Mode I Fracture Resistance of a Laminated Fiber-Reinforced Ceramic

The mode I fracture resistance of a ceramic matrix composite has been measured. Simultaneous observations have revealed that the resistance is dominated by frictional dissipation upon the pullout of fibers that fracture in the crack wake off the crack plane. Numerical and analytical crack growth simulations have been compared with the experimental results. One important feature in this comparison concerns the occurrence of large-scale bridging. With these effects taken into account, the simulations and the experiments are found to be in good correspondence for acceptable magnitudes of the interface sliding stress.     

A block copolymer nanotemplate for mechanically tunable polarized emission from a conjugated polymer

A polymer blend system consisting of polystyrene grafted onto poly (p-phenylene ethynylene) (PS-g-PPE) and poly (styrene-block-isoprene-block-styrene) triblock copolymer (SIS) yields highly polarized emission due to the unidirectional alignment of the PPE molecules. During the roll casting, the triblock copolymer microphase separates and creates unidirectionally aligned PS cylindrical microdomains in the rubbery PI matrix. PPE, a fluorescent conjugated polymer, was grafted with polystyrene (PS) side chains that enabled sequestration and alignment of these rigid backbone emitter molecules into the PS microdomains of the SIS triblock copolymer. Deforming the thermoplastic elastomer in a direction perpendicular to the orientation direction of the cylinders causes rotation of the PS cylinders and the PPE emitter molecules and affords tunable polarized emission due to re-orientation of the PPE containing PS cylinders as well as film thinning from Poisson effect.     

Attractive and inhibitory pheromones produced in the bark beetle,Dendroctonus brevicomis,during host colonization: Regulation of inter- and intraspecific competition

Quantities of attractive (exo-brevicomin and frontalin) and inhibitory (trans-verbenol, verbenone, and ipsdienol) pheromones were monitored in both sexes ofDendroctonus brevicomis during their colonization of a ponderosa pine. Verbenone was found in males in the greatest amounts at the time of landing, and it declined more rapidly than the other pheromones in either sex. The amounts of frontalin andexo-brevicomin in males and females, respectively, increased after initial boring within the host but began to decline after mating. The quantity oftrans-verbenol in both sexes (females had significantly more) declined more gradually thanexo-brevicomin, frontalin, and verbenone. Ipsdienol was found only in males during the initial stages of attack when encountering the resin. It is suggested that along with a general decline in all pheromonal components, a sufficient change in the ratio of the attractive pheromones to an inhibitory pheromone,trans-verbenol, may play a role in termination of aggregation.trans-Verbenol may also function along with verbenone and ipsdienol in limiting the density of attack and thus intraspecific competition. These inhibitory pheromones also appear to cause several competing species of bark beetle to avoid landing in areas infested withD. brevicomis, even when their own pheromone is present.Coleoptera:Scolytidae. These studies were supported in part by the Rockefeller Foundation, USDA Forest Service, Regional research project W-110, SEA/ USDA, and the National Science Foundation and Environmental Protection Agency through a grant (NSF GB-34719/BMS 75-04223) to the University of California.     

Technical new feature

A continuous process for the commercial production of isopropenyl stearate (IPS) from triple pressed stearic acid and a stabilized form of propyne has been developed. Cost estimates, including capital costs, operating costs, and profitability, for commercial scale plant production which show the process to be economically feasible are presented. This potentially profitable process offers the advantages of reliable raw material sources, minimal external thermal requirements, and usable process waste streams. For a plant producing 5 million pounds of IPS per year, the selling price range is 80 to 107 cents/lb IPS, corresponding to a raw material cost range of 27 to 54 cents/lb of IPS. For a 20 million pound per year plant, the selling price range is 58 to 85 cents/lb IPS. The selling prices include a 20% annual return on fixed capital investment. Fixed capital requirement ranges from 2.7 to 10.9 million dollars (3rd quarter, 1975) for plants ranging in size from 5 to 50 million pounds of IPS per year, respectively.     

Hyperfiltration for recycle of 82°C textile wash Water

A program to demonstrate high temperature hyperfiltration to renovate hot industrial wastewater for direct recycle is in Phase 2; the installation of a ～10m /hr membrane system to achieve closed cycle operation of a textile dye range. Hydrous-zirconium oxide-polyacrylate (ZOPA) membranes dynamically formed on porous sintered stainless steel tubes arranged in a Single Pass system will be supplied by the Mott-Brandon Corporation. Phase I of the program involved on-site pilot testing of several membranes, the procurement of competitive bids for the membrane system and the complete installation including all interface controls required for the dye operation.The 180°F (82°C) dye wash water contains residual dyes, auxiliary detergent and wetting agents, and guar gum. The total solids in the wash water range from 130 to 7000mg/l with the suspended solids ranging from 2 to 90 mg/l. The membrane system will be operated at 96% recovery. The concentrated residue is being studied for reuse or ultimate disposal through evaporation and/ or incineration. The performance of the membranes during the pilot tests, the laboratory evaluation of the reuse, and the complete recovery system are described.     

