The thermal kinetics of texture change and the analysis of texture variability for raw and roasted hazelnuts

Texture changes of hazelnuts which were dry roasted at temperatures from 120 to 180 °C, for durations ranging from 5 up to 60 min, were studied using instrumental analysis. The textural changes in hazelnuts were represented by the fracture force obtained from compression tests. The magnitudes of the parameters for the corresponding texture change model were determined using one step non‐linear regression. The order of the reaction was found by plotting isothermal curves of texture response against time; statistical analysis of the data showed that it was best represented by a first‐order reaction. The rate constants were assumed to have an Arrhenius‐type dependence on temperature. The activation energy and the frequency (pre‐exponential) factor at a reference temperature (150 °C) were determined to be 39.25 kJ mol^?1 and 0.0421 s^?1, respectively. Young's modulus and the fracture stress for roasted hazelnuts were calculated to be 4.93 and 1.54 MPa, respectively. Both roasting temperature and time had significant effects on the textural changes in hazelnuts, and the variability in the texture decreased during the roasting process. The physical properties of hazelnuts were correlated with the texture response. A possible major factor causing the high variability in texture was the internal cavity present at the core of each hazelnut. The development of a model of the thermal kinetics of texture change over a large roasting temperature and time range should allow optimization studies to be used for determining the best roasting schedule in terms of delivering the required product texture.     

Atomically Thin Femtojoule Memristive Device

The morphology and dimension of the conductive filament formed in a memristive device are strongly influenced by the thickness of its switching medium layer. Aggressive scaling of this active layer thickness is critical toward reducing the operating current, voltage, and energy consumption in filamentary‐type memristors. Previously, the thickness of this filament layer has been limited to above a few nanometers due to processing constraints, making it challenging to further suppress the on‐state current and the switching voltage. Here, the formation of conductive filaments in a material medium with sub‐nanometer thickness formed through the oxidation of atomically thin two‐dimensional boron nitride is studied. The resulting memristive device exhibits sub‐nanometer filamentary switching with sub‐pA operation current and femtojoule per bit energy consumption. Furthermore, by confining the filament to the atomic scale, current switching characteristics are observed that are distinct from that in thicker medium due to the profoundly different atomic kinetics. The filament morphology in such an aggressively scaled memristive device is also theoretically explored. These ultralow energy devices are promising for realizing femtojoule and sub‐femtojoule electronic computation, which can be attractive for applications in a wide range of electronics systems that desire ultralow power operation.     

Monitoring of radio frequency tissue ablation in an interventional magnetic resonance environment. Preliminary ex vivo and in vivo results

RATIONALE AND OBJECTIVES: The authors evaluate the feasibility of monitoring radio frequency (RF) ablation in an interventional, open-configuration, 0.5-tesla magnetic resonance (MR) environment. METHODS: Ex vivo and in vivo RF coagulation necrosis were induced in porcine paraspinal muscle tissue using a 300 kHz monopolar RF generator applying 5 to 20 W over 3 to 9 minutes. Images were acquired simultaneous to RF application, after RF application, and in an intermittent mode (60 seconds of RF followed by 15 seconds of MR imaging). Temperature changes were monitored based on amplitude (ex vivo) and phase alterations (in vivo) of a T1-weighted graded refocused echo (GRE) sequence enabling an update every 2.5 seconds. A standardized color-coded subtraction technique enhanced signal changes. Additionally, T2- and T1-weighted spin echo (SE) images were acquired with and without intravenous contrast. Macroscopic coagulation size was compared with lesion size seen on MR images. RESULTS: Although lesion diameters were related directly to applied RF power, the application mode had no significant impact on coagulation size (P > 0.05). As could be expected, MR imaging during RF ablation resulted in major image distortion. Radio frequency effects were seen on images acquired in the continuous and intermittent modes. Coagulation size seen on GRE images correlated well with macroscopy both ex vivo (r = 0.89) and in vivo (r = 0.92). Poorer correlation was found with postinterventional SE sequences (r = 0.78-0.84). CONCLUSIONS: Magnetic resonance monitoring of RF effects is feasible both ex vivo as well as in vivo using temperature-sensitive sequences in an open-configuration MR environment.     

Patterns of psoriatic arthritis in Orientals

OBJECTIVE: To determine the clinical features of psoriatic arthritis (PsA) in a multiethnic Oriental population and to study the effect of ethnicity on disease patterns. METHODS: A retrospective study of 80 patients with PsA seen at either a rheumatology or dermatology referral center. Patients and case records were reviewed and data abstracted according to a standard protocol. Eighty consecutive patients with psoriasis without PsA seen at the dermatology center were recruited as controls. RESULTS: Asymmetric polyarthritis developing in the 4th decade with an equal male to female ratio was the commonest pattern of arthritis among Chinese, Indians, and Malays. Clinically apparent lumbar spondylitis was significantly more common in Indians than Chinese (10/11 vs 11/20, respectively; p = 0.046), although the prevalence of lumbar spondylitis was similar in all ethnic groups. Eighty-nine percent of subjects required nonsteroidal antiinflammatory drugs and 51% required disease modifying antirheumatic drugs at some time for control of joint disease. PsA was significantly more common among Indians compared to the ethnic distribution of the Singapore population (p < 0.000001). Multiple logistic regression identified Indian ethnicity as a risk factor for the development of PsA (OR 2.39, 95% confidence interval 1.02 to 5.60). CONCLUSION: The commonest pattern of PsA in all ethnic groups was asymmetric polyarthritis. Ethnicity affected the development and presentation of PsA in our series: Indians with psoriasis had double the risk of developing PsA compared to Chinese with psoriasis, and lumbar spondylitis when present in Chinese subjects was asymptomatic in 45%, being detectable only on radiological examination.     

