Influence of chlorhexidine in cavities prepared with ultrasonic or diamond tips on microtensile bond strength

This study evaluated the effect of chlorhexidine (CLX) in cavities prepared with either ultrasound-mounted CVDentUS diamond tips or conventional diamond burs on dentin bond strength after 24 h and 180 days. Forty-eight dentin surfaces from sound third molars were flattened and divided into four groups (n = 12), according to the type of cavity preparation (CVDentUS ultrasound tip or conventional diamond) and with or without 2% CLX (Consepsis) treatment. After application of the adhesive system (Clearfil SE Bond), microhybrid composite resin blocks (Charisma) were made on the dentin surface in increments. After 24 h, the specimens were sectioned into stick-shaped samples with an adhesive interface of approximately 1 mm². From each tooth, half of the sticks were evaluated after 24 h of storage in distilled water and the other half after 180 days, using a universal testing machine. Three-way analysis of variance showed no significant triple interactions (p = 0.722) or double interactions between factors. Higher bond strength values were observed with the use of ultrasonic tips (p = 0.019), irrespective of whether or not CLX was applied in either time period. No difference in bond strength values was observed in terms of CLX application (p = 0.581). No significant difference in bond strength values was shown after storage for 24 h or 180 days (p = 0.302). In conclusion, the ultrasonic tips promoted greater bond strength to dentin, irrespective of whether or not CLX was applied, and storage time.     

Biobased adhesives,gums, emulsions,and binders: current trends and future prospects

Biopolymers derived from renewable resources are an emerging class of advanced materials that offer many useful properties for a wide range of food and nonfood applications. Current state of the art in research and development of renewable polymers as adhesives, gums, binders, and emulsions is the subject of this review. Much of the focus will be on major biopolymers such as starch, proteins, lignin, oils, and their derivatives found in both natural and modified forms, but other biopolymers of promising commercial interest will also be included where warranted. Polymers produced in nature are remarkably diverse in their chemistry, thermomechanical properties, rheology, plasticity, and chemical reactivity. In particular, their capacity to undergo a wide array of chemical modifications yields materials with tailored properties suitable for use as adhesives, gums, coatings, emulsions, and binders. Many such materials are now widely used in commercial products like building materials, lubricants, sealants, coatings, bonding aids, pharmaceuticals, paper, glues, flocculants, processed and frozen foods, as well as tissue engineering and bone repair products. This review provides a general overview of biobased polymers highlighting their source, availability, properties, and usage in industrial products along with the future prospects, challenges, and opportunities they offer.     

Intra- and interspecific mineral composition variability of commercial instant coffees and coffee substitutes: Contribution to mineral intake

The present paper reports the amount and estimated daily mineral intake of nine elements (Ca, Mg, K, Na, P, Fe, Mn, Cr and Ni) in commercial instant coffees and coffee substitutes (n = 49). Elements were quantified by high-resolution continuum source flame (HR-CS-FAAS) and graphite furnace (HR-CS-GFAAS) atomic absorption spectrometry, while phosphorous was evaluated by a standard vanadomolybdophosphoric acid colorimetric method.Instant coffees and coffee substitutes are rich in K, Mg and P (>100 mg/100 g dw), contain Na, Ca and Fe in moderate amounts (>1 mg/100 g), and trace levels of Cr and Ni. Among the samples analysed, plain instant coffees are richer in minerals (p < 0.001), except for Na and Cr. Blends of coffee substitutes (barley, malt, chicory and rye) with coffee (20–66%) present intermediate amounts, while lower quantities are found in substitutes without coffee, particularly in barley.From a nutritional point of view the results indicate that the mean ingestion of two instant beverages per day (total of 4 g instant powder), either with or without coffee, cannot be regarded as important sources of minerals to the human diet, although providing a supplementation of some minerals, particularly Mg and Mn in instant coffees. Additionally, and for authentication purposes, the correlations observed between some elements and the coffee percentage in the blends, with particular significance for Mg amounts, provides a potential tool for the estimation of coffee in substitute blends.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Determination of bone mineral volume fraction using impedance analysis and Bruggeman model

Measurements by impedance spectroscopy and Bruggeman effective medium approximation model were employed in order to determine the mineral volume fraction of dry bone. This approach assumes that two or more phases are present into the composite: the matrix (environment) and the other ones are inclusion phases. A fragment of femur diaphysis dense bone from a young pig was investigated in its dehydrated state. Measuring the dielectric properties of bone and its main components (hydroxyapatite and collagen) and using the Bruggeman approach, the mineral volume filling factor was determined. The computed volume fraction of the mineral volume fraction was confirmed by a histogram test analysis based on the SEM microstructures. In spite of its simplicity, the method provides a good approximation for the bone mineral volume fraction. The method which uses impedance spectroscopy and EMA modeling can be further developed by considering the conductive components of the bone tissue as a non-invasive in situ impedance technique for bone composition evaluation and monitoring.     

