Experimental analysis of corner-fed printed square patch antennas

An experimental analysis is developed for the corner-fed printed square patch antenna, taking into account the width of the feeding junction and the proximity of the microstrip feedline. New accurate design relations for resonance frequency and input impedance are deduced, directly usable for the computer aided design of printed antenna arrays.<>     

Use of transfer++factor in allergic bronchial asthma

The therapeutic panorama of immunomodulation and its effects on the modification of the immune reaction is reviewed. Particular reference is made to the transfer factor as a therapeutic element in bronchial asthma, which insures its efficacy or innocuity.     

Entanglement network and relaxation temperature dependence of single‐site catalyzed ethylene/1‐hexene copolymers

In this work, we investigate the linear viscoelastic response of high molecular weight ethylene/1‐hexene copolymers, characterized by a narrow molecular weight distribution and comonomer content in the range from 0 to 10 mol %. A variation in the entanglement plateau modulus has been found in agreement with the recently developed packing length model. The packing model applied to viscoelastic data suggests decreased values of the characteristic ratio, accordingly with recent computer simulation results. The flow activation energy increases as the side chain content increases. This feature is thought to be related to the mobility of the molecules. The presence of side branches due to the comonomer hinders the mobility of the molecules, and increases the thermal barrier for the segmental motion. Then in the comonomer content range studied, the increase of the flow activation energy goes parallel with a decrease in the characteristic ratio. This result suggests that more parameters than only the stiffness of the chain modulate the thermal dependence of viscoelastic properties. A more refined study is necessary combining experiments with computer simulations in order to elucidate these aspects. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

WO3 pillar-type and helical-type thin film structures to be used in microbatteries

In the present study WO₃ thin films were deposited by sputtering onto ITO glass, W/ITO and Si substrates by using the glancing angle deposition (GLAD) technique, with the objective of applying these materials in electrochemical intercalation devices. The thin films microstructure and electrochemical behavior were determined through scanning electron microscopy (SEM) and cycling at constant current with potential limitation. By mainly adjusting the substrate holder speed rotation, pillar-type and helical-type structures were obtained under high and low speed rotation levels, respectively. The electrochemical results showed that the best charge capacity performance was obtained for the WO₃/W/ITO films with pillar-type structures, which are more porous.     

SIR-C data quality and calibration results

The SIR-C/X-SAR imaging radar took its first flight on the Space Shuttle Endeavour in April 1994 and flew for a second time in October 1994. This multifrequency radar has fully polarimetric capability at L- and C-band, and a single polarization at X-band (X-SAR). The Endeavour missions were designated the Space Radar Laboratory-1 (SRL-1) and -2 (SRL-2). Calibration of polarimetric L- and C-band data for all the different modes SIR-C offers is an especially complicated problem. The solution involves extensive analysis of pre-flight test data to come up with a model of the system, analysis of in-flight test data to determine the antenna pattern and gains of the system during operation, and analysis of data from over fourteen calibration sites distributed around the SIR-C/X-SAR orbit track. The SRL missions were the first time a multifrequency polarimetric imaging radar employing a phased array antenna has been flown in space. Calibration of SIR-C data products involved some unique technical problems given the complexity of the radar system. In this paper, the approach adopted for calibration of SIR-C data is described and the calibration performance of the data products is presented     

Geographic distribution and clinical description of leishmaniasis cases in Peru

Asymmetric acetylcholinesterase (AChE) is anchored to the basal lamina (BL) of cholinergic synapses via its collagenic tail, yet the complement of matrix receptors involved in its attachment remains unknown. The development of a novel overlay technique has allowed us to identify two Torpedo BL components that bind asymmetric AChE: a polypeptide of approximately 140 kDa and a doublet of 195-215 kDa. These were found to stain metachromatically with Coomassie blue R-250, were solubilized by acetic acid, and were sensitive to collagenase treatment. Upon sequence analysis, the 140 kDa polypeptide yielded a characteristic collagenous motif. Another AChE-binding BL constituent, identified by overlay, corresponded to a heparan sulfate proteoglycan. Lastly, we established that this proteoglycan, but not the collagenous proteins, interacted with at least one heparin binding domain of the collagenic tail of AChE. Our results indicate that at least two BL receptors are likely to exist for asymmetric AChE in Torpedo electric organ.     

Failure pressure evaluation of the containment building of a large dry nuclear power plant

The evaluation of the failure pressure of the containment building of a large dry PWR-W three loops nuclear power plant, based on computer numerical simulation, is described in this paper. The proposed method considers fully three-dimensional finite element models in order to take into account the effect of the most significant structural characteristics (presence of three buttresses, penetrations, additional reinforcement around the penetrations, etc.), the lack of symmetry of the forces generated by the prestressing system, as well as the nonlinear behaviour of the materials and the sensitivity of the results to uncertainties associated with several parameters. The computational model is completely described, including the constitutive equations for the concrete, the reinforcing steel and prestressing tendons, the spatial discretization—isoparametric elements including the reinforcement are used. The structural models and the analyses performed for their calibration are also described. The influence on the failure pressure of incorporating the foundation slab in the structural model, and the influence of the thermal effects, are discussed. One of the conclusions of the numerical study is that the failure process can be appropriately simulated by means of a structural model which does not include either the foundation slab or the thermal effects. Finally, results of a probabilistic simulation of the failure pressure are given.     

Conductive PE-carbon composites by elongation flow injection moulding

In Part 1 and Part 2 of this paper the preparation of linear polyethylene (PE)-carbon black processed composites with conducting electrical properties was examined by means of elongation flow injection moulding. Mould geometry was optimized in the form of oriented double-armed bars so as to give enhanced mechanical properties combined with a high degree of electrical homogeneity. The present paper deals with composites using a high molecular weight PE matrix. It is shown that the injection-moulded composite material exhibits not only a lower percolation threshold, _c, than the conventionally pressure-moulded isotropic sample, but also conductivities two to three orders of magnitude larger than the latter. The radial and axial conductivity profiles, for concentrations well above _c, are discussed in the light of the molecular orientation variations across the bars as determined by birefringence. A segregation of primary filler particles, during flow-induced orientation, into axial channels has been shown to explain the enhancement of conductivity detected in the injected mouldings. In addition, for filler concentrations near 7%, -profile analysis indicates the development of a uniform conductive-stiff inner cylinder, several millimetres wide, homogeneously extending along the full length of the injected material.