An application of frequency and duration approach in generationplanning

The available analytical tools for planning not only inadequately model pumped storage (PS) power plant units but also underestimate their load-levelling benefits. Therefore, if a PS power plant is among the candidate plants, its selection in the final “optimal plan” is highly unlikely. This research deals to assess the complete load-levelling benefits of PS units. The technique used is the frequency and duration approach coupled with the equivalent load duration curve (ELDC) method, used for generation planning. The proposed method is applied to IEEE RTS data and it is shown that almost 50% of PS benefits are not quantified in ELDC method     

Radiation from cylindrical leaky waves

Formulas are derived for the far-infrared radiation pattern of cylindrical leaky waves propagating on a planar surface. The formulas can be used to predict the radiation pattern of a general class of leaky-wave antennas, consisting of a finite-size source which excites a radially propagating leaky wave on some planar surface. Leaky-wave antennas consisting of antenna elements embedded in dielectric layers (microstrip elements) fall into this category. Using the equivalence principle, formulas are derived for both transverse electric (TE) and transverse magnetic (TM) leaky waves with arbitrary propagation constants. The formulas allow for radiation from cylindrical apertures of arbitrary size, so that the effect of truncating the supporting planar surface with an absorbing material can be determined. Particular attention is devoted to the case of a leaky wave for which the real and imaginary parts of the complex propagation constant are equal, since this type of wave has been shown to be responsible for broadside radiation in certain leaky-wave antennas comprised of dielectric layers     

Modeling the cleanliness level of an ultrasonic cleaning system by using design of experiments and artificial neural networks

The hard disk drive is a reliable and relatively cheap mass storage device used in every computer nowadays. In this study, one major issue affecting the product quality of the fixture inside a hard disk drive is the surface contamination of the arm finger of actuator (AFA). For economical exploitation, a primary concern is to generate a model for optimizing the process parameter settings necessary to sustain the desired cleanliness level in an ultrasonic cleaning process. Two approaches were employed to identify critical process parameters, followed by the determination of the optimal parameter settings. The former approach was a statistical design of experiments (DOE) for developing regression equations for predicting the cleanliness level and finding out the dependence of each parameter and outcome. The latter approach was in using an artificial neural network (ANN) for building prediction models. A comparative study showed that both approaches have advantages over other methods. The results obtained show a reduction in contamination of the AFA; hence it provides an aid in the improvement of product quality.     

A combined current density technique for the electrochemical oxidation of perfluorooctanoic acid (PFOA) with boron‐doped diamond

Perfluoroalkyl substances (PFAS) have unique properties that limit their degradability in the environment. One of these PFAS is an acid (PFOA). Electrochemical oxidation is a promising method for remediation, but energy costs are high. To limit the energy consumption, this study used a boron‐doped diamond (BDD) electrode stack and a combined current density technique that employed 50 mA/cm² for the first 0.25 hours then lowered the current density to 1, 5, or 10 mA/cm². This technique is similar to one developed previously; however, that method was only developed for compounds comprising of carbon, oxygen and nitrogen, whereas PFAS have the addition of fluorine. For the degradation of PFOA, the combined current density of 50 and 5 mA/cm² (50&5) allowed for a 37% reduction in energy usage to obtain 75% defluorination compared to using 50 mA/cm² alone. Further investigation into remediating an ion‐exchange regeneration solution shows great promise.     

Shading performance of a vertical deciduous climbing plant canopy

Deciduous climbing plant canopies strategically integrated to building façades can act as dynamic solar shading devices responsive to the seasonal climatic changes. Maximum shading occurs in the summer when the plant is at its peak growth. The shedding of leaves in autumn and winter reduces the shading and allows beneficial solar radiation to be absorbed by the opaque surface of the building façade or penetrated through the windows to the building interior. Although climbing plants have long been used for moderating the microclimate of buildings, there are very few scientific investigations to quantify such effects. This paper reports the findings of a study with specific focus on the shading performance of a vertical deciduous climbing plant canopy. It justifies the selection of Virginia Creeper as an appropriate plant for growth in the UK climate and describes the planting, monitoring and analysis procedures adopted to determine a proposed dynamic Bioshading Coefficient Function – which is used to represent the shading performance of the climbing plant canopy over its annual growing and wilting cycle. A thermal model was developed which identified the key parameters required for establishing the Bioshading Coefficients. Two climbing plant canopies (referred to as Bioshaders) were set up in an existing building in Southeast UK and monitored for 2 years. Measured data were used to calculate a series of daily Bioshading Coefficients which were subsequently applied to establish the Bioshading Coefficient Function. The research also identified issues affecting the indoor environment as a result of the application of Bioshaders.     