Segregation of germ granules in living Caenorhabditis elegans embryos: cell-type-specific mechanisms for cytoplasmic localisation

Extrinsic allergic alveolitis and pulmonary sarcoidosis are granulomatous diseases of the lung for which clinical presentation and anatomic site of granuloma formation differ. Extrinsic allergic alveolitis is caused by inhaled antigens, whereas the nature and source of the inciting antigen in sarcoidosis is unknown. To test the hypothesis that the route via which antigen is introduced to the lung contributes to the clinicopathological presentation of pulmonary granulomatous disease, rats immunized with intravenous (i.v.) Corynebacterium parvum were challenged after 2 weeks with either intratracheal (i.t.) or i.v. C. parvum. The granulomatous inflammation elicited by i.t. challenge predominantly involved alveolar spaces and histologically simulated extrinsic allergic alveolitis. In contrast, the inflammation induced by i.v. challenge was characterized by granulomatous angiitis and interstitial inflammation simulating sarcoidosis. Elevations of leukocyte counts and TNF levels in bronchoalveolar fluid, which reflect inflammation in the intra-alveolar compartment, were much more pronounced after i.t. than after i.v. challenge. Tumor necrosis factor, interleukin-6, CC chemokine, CXC chemokine, and adhesion molecule mRNA and protein expression occurred in each model. In conclusion, i.t. or i.v. challenge with C. parvum in sensitized rats caused pulmonary granulomatous inflammation that was histologically similar to human extrinsic allergic alveolitis and sarcoidosis, respectively. Although the soluble and cellular mediators of granulomatous inflammation were qualitatively similar in both disease models, the differing anatomic source of the same antigenic challenge was responsible for differing clinicopathological presentations.     

Changes in the orientation of the smooth-muscle cells of the tunica media from major arteries under constant lengthwise stretching in situ

It has been shown that changes in the orientation of arterial smooth muscle cells during a constant longitudinal stretching of the artery in vivo are not similar in different sections of the stretching zone. Cells in the proximal and distal sections keep their orientation but this orientation differs from that of smooth muscle cells in the control arteries. Cells in the central part of the stretching region lose their definite orientation to settle randomly.     

Reversible electron-transfer reactions within a nanoscale metal oxide cage mediated by metallic substrates

Transition metal oxides exhibit a rich collection of electronic properties and have many practical applications in areas such as catalysis and ultra-high-density magnetic data storage. Therefore the development of switchable molecular transition metal oxides has potential for the engineering of single-molecule devices and nanoscale electronics. At present, the electronic properties of transition metal oxides can only be tailored through the irreversible introduction of dopant ions, modifying the electronic structure by either injecting electrons or core holes. Here we show that a molybdenum(VI) oxide 'polyoxometalate' molecular nanocluster containing two embedded redox agents is activated by a metallic surface and can reversibly interconvert between two electronic states. Upon thermal activation two electrons are ejected from the active sulphite anions and delocalized over the metal oxide cluster cage, switching it from a fully oxidized state to a two-electron reduced state along with the concomitant formation of an S-S bonding interaction between the two sulphur centres inside the cluster shell.     

Stimulation of large-conductance Ca2+-activated K+ channels by Evans blue in cultured endothelial cells of human umbilical veins

The effect of Evans blue (EB) on large-conductance Ca2+-activated K+ (BKCa) channels was investigated in cultured endothelial cells of human umbilical veins. In whole-cell configuration, EB (50 microM) reversibly increased the amplitude of K+ outward currents (IK). When the patch pipettes were filled with 10 mM EGTA, its stimulatory effect on IK was unaltered. Further application of EB in the presence of suramin, a blocker of P2-purinergic receptor, or AOPCP, an inhibitor of 5'-nucleotidase, still increased IK. However, charybdotoxin (100 nM) suppressed EB-induced increase in IK. In inside-out configuration, bath application of EB (50 microM) did not change single channel conductance but significantly increased the activity of BKCa channels. The EB-induced increase in the activity of BKCa channels was independent on internal Ca2+. EB (50 microM) shifted the activation curve of BKCa channels to less positive membrane potentials by approximately 20 mV. The change in the kinetic behavior of BKCa channels caused by EB in these cells is due to an increase in mean open time and a decrease in mean closed time. These results indicate that EB can stimulate the activity of BKCa channel in endothelial cells. This effect is unrelated to its blockade of P2-purinergic receptors or inhibition of 5'-nucleotidase. The direct stimulation of these ionic channels by EB may contribute to its effect on capillary permeability.     

Active Micromachined Integrated Terahertz Circuits

Schottky barrier diodes have been integrated into on-chip rectangular waveguides. Two novel techniques have been developed to fabricate diodes with posts suitable for integration into waveguides. One technique produces diodes with anode diameters of the order of microns with post heights from 90 to 125 microns and the second technique produces sub-micron anodes with post heights around 20 microns. A method has been developed to incorporate these structures into a rectangular waveguide and provide a top contact onto the anode which could be used as an I.F. output in a mixer circuit. Devices have been fabricated and D.C. characterized.