Reactivation of a Carbon-supported Gold Catalyst for the Hydrochlorination of Acetylene

Acetylene hydrochlorination using a carbon-supported gold catalyst is studied. Reactivation of the catalyst is demonstrated using a brief treatment of the spent catalyst with boiling aqua regia and the process of reactivation and deactivation is characterised using X-ray photoelectron spectroscopy. Deactivation is considered to be due to loss of Au³⁺ which is restored by the aqua regia treatment.     

Kinase inhibitor scaffolds against neurodegenerative diseases from a Southern Australian ascidian, Didemnum sp

Screening a library of Southern Australian and Antarctic marine invertebrates and algae for inhibitors of neurodegenerative disease kinase targets casein kinase 1 (CK1δ), cyclin-dependent kinase 5 (CDK5) and glycogen synthase kinase 3β (GSK3β) identified a Western Australian Didemnum species (CMB-02127) as a high-priority specimen. Chemical fractionation returned the known aromatic alkaloids ningalins B-D as the major metabolites, together with six minor metabolites, the new ningalins E-G and the known hexacyclic pyrrole alkaloids lamellarins Z, G and A6. All structures were assigned by detailed spectroscopic analysis and literature comparisons, and the structural assignments were supported by biosynthetic considerations. The ningalins showed potent and broad inhibition across the three kinases, while the lamellarins were generally more selective for CDK5. Docking studies using published X-ray crystal structures of CDK5 revealed both scaffolds target the ATP binding pocket.     

The photoinduced charge transfer mechanism in aligned and unaligned carbon nanotubes

Using time-resolved reflectivity measurements on unaligned and aligned bundled single-wall carbon nanotubes with a pump energy of 1.55 eV, quasi-resonant with the second Van Hove singularity of semiconducting tubes, a positive sign of the transient reflectivity is detected in unaligned nanotubes. In contrast a negative sign is detected in aligned nanotubes. This discovery addresses a long-standing question showing that in unaligned nanotubes the stronger intertube interactions favor the formation of short-lived free charge carriers in semiconducting tubes. A detailed analysis of the transient reflectivity spectral response shows that the free carriers in the photo-excited state of semiconducting tubes move towards metallic tubes in about 400 fs.     

Structure‐Properties Relationship in Iron Oxide‐Reduced Graphene Oxide Nanostructures for Li‐Ion Batteries

Non‐aqueous sol‐gel routes involving the reaction of metal oxide precursors in organic solvents (e.g., benzyl alcohol) at moderate temperature and pressure, offer advantages such as high purity, high reproducibility and the ability to control the crystal growth without the need of using additional ligands. In this paper, a study carried out on a series of iron oxide/reduced graphene oxide composites is presented to elucidate a structure‐properties relationship leading to an improved electrochemical performance of such composites. Moreover, it is demonstrated that the easy production of the composites in a variety of temperature and composition ranges, allows a fine control over the final particles size, density and distribution. The materials obtained are remarkable in terms of the particle's size homogeneity and dispersion onto the reduced graphene oxide surface. Moreover, the synthesis method used to obtain the graphene oxide clearly affects the performances of the final composites through the control of the restacking of the reduced graphene oxide sheets. It is shown that a homogeneous and less defective reduced graphene oxide enables good electrochemical performances even at high current densities (over 500 mAh/g delivered at current densities as high as 1600 mA/g). The electrochemical properties of improved samples reach the best compromise between specific capacity, rate capability and cycle stability reported so far.     

Impact of synthesis conditions on the structure and performance of Li2FeSiO4

Three different synthesis techniques (hydrothermal synthesis, modified Pechini synthesis and Pechini synthesis) were successfully used for preparation of Li₂FeSiO₄ samples. The obtained samples possess some differences in the morphology and in the particle size, as well as in the presence of in situ formed carbon. The best electrochemical performance has been obtained with the smallest particles embedded into carbon matrix. Such a Li₂FeSiO₄/C composite contains the highest amounts of impurities (Fe₂O₃, SiO₂ and Li₂SiO₃) and only 68.8 at.% of iron is in the form of Fe^II as detected by Mössbauer spectroscopy, respectively. Despite the highest amount of impurities, the sample shows the highest reversible capacity (approximately 100 mAh g⁻¹ based on whole silicate-derived material). With the proper structuring of Li₂FeSiO₄/C composites, utilisation of large part of capacity is also possible at current densities corresponding to C/5 and C/2 cycling rate. A lower amount of impurities was found in the samples that do not contain any in situ carbon after synthesis. Among them, the highest purity is possessed by the sample prepared at 900 °C, as determined using Mössbauer spectroscopy. The results obtained by Mössbauer spectroscopy and XRD analysis indicate on the differences in the crystal structure between the thermally treated samples and the sample prepared by hydrothermal synthesis.     

Application of SMA Composites in the Collectors of the Railway Pantograph for the Italian High-Speed Train

In high-speed train operation the flexural modes of the collector play a significant role in the vibrations for the frequencies over 40-50 Hz. In a previous work it has been established that a possible way to increase the modal damping of these flexural modes, without deep modification of the collector structure, is to increase the specific damping of the lateral horns, usually made of glass fiber polymer. Ni-Ti alloy yarns can be used as “smart fibers” embedded in this conventional material in order to make new horns with increased damping capacity, with a configuration of laminated composite material. The first step of the work herein presented consists in setting, through a proper thermal treatment, martensitic structure within the pantograph working temperature range, in order to obtain damping capabilities at low amplitude strain in the range 10^?4-10^?3. Afterwards a series of dynamic tests aimed at identifying the damping capacity of the NiTi wires has been undertaken. A finite element (FE) model of the SMA composites horn has been finally validated, comparing the results of dynamic numerical analysis with the results of measurements.     

Emulsion Spray-Drying for the Preparation of Albumin-Loaded PLGA Microspheres

The purpose of this work was to study the encapsulation of bovine serum albumin (BSA) in polylactide-co-glycolide (PLGA) microspheres using an emulsion/spray-drying method. Albumin was dissolved in an aqueous phase (w) in the presence of surfactant and emulsified in an organic phase containing the polymer (o). To stabilize the emulsion, different types of surfactant (Pluronic® F68, Pluronic F127, sodium oleate, dioctylsulfosuccinate) were added to the aqueous phase. The w/o emulsion was spray-dried to obtain BSA-loaded PLGA microspheres. The effect of type of surfactant on microsphere characteristics was evaluated. The microspheres were characterized for their morphology by scanning electron microscopy (SEM) and granulometric analysis; drug content determination and in vitro dissolution tests were performed. Results showed that the emulsion/spray-drying method is suitable for obtaining small microparticles (2-5 μm) characterized by high drug payloads (70%-80% encapsulation efficiency). The type of surfactant affects the microsphere shape and BSA release behavior.