Determination ofp-cymene-2,3-diol, thymol, and carvacrol in different foodstuffs

p-Cymene-2,3-diol, carvacrol and thymol are components of thyme that exhibit antioxidant activities. The concentration of each substance was determined in different foodstuffs containing thyme extract. The stabilities ofp-cymene-2,3-diol, carvacrol and thymol were examined by heating lard containing thyme extract at temperatures from 80 °C to 160 °C.     

Submicron droplet formation in the human lung

The exhaled breath of humans contains droplets originating from the lung lining fluid. An analysis of these droplets for non-volatile proteinaceous biomarkers holds potential as a non-invasive diagnosis of lung diseases. To ease the interpretation of the diagnostic results, the source strength of the particles should be known und therefore an understanding of the particle generation process is required. It is assumed that during reopening of a collapsed terminal airway a liquid bridge of the lung lining fluid ruptures and droplets are generated. The objective of our experimental and theoretical study was to clarify the mechanisms of droplet generation for quiet breathing patterns by investigating in detail the number flux and the particle size distribution in the exhaled breath. The process of liquid film rupture is modelled by computational fluid dynamics analysis from which the droplet size distribution is calculated. In addition the number emission flux and the droplet size distribution are systematically measured in the exhaled breath of healthy volunteers. The strong increase of the particle emission flux with tidal volume and the good agreement between measured and calculated droplet number distribution both showing droplets primarily in the submicron range confirm the present hypothesis that reopening of collapsed airway structures associated with the rupture of a surfactant film is the physical mechanism of droplet generation. This was hypothesized previously in the literature.     

Separation of alkanes and alcohols with supercritical fluids. Part I: Phase equilibria and viability study

The chemical conversion of detergent range alkanes (12-14 carbon atoms) to alcohols is often incomplete and results in a large amount of residual alkane. This paper shows that these alkanes and alcohols can be separated by supercritical fluids. Ethane, propane and carbon dioxide were selected as possible supercritical solvents while n-tetradecane and 1-dodecanol were selected to represent the alkane-alcohol mixture, as these would be the two most difficult compounds to separate in a C12 to C14 alkane-alcohol mixture. A phase behaviour study and relative solubility analysis revealed that both ethane and carbon dioxide show promise in separating n-tetradecane and 1-dodecanol. Propane was eliminated as possible solvent because the phase behaviour of n-tetradecane and 1-dodecanol in supercritical propane is too similar. A pilot plant study showed that both supercritical ethane and carbon dioxide can be used to separate n-tetradecane and 1-dodecanol, with indications that supercritical ethane may affect a superior separation. An economic analysis, considering the energy requirements, revealed that the most important parameter with regard to energy consumption is the solvent-to-feed ratio. The process utilising ethane is more energy intensive, yet the energy requirements for both processes compare well with other petrochemical separation processes using supercritical fluids. Further investigations with both ethane and carbon dioxide should be conducted to determine which of these two solvents are superior and to optimise the operating parameters.     

Recognizing whether sensors are on the same body

In an open mobile health (mHealth) sensing system, users will be able to seamlessly pair sensors with their cellphone and expect the system to just work. This ubiquity of sensors, however, creates the potential for users to accidentally wear sensors that are not paired with their own cellphone. Our method probabilistically detects this situation by finding correlations between embedded accelerometers in the cellphone and sensor. We evaluate our method over a dataset of seven individuals with sensors in various positions on their body and experimentally show that our method is capable of achieving an accuracy of 85%.     

Effect of cathodic protection on macrocell currents: A viable method to monitor and control the efficiency of CP?

Corrosion protection of steel reinforcement in concrete structures by cathodic protection (CP) is a cost effective, reliable, and widely accepted method to stop and prevent the corrosion of the steel reinforcement. The efficiency of CP is usually monitored by the “24 h, 100 mV depolarization criterion,” a purely empirical criterion whose implementation is cost and labor intensive and that does not allow online control of CP. Within an extended research project on CP applied to concrete members of a highway bridge exposed to penetrating moisture, three sets of macrocells (MC), each composed of five MC sensors, were installed in conjunction with concrete resistance sensors and silver/silver chloride reference cells. Chloride profiles were determined from the cored or drilled powder originating from the installation of sensors and from drilling cores. Corrosion currents, steel potentials, and concrete resistance were monitored over a period of 1 year before, after installing the CP systems (which remained switched off for half a year for evaluating the effect of the conductive coating), and after start-up of the CP systems. The CP systems applied consist of a moisture resistant conductive coating. As expected CP has a pronounced effect on local MC currents: Anodic MC currents were reduced or changed into cathodic currents, whereas cathodic currents were only weakly influenced. By adjusting the applied protection current all anodic MC currents may be changed into cathodic MC currents. Results indicate that the 100 mV depolarization criterion is a conservative criterion in atmospherically exposed concrete; it is not reliable in strongly wetted concrete. There was no consistent correlation between the CP induced changes in the local MC currents and 24 h depolarization values indicating that large potential shifts induced by CP do not necessarily imply overprotection. Results show that monitoring MC currents before, during, and after CP operation allows to demonstrate in a transparent way the effect of CP on the corrosion of the steel reinforcement. Online monitoring of MC currents is proposed as a viable and comprehensible method to monitor and control the efficiency of CP.     

Survey on the content of vitisin A and hydroxyphenyl-pyranoanthocyanins in Tempranillo wines

Little is known about the content and development of pyranoanthocyanins, pigments mainly formed during red wine ageing, in commercial wines. Some of the major pyranoanthocyanins in a wide selection of 1–10 years-old Spanish Tempranillo wines and also in a 29 years wide-vertical series of Tempranillo wines from an individual cellar have been determined. Great variability in pyranoanthocyanin concentrations was found (range, mg/l): vitisin A, 0–10.76; pinotin A, 0–4.26; and malvidin 3-glucoside-4-vinylphenol, 0.03–1.37. Vitisin A and malvidin 3-glucoside-4-vinylphenol were already present in 1–2 years-old wines, whereas pinotin A was only detectable in a few of the 1 and 2 years-old wines. Vitisin A tended to decrease with wine age, while hydroxyphenyl-pyranoanthocyanins showed the reverse trend. However, the aforementioned trends were interrupted by various temporary maxima, most likely due to some “refreshment” of the oldest wines (i.e., addition of young wine), as suggested by unexpected high concentrations of malvidin 3-glucoside, in contrast to the results found in the wine vertical series. The effects of addition of young wine on aged wine pyranoanthocyanin concentrations were confirmed by wine refreshment experiments.