Synthesis of Nickel Phosphide Nanorods as Catalyst for the Hydrotreating of Methyl Oleate

Arrays of nickel phosphide nanorods were successfully synthesized by nanocasting using mesostructured silica SBA-15 as a hard template (HT-Ni₂P). After temperature-programmed reduction of the phosphate precursor infiltrated within the pore walls of SBA-15, the unsupported material was obtained by removing the silica matrix with diluted HF. The pore channel of the SBA-15 template stabilizes the Ni₂P particles, preventing sintering after the high reduction temperature and shaping their elongated morphology. Moreover, HT-Ni₂P catalyst shows an improvement in the textural properties with a significantly higher surface area than the reference sample synthesized in the absence of template. X-ray diffraction revealed that the only crystalline phase present in this material was Ni₂P. On the other hand, transmission electron microscopy shows that the catalyst is mainly constituted by agglomerates of nanorods. Through EDX microanalysis the efficient removal of silicon was confirmed. Under hydrotreating conditions, nanorods of Ni₂P show a fourfold enhancement in the conversion of methyl oleate with respect to conventional Ni₂P synthesized in absence of hard template. Nevertheless, when these data are normalized to surface area, the specific activity of HT-Ni₂P nanorods is significantly lower than that of the conventionally prepared sample. Differences in selectivity were also observed as Ni₂P nanorods favored the decarboxylation reaction leading to a higher yield of n-heptadecane.     

Comparative study between large-scale and small-scale electrochemical potentiokinetic reactivation performed on AISI 316L austenitic stainless steel

This work optimizes the application of electrochemical potentiokinetic reactivation (EPR) to assess the degree of sensitization (DOS) of AISI 316L and compares the large-scale and small-scale EPR with the aim of improving the study of the different zones of AISI 316L welded joints by using an electrochemical minicell. The optimized EPR allows to discriminate better than the standardized EPR among different DOS. Small-scale EPR shows greater sensitivity to assess the DOS than large-scale EPR: (i) at lower deformation levels; (ii) for shorter sensitization times; (iii) when localized microstructural regeneration is caused by the combined effect of deformation and subsequent sensitization.     

Strawberries from integrated pest management and organic farming: Phenolic composition and antioxidant properties

Consumer awareness, pesticide and fertilizer contaminations and environmental concerns have resulted in significant demand for organically grown farm produce. Consumption of berries has become popular among health-conscious consumers due to the high levels of valuable antioxidants, such as anthocyanins and other phenolic compounds. The present study evaluated the influence that organic farming (OF) and integrated pest management (IPM) practise exert on the total phenolic content in 22 strawberry samples from four varieties. Postharvest performance of OF and IPM strawberries grown in the same area in the centre of Portugal and harvested at the same maturity stage were compared. Chemical profiles (phenolic compounds) were determined with the aid of HPLC-DAD/MS. Total phenolic content was higher for OF strawberry extracts. This study showed that the main differences in bioactive phytochemicals between organically and IPM grown strawberries concerned their anthocyanin levels. Organically grown strawberries were significantly higher in antioxidant activity than were the IPM strawberries, as measured by DPPH and FRAP assays.     

The evaluation of a social adaptive website for cultural events

In this paper, we present an evaluation of a social adaptive website in the domain of cultural events, iCITY DSA, which provides information about cultural resources and events that promote the cultural heritage in the city of Turin. Using this evaluation, our objective was to investigate the actual usage of a social adaptive website, in an effort to discover the real behavior of users, the unforeseen correlations among user actions and the consequent interactive behavior, the accuracy of both system and social recommendations and their impact on the users themselves, and the role of tagging in the user modeling process. The major contributions of the paper are manifold: insights into user interactions with social adaptive systems; guidelines for future designs; evaluation of the tagging activity and tag meanings in relation to the application domain and thus their impact on the representation of the user model; and a demonstration of how a combination and interplay of evaluation methodologies (e.g., quantitative and qualitative) can enhance our comprehension of evaluation data.     

Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings

Abstract

Tribological coatings made of MoS₂ and WSe₂ phases and their corresponding combinations with tungsten carbide (WC) were prepared by non-reactive magnetron sputtering of individual targets of similar composition. A comparative tribological analysis of these multiphase coatings was done in both ambient air (30–40% relative humidity, RH) and dry nitrogen (RH<7%) environments using the same tribometer and testing conditions. A nanostructural study using advanced transmission electron microscopy of the initial coatings and examination of the counterfaces after the friction test using different analytical tools helped to elucidate what governs the tribological behavior for each type of environment. This allowed conclusions to be made about the influence of the coating microstructure and composition on the tribological response. The best performance obtained with a WSe_x film (specific wear rate of 2 × 10^?8 mm³ N^–1m^–1 and a friction coefficient of 0.03–0.05) was compared with that of the well-established MoS₂ lubricant material.