Quantitative fatty acid analysis of vegetable oils by gas-liquid chromatography

Summary The fatty acid composition of a number of vegetable oils and of two synthetic mixtures of methyl esters are compared by gas-liquid chromatography and by standard methods. The calculated iodine values from G.L.P.C. results are in good agreement with measured iodine values and are indicative of the reliability of the G.L.P.C. values. Standard methods gave lower values for linoleic acid and higher values for linolenic acid than did G.L.P.C. This deviation was particularly evident in oils with a high proportion of linolenic acid,e.g., linseed oil. The results of G.L.P.C. are considered to be accurate to within one unit percentage. Thermal stability of the polyester polymers can be improved by using 1,4-butanediol or ethylene glycol as the polyols instead of diethylene glycol. Issued as N.R.C. No. 5373. Presented at 32nd annual fall meeting, American Oil Chemists' Society, October 20–22, 1958, Chicago, Ill. National Research Council of Canada Postdoctorate Fellow, 1957     

Influence of genetics,environment and admixtures on low erucic acid rapeseed in Canada

Single plant isolates in theBrassica napus andBrassica campestris species of rapeseed yielded glyceride oil containing small amounts of erucic acid. Agronomically suitable varieties were grown commercially in 1971 as the first phase in a changeover of Canadian rapeseed production from varieties with erucic contents of 20–45% to low erucic acid varieties. A program to monitor the erucic content by gas chromatographic analysis in the stages of production, handling and transportation from seed to export shipment was undertaken to evaluate the effects of genetics, environment and admixture. The individual increase in erucic content ranged from 0.5 to 1.0, resulting in total increases of 1–2%. NRCC No. 13471. One of six papers presented in the symposium “Rapeseed Marketing and Breeding,” AOCS Meeting, Ottawa, September 1972.     

Effects of mite resistance mechanism of geraniums on mortality and behavior of foxglove aphid (Acyrthosiphon solani Kaltenbach)

Geraniums (Pelargonium xhortorum Bailey) possess a pest-resistance mechanism, based on glandular trichomes and the exudate they produce, that has been shown to be effective against the two-spotted spider mite (Tetranychus urticae Koch). Using an intact plant bioassay, the effectiveness of the resistance mechanism was determined for another potential pest, the foxglove aphid (Acyrthosiphon solani Kaltenbach). Comparisons were made between plant lines previously analyzed for their degree of resistance to mites, as well as their glandular trichome density and trichome exudate production. Over 100 aphid adults were bioassayed on each of the five plant lines used in the experiment. In addition to adult aphid survival, the production and survival of nymphs was determined in this bioassay. The results indicate that plant lines that are resistant to the two-spotted spider mite are also resistant to the foxglove aphid, while lines susceptible to mites are susceptible to the aphids. To evaluate the physical impediment features of the trichome exudate, the behavior of foxglove aphid nymphs was compared on two geranium lines, one a resistant line with high trichome densities and large quantities of exudate and the second a susceptible line with few trichomes and reduced exudate. A third leaf surface type was produced by washing the exudate from resistant leaves using a mildly basic buffer solution prior to the bioassay. Aphid behavior was divided into five categories: feeding or probing, resting, wandering, struggling, and immobilized. On both susceptible leaves and resistant leaves from which the exudate had been removed by washing, the aphids settled quickly and were observed with inserted stylets during most of the observation intervals. In contrast, aphids on the unwashed resistant leaf surfaces often became ensnared in the sticky trichome exudate and had difficulty in settling to probe the leaf. Physical entrapment by glandular trichome exudate appears to be an important aspect of aphid resistance in geraniums.     

Conductivité électrique totale du systeme iodure d'argent-diiodure de diazonia-6,9-dispiro[5.2.5.3]heptadecane

Résumé La réaction entre l'homopipérazine, HN<(CH₂)₅>NH, et le dibromo-1,5-pentane, Br(CH₂)₅Br, conduit à la formation du dibromure de diazonia-6,9-dispiro[5.2.5.3]heptadécane de formule C₁₅H₃₀N ₂ ²⁺ ·2Br^–. Par permutation en milieu aqueux ou organique on obtient le sel iodé. Ce diiodure est associé à l'iodure d'argent dans des proportions variant entre 75 et 95% en équivalent de AgI. L'étude de la conductivité électrique totale de ce système en fonction de la température montre que le sel double renfermant 82,5% en équivalent de AgI présente, à 25°C, une conductivité électrique totale de 0,0083 ( cm)^–1.

---

The reaction between homopiperazine, HN<(CH₂)₅>NH, and dibromo-1,5-pentane, Br(CH₂)₅Br, gives a diazonia-6,9-dispiro[5.2.5.3]heptadecane dibromide, C₁₅H₃₀N ₂ ²⁺ ·2Br^–. This salt is iodized by permutation in aqueous or organic solution. This diiodide is associated with silver iodide in proportions varying between 75 and 95% equivalent silver iodide. The study of the total electric conductivity shows that the double salt, containing 82.5% equivalent silver iodide, gives a conductivity of 0.0083 ( cm)^–1 at 25°C.

     

Characterization of the TAG of peanut oil by electrospray LC-MS-MS

A study of processed peanut oil was undertaken to assess the utility of HPLC combined with tandem MS to obtain data easily regarding the number of TAG of fats and oils and their FA composition. Mass chromatograms and spectra corresponding to only TAG of a single M.W. were obtained for the full range of TAG in the sample. Analysis of the mass spectra allowed the identification of more than 160 TAG in the sample by their FA composition. In addition, it was possible to estimate relative abundances of the TAG and suggest the position of the FA on glycerol for a limited number of cases. This technique greatly simplifies the task of assigning FA to coeluting TAG and facilitates identification of TAG present in trace quantities in mixtures, with possible application in circumstances where such trace TAG could be significant markers. Results are quickly obtained without extensive sample preparation or prefractionation of the sample.