Molybdenum carbide catalysts for water–gas shift

Molybdenum carbide (Mo₂C) was demonstrated to be highly active for the water–gas shift of a synthetic steam reformer exhaust stream. This catalyst was more active than a commercial Cu–Zn–Al shift catalyst under the conditions employed (220–295°C and atmospheric pressure). In addition, Mo₂C did not catalyze the methanation reaction. There was no apparent deactivation or modification of the structure during 48 h on‐stream. The results suggest that high surface area carbides are promising candidates for development as commercial water–gas shift catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.     

Room-Temperature Solid-Matrix Luminescence Spectroscopy of Pyrene and 1-Hydroxypyrene from Optically Clear Sugar Glasses

Room-temperature solid-matrix luminescence was investigated for two model compounds pyrene and 1-hydroxypyrene from optically clear sugar glasses. Several glasses were investigated. Novel glasses were prepared for the first time from binary mixtures of sugars for spectroscopy. Glasses were prepared from glucose/xylose and glucose/maltose. The glucose/maltose gave a superior glass compared to glucose/xylose. The glucose/maltose glass gave the best room temperature phosphorescence (RTP) for pyrene compared to glasses of glucose and maltose without a heavy atom. The RTP was weak for both pyrene and 1-hydroxypyrene without a heavy atom in the glucose glass. The addition of a heavy atom (12% NaI) gave a 44-fold increase in RTP of pyrene and a 10-fold increase in the RTP of 1-hydroxypyrene. Room temperature fluorescence (RTF) of pyrene and 1-hydroxypyrene were easily observed from all the glass systems studied. However, the pyrene RTF intensity varied with the different sugar glass systems studied. Furthermore, a polymer, polyacrylic acid (PAA), was added to the sugar matrix at the level of 1% and 2% to improve the rigidity of the glass matrix. The observed phosphorescence was weak for pyrene at both the 1% and 2% PAA concentrations. A glass prepared with 2% PAA gave the strongest RTP for pyrene. Addition of 12% NaI with 1% polyacrylic acid did improve the RTP of pyrene but it was less than the RTP of pyrene from a glucose glass with 12% NaI by a factor of 2.7. A glucose glass with 12% NaI was the best system for RTP of pyrene.     

Evolutionary events in a mathematical sciences research collaboration network

This study examines long-term trends and shifting behavior in the collaboration network of mathematics literature, using a subset of data from Mathematical Reviews spanning 1985–2009. Rather than modeling the network cumulatively, this study traces the evolution of the “here and now” using fixed-duration sliding windows. The analysis uses a suite of common network diagnostics, including the distributions of degrees, distances, and clustering, to track network structure. Several random models that call these diagnostics as parameters help tease them apart as factors from the values of others. Some behaviors are consistent over the entire interval, but most diagnostics indicate that the network’s structural evolution is dominated by occasional dramatic shifts in otherwise steady trends. These behaviors are not distributed evenly across the network; stark differences in evolution can be observed between two major subnetworks, loosely thought of as “pure” and “applied”, which approximately partition the aggregate. The paper characterizes two major events along the mathematics network trajectory and discusses possible explanatory factors.     

Seeing versus imagining movement in depth.

Six undergraduate students participated in 2 experiments to determine whether the same mechanisms are activated during perception of real vs apparent motion. In Exp 1, Ss judged the quality of rigid motion between pairs of 3-dimensional drawings that differed by a rotation in depth. Rated quality of motion decreased with increasing angular disparity between the figures and with decreasing stimulus duration, regardless of whether the figures were vertical or oblique. In Exp 2, Ss participated in a mental rotation task using the same stimuli and angular disparities. Ss took longer to make decisions about obliquely aligned than vertically aligned stimuli. Results imply that perceived vs imagined movement through the same trajectory involves different processes. (French abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)