Compressive behavior of MWCNT/epoxy composite mats

Mats of vertically-aligned multiwall carbon nanotubes were grown in an thermal CVD reactor with simultaneous feed of the catalyst and carbon precursors. Mats were soaked into epoxy resin solutions without any prior chemical modification and then cured to produce composite plates of z-axis nano-reinforcement. Direct observations of the epoxy–CNT interactions at the nanoscale revealed that epoxy interacted naturally with the MWCNTs without affecting their physical characteristics, alignment, or the mat’s morphology. The compressive behavior of the pristine and composite mats was consistent with mechanical predictions accounting for an elastic regime followed by elastic instability and compaction. Strong evidence of reinforcement in the MWCNT/epoxy composites was indicated by increased strength, stiffness and toughness values with respect to the as-grown mats and pure polymer. The elastic instability strain of the composites was of the order of 0.4.     

Nonlinear decoupling control in the presence of sensor and actuator deadtimes

This work focuses on synthesizing nonlinear decoupling controllers for multivariable nonlinear systems represented by a state-space model, in the presence of deadtimes. The deadtimes appear in both the inputs and the outputs, but not in the states, and are physically associated with sensors and actuators. Simple sufficient conditions for feasibility of closed-loop deadtimes are derived, which rely only on the structural properties of the system. A control law is then derived so that the closed-loop system is input/output linear and decoupled, with deadtimes equal to the smallest ones that satisfy the feasibility conditions. The proposed method is applied to a chemical process. Its performance is evaluated through simulation in the presence of set-point and disturbance changes.     

Dynamic modeling of multizone,multifeed high-pressure LDPE autoclaves

A comprehensive mathematical model is developed to simulate the dynamic behavior of multizone, multifeed high-pressure ethylene polymerization autoclaves. To describe the complex flow patterns occurring in low-density polyethylene (LDPE) autoclaves, a user-specified multisegment, multirecycle model representation of the actual multizone reactor is established. A general reaction mechanism is employed to represent the kinetics of ethylene polymerization. Dynamic mass, molar species, and energy balances are derived to predict the polymerization rate, monomer conversion, molecular weight developments (e.g., M_n, M_w, long- and short-chain branching), and temperature profile with respect to time and spatial position in the reactor. Detailed results on the start-up and grade transition of a four-zone autoclave reactor are presented and the effects of the macromixing parameters (e.g., number of segments per reaction zone and the total and side external recycle ratios) on the dynamic behavior of the reactor are investigated. It is shown that the model macromixing parameters can significantly affect the initiator consumption rate in a reaction zone. The present model is capable of predicting accurately the dynamic behavior of LDPE autoclaves and, thus, can be employed in the design, optimization, and control of these reactors. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2327–2348, 1999     

Polymers prepared using cleavable initiators: Synthesis, characterization and degradation

Following the great interest in polymers based on degradable monomers and degradable cross-linkers, there is now an increasing activity in the controlled synthesis of polymers using degradable initiators. The degradation of polymers bearing residues of degradable initiators has three unique effects: (a) creation of functional end-groups, (b) controlled reduction in molecular weight, and (c) controlled reduction in the degree of branching. Degradation of such polymers has been done for various reasons, including the production of end-functionalized polymers with freshly prepared thiol end-groups for specific adsorption on to gold surfaces, the transformation of a physical gel to a solution, the conversion of end-linked networks to end-functionalized star polymers and the characterization of their core functionality, and the fabrication of nanoporous membranes by the etching of cylindrical nanophases out of a diblock copolymer film. To date, a variety of labile groups have been employed in these initiators, with most notable example the disulfide, while some other groups are yet to be used.     

Occurrence of copper resistant mutants in the toxic cyanobacteria Microcystis aeruginosa: characterisation and future implications in the use of copper sulphate as algaecide

Freshwater toxic cyanobacteria are an increasing problem to human and animal health. Control of cyanobacteria in water supply reservoirs involves the use of algaecides, such as copper sulphate, usually in a repetitive way. Repercussions of recurrent algaecide treatments on cyanobacteria population dynamics remain still unknown. We studied the adaptation of cyanobacteria to lethal doses of copper sulphate by using Microcystis aeruginosa as an experimental model. A fluctuation analysis demonstrated that copper-resistant cells arise by spontaneous mutations that occur randomly prior to exposition to copper sulphate. The rate of spontaneous mutation from copper sensitivity to resistance was 1.76×10⁻⁶ mutants per cell division. Resistant mutants exhibited a diminished fitness in the absence of copper sulphate, but only these variants were able to grow at Cu²⁺ concentrations higher than 5.8 μM. In addition, copper-resistant cells were significantly smaller than wild-type ones. Warnings on the long-term consequences of repetitive algaecide treatments in water supplies are suggested.