM), and photoluminescence (PL) measurements. The data show that the thermal stability of a strained-layer In_0.1Ga_0.9As quantum well (QW) is strongly dependent upon: (1) the layer thickness and heterointerfaces of the Al_yGa_1−yAs-GaAs waveguide layers located directly above and below the QW, (2) the type of surface encapsulant employed, and (3) the annealing ambient. Narrow single-stripe (<2μm) lasers fabricated via Si-O diffusion and layer disordering exhibit low threshold currents (I_th ∼ 4 mA) and differential quantum efficiencies,η, of 22% per facet under continuous (cw) room-temperature operation.     

Carbon tetrachloride doped Al x Ga1−x As grown by metalorganic chemical vapor deposition

A dilute mixture of CCl₄ in H₂ has recently been shown to be a suitable carbon doping source for obtainingp-type GaAs grown by metalorganic chemical vapor deposition (MOCVD) with carbon acceptor concentrations in excess of 1 × 10¹⁹cm⁻³. To understand the effect of growth parameters on carbon incorporation in CCl₄ doped Al _x Ga_1−x As, carbon acceptor concentration was studied as a function of Al composition, growth temperature, growth rate, and CCl₄ flow rate using electrochemical capacitance-voltage profiling. The carbon incorporation as a function of Al composition, growth temperature and CCl₄ flow rate was also measured by secondary ion mass spectroscopy (SIMS). All layers were grown by low pressure MOCVD using TMGa and TMAl as column III precursors, and 100% AsH₃ as the column V source. Increased Al composition reduced the dependence of carbon concentration on the growth temperature. Reduced growth rate, which resulted in substantially decreased carbon acceptor concentrations in GaAs, had an insignificant effect on the carrier concentration of Al_0.4Ga_0.6As. A linear relationship between hole concentration and CC1₄ flow rate in Al_xGa_1−x As for 0.0 ≤x ≤ 0.8 was observed. These results are interpreted to indicate that adsorption and desorption of CCl _y (y ≤ 3) on the Al _x Ga_1-x As surface during crystal growth plays an important role in the carbon incorporation mechanism.